• 대한음성학회지:말소리
• /
• 제60호
• /
• pp.181-190
• /
• 2006

This paper describes a speech enhancement scheme that leads to significant improvements in recognition performance when used in the ASR front-end. The proposed approach is based on adaptive comb filtering and an MMSE-related parameter estimator. While adaptive comb filtering reduces noise components remarkably, it is rarely effective in reducing non-stationary noises. Furthermore, due to the uniformly distributed frequency response of the comb-filter, it can cause serious distortion to clean speech signals. This paper proposes an improved comb-filter that adjusts its spectral magnitude to the original speech, based on the speech absence probability and the gain modification function. In addition, we introduce the modified comb filtering-based speech enhancement scheme for ASR in mobile environments. Evaluation experiments carried out using the Aurora 2 database demonstrate that the proposed method outperforms conventional adaptive comb filtering techniques in both clean and noisy environments.

• 대한조선학회논문집
• /
• 제46권6호
• /
• pp.562-568
• /
• 2009

Hull form generation and variation methods to be mainly discussed in this study are based on the fairness optimized B-Spline form parameter curves (FOBFC). These curves can be used both as indirect modification function for variation and as geometric entities for hull form generation. The flexibility and functionality of geometric control technique play the most important role for the success of hull form optimization. This study shows the hydrodynamic optimization process and the characteristics of optimum design hull forms of a 14,000TEU containership and 60K LPG carrier. SHIPFLOW has been used as a CFD solver and FS-Framework as a geometric modeler and optimizer.

• 대한수학회논문집
• /
• 제20권4호
• /
• pp.837-847
• /
• 2005

We consider multiobjective fractional programming problems with generalized invexity. An equivalent multiobjective programming problem is formulated by using a modification of the objective function due to Antczak. We give relations between a multiobjective fractional programming problem and an equivalent multiobjective fractional problem which has a modified objective function. And we present modified vector saddle point theorems.

• 한국구조물진단유지관리공학회 논문집
• /
• 제8권4호
• /
• pp.107-114
• /
• 2004

본 논문에서는 복합적층판의 유한요소해석을 위해 직접수정법으로 간단히 개선된 8절점 유한요소를 제안하였다. 우선, 9절점 등매개변수 요소와 동일한 조건하에서 이차다항식을 표현할 수 있도록 형상함수를 수정하며, 이를 외시적(explicit)으로 표현하였다. 전단보정계수를 갖는 1차전단변형이론을 고차전단변형이론에 근거하여 간단히 개선함으로써 두께방향으로 전단응력 및 변형률이 포물선 분포를 가지도록 하였다. 더 이상의 전단보정계수가 필요하지 않다. 따라서 간단한 직접수정법 즉, 형상함수의 수정, 1차전단변형이론의 개선 및 가정변형률을 조합함으로써 8절점 유한요소의 성능을 개선하였다. 제안된 유한요소를 이용하여 복합적층판의 정적, 좌굴 및 자유진동 수치해석을 실시하여 비교 검증하였다.

• Journal of Chest Surgery
• /
• 제32권10호
• /
• pp.903-909
• /
• 1999

Background: The current study was undertaken to investigate the results of a modification in the conventional Maze III Procedure devised by the authors. The aim of the technical modification was in improving the left atrial contractility. Material and Method: Between July 1997 and December 1998, 34 patients with chronic atrial fibrillation for more than 1 year duration underwent a modified Maze III procedure. The assessment of the left atrial function was made by various echocardiographic measurements and SA nodal recovery was evaluated by HRV Holter monitoring. Result: All 34 patients were in sinus rhythm. On echocardiography, right atrial contraction was detected in 32 patients(94.1%) and left atrial contraction in 33 patients(97.1%). The echocardiographic A wave at 1, 6, and 12 months or more were 50.5$\pm$31.5, 62.1$\pm$25.1, 66$\pm$20.6 cm/sec, respectively, and the E wave measurements at the same time points were 152$\pm$31.1, 134.4$\pm$35.2, 133$\pm$27.5 cm/sec. The corresponding A/E ratios were 0.32$\pm$0.13, 0.48$\pm$0.18, 0.5$\pm$0.15, showing a rising trend. Treadmill evaluation at 6 months showed a mean 82% increase in heart rate after excising, and the SDNN and SDANN upon HRV Holter at 1 and 3 months postoperatively were 65.3$\pm$28.1/87.8$\pm$27.2 ms, and 60.0$\pm$24.1/83.4$\pm$25.7 ms, respectively, showing a predoinant autonomic recovery in the parasympathetic system(PSDNN = 0.01, PSDANN =0.015). Conclusion: The results of our data suggest that the current modification in the conventional Maze III Procedure was efective in enhancing the postoperative left atrial contractility.

