• 한국기계가공학회지
• /
• 제11권5호
• /
• pp.1-7
• /
• 2012

The transportation is almost dependent on a single fuel petroleum with transportation energy dilemma. Hybrid Electric Vehicle(HEV) technology holds more advantages on efficiency improvements for petroleum consumption at the transportation. And bearing is recognized as the important component of gearbox. Gearboxes for HEV transmission have been ensured the highest reliability over some years in withstanding high dynamic loads. At the same time, the demands of lightweight design and cost minimization are required by thought-out design, high-quality material, superior production quality and maintenance. In order to design a reliable and lightweight gearbox, it is necessary to analyze bearing rating life methods between standard and different bearing companies with calculation methods for modification factors. In this paper, the influence of life time of bearings will be pointed out. Bearing contact stress and load stress distribution of HEV gearbox are obtained and compared with Romaxdesigner and BearinX. And the unequal wear of the left bearing for the gearbox intermediate shaft is investigated between simulation and test.

• 한국소음진동공학회논문집
• /
• 제17권11호
• /
• pp.1093-1101
• /
• 2007

This study presents the design improvement process for door module. Its objective evades the resonance generated at module plate due to the operation of window regulator motor. For this study, the design improvement process is composed of experimental methods having three steps. First step is modal analysis at door assembly status for acquisition of dynamic characteristics which are modal frequency and damping. Second step is a vibration experiment to get the test mode considered an efficiency of window regulator motor. Last step is a vibration measurement by the form of $6{\times}6$ array on module plate. A vibration measurement of $6{\times}6$ array form can be got to three analysis results which are a transfer path of vibration using cross correlation function, a vibration map using OA level and a contribution by frequency band using coherent output power spectrum on module plate. These results are applied to SDM(structural dynamic modification) for design improvement to get around the resonance on module plate by the excitation of window regulator motor.

• 한국철도학회논문집
• /
• 제9권6호
• /
• pp.746-752
• /
• 2006

The major objective of this study is to investigate the dynamic behavior evaluation of split PC sleepers for railway turnout by the field test. In railway engineering, a turnout is necessary to allow a vehicle to move from one track to another. So, turnout is required very complex railway technologies such as lolling stock, track. In reference to conventional line speed-up and improvement railway, accurate assembly of turnout affects travel ins qualify of turnout area and running safety. Because of heavy weight and a large volume of the long sleeper used to turnout and car limit, transport and the prerequisite for trouble-free transport of the factory pre-assembled major turnout components is achieved through division of long sleepers. The one of the advantages for using a split sleeper is to reduce the dynamic vibration according to the information of developed nations. Therefore, we investigate the characteristic of dynamic behaviors of split sleepers which are adopted for the first time to improve performance of turnout From the field test results of the split sleeper, it is evaluated that the modification of weight, material and stiffness compared with wood sleeper is very effective for the ballast safety. However, the decrease in vibration of split sleeper was not found out.

• 한국기계가공학회지
• /
• 제11권4호
• /
• pp.25-30
• /
• 2012

The transportation is almost dependent on a single fuel petroleum with transportation energy dilemma. Hybrid Electric Vehicle(HEV) technology holds more advantages on efficiency improvements for petroleum consumption at the transportation. And bearing is recognized as the important component of gearbox. Gearboxes for HEV transmission have been ensured the highest reliability over some years in withstanding high dynamic loads. At the same time, the demands of lightweight design and cost minimization are required by thought-out design, high-quality material, superior production quality and maintenance. In order to design a reliable and lightweight gearbox, it is necessary to analyze bearing rating life methods between standard and different bearing companies with calculation methods for modification factors. In this paper, the influence of life time of bearings will be pointed out. Bearing contact stress and load stress distribution of HEV gearbox are obtained and compared with Romaxdesigner and BearinX. And the unequal wear of the left bearing for the gearbox intermediate shaft is investigated between simulation and test.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.960-965
• /
• 2014

Transmission loss of specimen is calculated by measuring energy of incident and transmission and using reverberant room of large size. But normal measurement of transmission loss has trouble because it is actually demanded that large area and specimen of certain size is satisfied with condition of diffused sound field. Especially, in case of mechanical component, interested frequency band is mid-frequency band between 500 ~ 2k Hz, and it is used to be available to minimize a reverberation chamber under conditions satisfying acoustic one because production of specimen for transmission loss measurement has limit. But, as in semi-reverberation room, it is difficult to satisfy condition of diffuse sound field and modification factor is applied to complement that. Correction factor when measuring transmission loss using semi-reverberation chamber is required accuracy because it works as main factor determining reliability of reuslts on transmission loss. In this study, it is analyzed that an effect on correction factor based on varying materials and sizes of specimens in order to deduction of it. Also It is confirmed that applied by elicited correction factor with actual railway vehicle's floor has reliability.

• Journal of Biosystems Engineering
• /
• 제30권6호통권113호
• /
• pp.354-359
• /
• 2005

This is a fundamental study to develop a bio-gas utilization technology using livestock manure. Especially, this study was carried out to develop an engine using bio-gas. A bio-gas engine was designed and manufactured by modification of a diesel engine of 3 cylinders powering 13.31 kW/2800 rpm, changing the fuel supplying system fit for bio-gas. The result showed that, when the Air/Fuel ratio was controlled with fixed spark timing, the power of biogas-fueled engine is about $10.6{\~}14.6\%$ lower then that of LNG-fueled engine because of low volumetric efficiency. The engine output and torque was $11.85{\~}13.3$ kW, $39.5{\~}40.8\;N{\cdot}m$, respectively at the engine speed of 2600 rpm. Bio-gas consumption rate was 260.20 g/kW/hr, 315.20 g/kW/hr in engine speed or 1000 rpm, 2800 rpm, respectively.

