• Atmosphere
• /
• v.26 no.1
• /
• pp.19-33
• /
• 2016

Water vapor in the atmosphere is an important element that generates various meteorological phenomena and modifies a hydrological cycle. In general, the Yeongdong region has a lot of snow compared to the other regions in winter due to the complex topography and an adjacent East Sea. However, the phase change from water vapor to ice cloud and further snowfall has little been examined in detail. Therefore, in this study, we investigated phase change of liquid water in terms of a quantitative budget as well as time lag of water vapor conversion to snowfall in the ESSAY (Experiment on Snow Storms At Yeongdong) campaign that had been carried out from 2012 to 2015. First, we classified 3 distinctive synoptic patterns such as Low Crossing, Low Passing, and Stagnation. In general, the amount of water vapor of Low Crossing is highest, and Low Passing, Stagnation in order. The snowfall intensity of Stagnation is highest, whereas that of Low Crossing is the lowest, when a sharp increase in water vapor and accordingly a following increase in precipitation are shown with the remarkable time lag. Interestingly, the conversion rate of water vapor to snowfall seems to be higher (about 10%) in case of the Stagnation type in comparison with the other types at Bukgangneung, which appears to be attributable to significant cooling caused by cold surge in the lower atmosphere. Although the snowfall is generally preceded by an increase in water vapor, its amount converted into the snowfall is also controlled by the atmosphere condition such as temperature, super-saturation, etc. These results would be a fundamental resource for an improvement of snowfall forecast in the Yeongdong region and the successful experiment of weather modification in the near future.

• The Journal of Korean Medicine
• /
• v.23 no.1
• /
• pp.67-82
• /
• 2002

Objectives: In recent years, extensive focus has been laid on adulteration of herbal medicine with heavy metals. This may be mainly due to soil contamination by environmental pollution. The objective of this study is to identify the contents of various heavy metals in the blood from Ohjeok-san (Wuji-san) Decoction (OD) treated-rats. Methods: For this study, 13 kinds of metals including essential and heavy metals, i.e. A1, As, Cd, Co, Cr, Cu, Fe, Hg, Mn, Ni, Pb, Se and Zn were analyzed by a slight modification of EP A methods and the following results are obtained. Results: 1. There was no significant difference between the OD-treated groups and control group in liver, kidney, bone, brain and weight, especially no significant difference at the 5th and 10th days in weight and the amount of food intake. 2. The amount of each metal analyzed in the blood were as follows; A1: 2.3~3.07 mg/l, As: 2.90~3.66 mg/l, Cd: 0~0.001 mg/l, Co: 0~0.01 mg/l, Cr: 0.40~043 mg/l, Cu: 0.93~1.88 mg/l, Fe: 414.35~464.46 mg/l, Hg: 0.01 mg/l, Mn: 0.10~0.17 mg/l, Ni: 0.01 mg/l, Pb: 0.03~012 mg/l, Se: 0.73 mg/l, Zn: 3.41~4.13 mg/l by groups, respectively. In control and experimental group, Experimental I and other experimental II, III, IV, and V groups, there were no significant differences. 3. The amount of non-toxic metals (A1, Co, Cu, Fe, Mn, Se, Zn) were $64.1{\pm}7.71{\;}mg/l$ in the control group and 60.70~67.58 mg/l in the experimental groups I, II, III, IV and V. The amount of Toxic metals (As, Cd, Cr, Ag, Pb) were $0.68{\pm}0.21{\;}mg/l$ in the control group and 0.57 ~ 0.66mg/l in the experimental groups. The total amount of metals were 32.35 mg/l in the control group and 30.48~34.12 mg/l in the test groups I, II, III, IV and V, respectively. Conclusions: There was no significant difference of metal concentration in the blood from the OD-treated-rats compared to those of the control group even if higher dosage (1~8 times the dosage for a person) of OD was administered. This may be mainly due to a decoction treatment which contains only supernatants filtered from the herb-mass after boiling. This indicates the legal limitation for metal concentration in herbal medicine must be applied according to different treatment methods of herbal medicine.