• 한국정보통신학회논문지
• /
• 제12권2호
• /
• pp.378-384
• /
• 2008

헬스케어 응용 서비스를 위한 센서 네트워크는 사람 또는 이동성을 가진 사물을 주요 센싱 대상으로 한다. 이러한 센싱 대상들의 이동에 따른 노드간 상호작용을 지원하기 위해서는 노드의 동적 기능변경, 동적 자기구성, 에너지 효율성을 고려하여야 한다. 본 논문에서는 노드간 에이전트 전이를 통해 동적 기능 변경을 지원하는 Agilla 모델과 노드간 계층적 클러스터의 구성을 통한 동적 자기구성, 에너지 효율성을 보장하는 LEACH 프로토콜에 대해 분석 한다. 이 분석 결과를 기반으로 노드간 동적 기능변경을 지원하는 Mobility Agent Middleware를 설계하고, 기존 LEACH 프로토콜의 취약점인 노드 이동성을 보장하는 LEACH_Mobile 프로토콜을 제안한다. 또한 LRACH_Mobile 프로토콜을 지원하는 라우팅 모듈을 설계하고 Mobility Agent Middleware와의 연동을 위한 인터페이스를 설계하였다. 그리고 LEACH_Mobile 프로토콜의 시뮬레이션 결과를 통해 이동 노드에 대한 데이터 전송 성공률의 명확한 성능 향상을 보여준다.

• 한국생산제조학회지
• /
• 제9권2호
• /
• pp.66-71
• /
• 2000

Laser induced surface hardening of Tool steel(STC5) can be achieved either with or without surface melting. In trans-formation hardening as the surface is heated to a temperature below its melting point and is rapidly cooled solidified microstructures are usually much finer and stronger than those of the base matals. For this reason surface modification of tool steel by YAG laser irradiation has been studied as a function of processing parameters such as power density pulse width defocusing distance and molten depth. The high energy density changes and refines the microstructure of the near surface layer. In the case of beam passes martensite formed in the melt zone exhibited very high vickers hardness values. Molten depth and width depend on defocusing distance and energy of black color painting is more absorptive than other color painting.

• Toxicological Research
• /
• 제29권2호
• /
• pp.81-86
• /
• 2013

Toxicoproteomics integrates the proteomic knowledge into toxicology by enabling protein quantification in biofluids and tissues, thus taking toxicological research to the next level. Post-translational modification (PTM) alters the three-dimensional (3D) structure of proteins by covalently binding small molecules to them and therefore represents a major protein function diversification mechanism. Because of the crucial roles PTM plays in biological systems, the identification of novel PTMs and study of the role of PTMs are gaining much attention in proteomics research. Of the 300 known PTMs, protein acylation, including lysine formylation, acetylation, propionylation, butyrylation, malonylation, succinylation, and crotonylation, regulates the crucial functions of many eukaryotic proteins involved in cellular metabolism, cell cycle, aging, growth, angiogenesis, and cancer. Here, I reviewed recent studies regarding novel types of lysine acylation, their biological functions, and their applicationsin toxicoproteomics research.

• 대한음성학회지:말소리
• /
• 제59호
• /
• pp.69-87
• /
• 2006

Among the conventional time-scale modification (TSM) methods, the synchronized overlap and add (SOLA) method is widely used due to its good performance relative to computational complexity But the SOLA method remains complex due to its synchronization procedure using the normalized cross-correlation function. In this paper, we introduce a computationally efficient SOLA method utilizing 3 level center clipping method, as well as zero-crossing and level-crossing information. The result of subjective preference test indicates that the proposed method can reduce the computational complexity by over 80% compared with the conventional SOLA method without serious degradation of synthesized speech quality.

• 열처리공학회지
• /
• 제13권3호
• /
• pp.170-176
• /
• 2000

A novel method for improving the adhesion of diamond films on cemented carbide tool inserts has been investigated. This method is based on the formation of a compositionally graded interface by developing a microrough surface structure using a pulsed laser process. Residual stresses of diamond films deposited on laser modified cemented carbides were measured as a function of substrate roughness using micro-Raman spectroscopy. The surface morphology and roughness of diamond films and cemented carbides were also investigated at different laser modification conditions. It was found that the increasing interface roughness reduced the average residual stress of diamond films, resulting in improved adhesion of diamond films on cemented carbides.