• 대한치과의사협회지
• /
• 제53권12호
• /
• pp.926-934
• /
• 2015

Obstructive sleep apnea (OSA), most common respiratory disorder of sleep, is characterized by intermittent partial or complete occlusions of the upper airway due to loss of upper airway dilating muscle activity during sleep superimposed on a narrow upper airway. Termination of these events usually requires arousal from sleep and results in sleep fragmentation and hypoxemia, which leads to poor quality of sleep, excessive daytime sleepiness, reduced quality of life and numerous other serious health consequences. Untreated OSA may cause, or be associated with, several adverse outcomes, including daytime sleepiness, increased risk for motor vehicle accidents, cardiovascular disease, and depression. Various treatments are available, including non-surgical treatment such as medication or modification of life style, continuous positive airway pressure (CPAP) and oral appliance (OA). Skeletal surgery for obstructive sleep apnea (OSA) aims to provide more space for the soft tissue in the oropharynx to prevent airway collapse during sleep. Conventional surgical techniques include uvopalatopharyngoplasty(UPPP), genioglossus advancement (GA), and maxillomandibular advancement (MMA). Surgical techniques, efficacy and complications of skeletal surgery are introduced in this review.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.447-453
• /
• 2006

The major objective of this study is to investigate the fatigue behavior evaluation of immovability crossing for railway turnout by the field test. In railway engineering, an appliance is necessary to allow a vehicle to move from one track to another. This appliance came to be known technically as turnout. So, turnout is required very complex railway technologies such as rolling stock, track. Due to the plan under the application of high speed train, turnout are needed more stable for fatigue behaviors. It analyzed the mechanical behaviors of turnout crossing with propose its advanced technical type on the field test and fatigue evaluation for the dynamic fatigue characteristics. As a result, the advanced type crossing are obviously effective for the fatigue damage ratio and dynamic response which is non-modified type. The analytical and experimental study are carried out to investigate the passing path of contact surface and fatigue damage trend decrease dynamic stresses and deflections on advanced crossing type. And the advanced type reduce dynamic fatigue damage ratio and increase fatigue life(about each 38%)more than non-modified type. From the field test results of the servicing turnout crossing, it is evaluated that the modification of contact angle, weight, material and sectional properties is very effective for ensure against fatigue risks.

• Tribology and Lubricants
• /
• 제39권5호
• /
• pp.173-182
• /
• 2023

The composite planetary gear reducer, a power transmission component of armored vehicles, operates at a high torque and is used in severe environments such as mountain, gravel or unpaved roads. Therefore, they must be designed and manufactured to have high durability. To design such a planetary gear reducer, there are numerous specifications to validate, such as selecting the module and the number of teeth of each gear satisfied the requirements, and calculating gear specifications and durability strength. Because planetary gears constitute a combination of several gears, there are many restrictions and interferences in selecting the number of teeth and addendum modification coefficients, and designing the tooth shape. Developing an auto design program is necessary to design various planetary gears more conveniently and quickly. In this study, a planetary gear reducer design software, widely used in various machines and armored vehicles, was developed. This design software can automatically select the number of teeth and modules of the gears, calculate specifications and quickly evaluate its fatigue durability strength and scoring failure according to the planetary gear reducer design theory.

• 한국음향학회지
• /
• 제37권5호
• /
• pp.292-299
• /
• 2018

자동차 외장 디자인은 차량의 첫인상을 만들지만, 엔지니어링 입장에서는 공력 및 바람소리 성능에 중요한 요소이다. 외장 디자인은 차량의 프로토 타입 시점에 변경하기는 불가능하기 때문에 차량 초기 디자인 단계에서 외장 디자인을 점검하고, 바람소리 수준을 예측하는 것이 중요하게 된다. 외장 디자인 요소 중 차량 바람소리에 중요한 A필라와 와이퍼에 대한 바람소리 해석 기법은 개발되어 적용되고 있으나, 해석 및 모델링 과정이 복잡하고 시간이 많이 소모되기 때문에 엔지니어입장에서 디자이너 및 설계자와 함께 A필라 및 와이퍼 형상별 기여도를 검토하기엔 시간적인 여유가 부족하게 된다. 본 논문에서는 최적화를 위하여 A필라 형상 및 와이퍼 형상에 따라 바람소리 해석 S/W인 PowerFLOW(PowerClay 모델링 S/W, SEA-Baced(Statistical Energy Analysis-Based) 실내소음 해석툴, Turbulent Acoustic Power 해석툴)를 이용하여 실내소음을 해석적으로 예측하고, 예측한 결과를 이용하여 반응 표면법을 이용하는 최적화 S/W인 modeFRONTIER를 이용하여 디자인 요소에 대한 반응면을 구축하여, 디자인 요소와 실내 소음간의 상관성을 구성하여, 디자인 단계에서 A필라와 와이퍼에 의한 바람소리 수준을 예측하였다. 최적화 결과 및 반응면 구축 예측 결과에 대하여 실제 시험을 통하여 예측 경향성을 판단하고, 해석 및 예측에 대한 신뢰성을 확인하였다. 최종적으로 해석 및 반응면 구축 과정을 통하여 A필라 및 와이퍼에 대한 차종별 CAT(Computer Aided Test) 분석툴을 개발하고, 실제 차량 개발 과정에 적용하여 효용성을 확인하였다.