• 항공우주시스템공학회지
• /
• 제17권4호
• /
• pp.87-94
• /
• 2023

본 논문은 항공기의 성능개량에 필수 수반되는 신규 및 변경 장비 장착부에 기체구조물 개조 및 장착설계를 수행한 연구이다. 항공기 외부에 장착되는 대표적인 성능개량 장비로는 안테나, 레이더, 전자광학/적외선 표적지시장치(EO/IR) 및 자체방어체계 장비 등이 있으며, 운용을 위해서 기본항공기의 구조보강, 개조 및 장착설계가 수행된다. 항공기 내부에는 사용자 운용 요구도에 맞게 콘솔과 랙 구조물이 개조 또는 추가된다. 또한 성능개량을 위해 교체 및 추가되는 장비의 장착설계와 이에 따른 내부 냉각을 위한 환경제어계통 구성품 개조가 수반된다. 성능개량 항공기의 구조건전성, 운용성 및 정비성이 확보된 기체구조물의 상세설계로 감항 적합성이 검증된 엔지니어링 과정과 사례를 제시하였다.

• Membrane and Water Treatment
• /
• 제15권1호
• /
• pp.21-29
• /
• 2024

1H,1H,2H,2H-perfluorodecytriethoxysilane (C₁₆H₁₉F₁₇O₃Si) be successfully applied to the hydrophobic modification of Al₂O₃ tubular ceramic membrane. Taking the concentration of modification solution, modification time, and modification temperature as factors, orthogonal experiments were designed to study the hydrophobicity of the composite membranes. The experiments showed that the modification time had the greatest impact on the experimental results, followed by the modification temperature, and the modification solution concentration had the smallest impact. Concentration of the modified solution 0.012 mol·L^-1, modification temperature 30 ℃ and modification time 24 h were considered optimal hydrophobic modification conditions. And the pure water flux reached 274.80 kg·m^-2·h^-1 at 0.1MPa before hydrophobic modification, whereas the modified membrane completely blocked liquid water permeation at pressures less than 0.1MPa. Air gap membrane distillation experiments were conducted for NaCl (2wt%) solution, and the maximum flux reached 4.20 kg·m^-2·h^-1, while the retention rate remained above 99.8%. Given the scarcity of freshwater resources in coastal areas, the article proposed a system for seawater desalination using air conditioning waste heat, and conducted preliminary research on its freshwater production performance using Aspen Plus. Finally, the proposed system achieved a freshwater production capacity of 0.61 kg·m^-2·h^-1.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2019년도 춘계학술대회
• /
• pp.508-509
• /
• 2019

모바일 환경에서 데이터베이스 엔진 사용이 보편화되고 있으며 모바일에 적합한 데이터베이스 엔진 개발과 발표가 뒤따르고 있다. 모바일 데이터베이스는 대부분 플래시 메모리로 구성한 다양한 파일시스템에서 관리된다. 이 논문에서는 대표적인 모바일 데이터베이스인 SQLite3의 파일 시스템별 갱신 성능을 테스트한다. 그래서 각 파일 시스템별 특성을 파악하고 비교하기 위한 시스템을 구현하고 성능 실험을 실시한다. 실험 결과로부터 각 데이터베이스 갱신 패턴에 따른 파일 시스템별 장단점을 분석할 수 있다.

• International journal of advanced smart convergence
• /
• 제1권1호
• /
• pp.34-37
• /
• 2012

In a storage system, the performance of data deduplication can be increased if we consider the file modification pattern. For example, if a file is modified at the end of file region then fixed-length chunking algorithm superior to variable-length chunking. Therefore, it is important to predict in which location of a file is modified between files. In this paper, the essential idea is to exploit an efficient file pattern checking scheme that can be used for data deduplication system. The file modification pattern can be used for elaborating data deduplication system for selecting deduplication algorithm. Experiment result shows that the proposed system can predict file modification region with high probability.

• Membrane and Water Treatment
• /
• 제6권4호
• /
• pp.323-337
• /
• 2015

Membrane Fouling was considered as major drawback in various industrial applications. Thus, this paper reviews the surface modification of polyethersulfone (PES) membranes for antifouling performance. Various modification techniques clearly indicate that hydrophilicity has to improve on the PES membrane surface. Moreover, the mechanism of fouling reduction with corresponds to various modification methods is widely discussed. Incorporation of hydrophilic functional groups on PES membrane surface enhances the surface free energy thereby which reduces the fouling. Characterization techniques adopted for the surface modified membranes was also discussed. These studies might be useful for the other researchers to utilize the modification technique for the applications of waste water treatment, chemical process industry and food industry.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 추계학술대회 논문집
• /
• pp.929-930
• /
• 2012

• Bulletin of the Korean Chemical Society
• /
• 제35권5호
• /
• pp.1305-1311
• /
• 2014

The nickel oxide, the most widely used cathode material for the molten carbonate fuel cell (MCFC), has several disadvantages including NiO dissolution, poor mechanical strength, and corrosion phenomena during MCFC operation. The surface modification of NiO with lanthanum maintains the advantages, such as performance and stability, and suppresses the disadvantages of NiO cathode because the modification results in the formation of $LaNiO_3$ phase which has high conductivity, stability, and catalytic activity. As a result, La-modified NiO cathode shows low NiO dissolution, high degree of lithiation, and mechanical strength, and high cell performance and catalytic activity in comparison with the pristine NiO. These enhanced physico-chemical and electrochemical properties and the durability in marine environment allow MCFC to marine application as a auxiliary propulsion system.

• 대한기계학회논문집A
• /
• 제20권12호
• /
• pp.3782-3791
• /
• 1996

A great deal of effert has been invested in upgrading the performance and the efficiency of mechanical structures. Using experimental modal analysis(EMA) or finite element analysis(FEA) data of mechanical structures, this performance and efficiency can be effectively evaluated. In order to analyze complex structures such as automobiles and aircraft, for the sake of computing efficiency, the dynamic substructuring techniques that allow to predict the dynamic behavior of a structure based on that of the composing structures, are widely used. By llinking a modal model obtained from EMA and an analytical model obtained from FEA, the best conditioned structures can be desinged. In this paper, a new algorithm for structural dynamic modification-SRFSM (substructure response function sensitivity method) is proposed by linking frequency responce function synthesis and response function sensitivity. A mehtod to obtain response function sensitivity using direct derivative of mechanical impedance, is also used.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2002년도 추계 학술발표회 논문집
• /
• pp.189-196
• /
• 2002

The capacity of CFS piers has not been used to a practical design, because there is no guide of a seismic design for CFS piers. Therefore, the guide of a seismic design value is derived from tests of CFS piers in order to apply it to a practical seismic design. Steel piers and concrete-filled steel piers are tested with constant axial load using quasi-static cyclic lateral load to check ductile capacity and using the real Kobe ground motion of pseudo-dynamic test to verify seismic performance. The results prove that CFS piers have more satisfactory ductility and strength than steel piers and relatively large hysteretic damping in dynamic behaviors. The seismic performance of steel and CFS piers is quantified on the basis of the test results. These results are evaluated through comparison of both the response modification factor method by elastic response spectrum and the performance-based design method by capacity spectrum and demand spectrum using effective viscous damping. The response modification factor of CFS piers is presented to apply in seismic design on a basis of this evaluation for a seismic performance.

• 한국강구조학회 논문집
• /
• 제22권1호
• /
• pp.75-85
• /
• 2010

최근 초고층 건물에 구조적인 측면을 고려한 Freeform Structure라는 개념이 등장하고 있다. 이 형태는 Diagrid, Cantilevered, Tilted로 대변될 수 있는데 특히 다이아 그리드 시스템은 횡저항에 하중의 흐름을 가새 프레임을 따라 분산시킴으로써 효율적인 거동을 보이기 때문에 그만큼 부재를 경량화시킬 수가 있다. 그러나 Diagrid 구조시스템의 내진성능 평가를 위한 반응수정계수에 대한 신뢰성 있는 자료가 없기 때문에 우수한 내진성능이 예상됨에도 불구하고 기타구조 등으로 설계되고 있다. 본 연구에서는 실대형 실험을 통해 Diagrid 구조의 반응수정계수를 실험적으로 규명하고자 한다.