• Journal of Pharmaceutical Investigation
• /
• v.26 no.1
• /
• pp.33-41
• /
• 1996

In order to study the effect of phenobarbital(PB) on the hepatic transport of diltiazem(DTZ), $Ca^{2+}$ channel blocker, we used isolated hepatocytes of rat which was intraperitoneally pretreated with phenobarbital sodium(75 mg/kg) for four days once a day. For the isolation of rat liver cells, a modification of the two step procedure of Seglen was used. DTZ was dissolved in incubation buffer to the final DTZ concentrations of 200, 400, 600, 800 and 1000 ng/ml in order to elucidate the uptake characteristics of DTZ by hepatocytes. Reactions were stopped at 10, 20, 30, 45, 60, 90, 120 and 300 sec. The initial velocity was determined by disappearance of diltiazem in the hepatocyte suspension. On the other hand, to determine the effect of PB on the in vitro hepatic intrinsic clearance of DTZ we obtained the metabolism rates of DTZ in the control and the PB-pretreated rat hepatocyte at various time intervals. According to pretreatment with PB, the size of hepatocyte and the amount of protein per $10^6$ cells were significantly (p<0.01) increased from $26.92{\pm}0.1364\;m$ to $35.31{\pm}1.00\;m$ and from $468{\pm}6.5\;{\mu}g/10^6$ cells to $628.8{\pm}12.1{\mu}g/10^6$ cells, respectively. In the case or hepatic uptake of diltiazem, $K_m$ was not different in the normalization by cell numbers and increased from $2.90\;{\mu}M\;to\;13.89\;{\mu}M$ in the normalization by protein amount. $V_max$ was increased regardless of normalization by protein amount and cell numbers, from $1.21\;{\mu}mole/min \;{\cdot}\;mg\;protein\;to\;3.96\;{\mu}mole/min\;{\cdot}\;mg\;protein\;and\;from\;2.38\;{\mu}mole/min\;{\cdot}\;10^6\;cells\;to\;2.83\;{\mu}mole/min\;{\cdot}\;10^6\;cells$, respectively. The in vitro hepatic intrinsic clearance of DTZ was significantly (p<0.01) increased from $0.640{\pm}0.038\;ml/mim\;{\cdot}\;10^6\;cells\;to\;2.385{\pm}0.212\;ml/min\;{\cdot}\;10^6\;cells$ due to PB-pretreatment. These results suggest that the uptake of DTZ by hepatocyte is extremely fast and PB enhances the hepatic intrinsic metabolic clearance of DTZ.

• Applied Biological Chemistry
• /
• v.35 no.2
• /
• pp.115-121
• /
• 1992

Avermectin B1(abamectin) is an very effective acaricide/insecticide. Because it is applied at low rates, the resultant residue level would be quite low and this requires highly sensitive analytical method. In this study, three analytical methods for avermectin $B1_a$, were compared in view of detectability and sensitivity. The first analytical method was an HPLC method employing the fluorescence detection of avermectin. The second analytical technique to quantitate avermectin $B1_a$, and its photodegradative delta 8,9-isomer employed trifluoroacetic anhydride and 1-methylimidazole in DMF. The new method was the modification of trifluorescence method. The average recoveries of avermectin $B1_a$ for the concentration range from 1 and 10 ng/g in whole apple fruit by fluorescence method were 90.3% and 88.2% respectively. In trifluorescence method, the recoveries of the avermectin $B1_a$ and delta 8,9-isomer were 100.7% and 94.7% in concentration from 5 ng/g and 25 ng/g. The average recoveries of 5 ng and 25 ng/g in the newly modified method were 95.0, 99.0. 96.0, 92.8% in whole apple and soil respectively.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.22 no.4
• /
• pp.108-114
• /
• 1980

A deterministic conceptual erosion model which simulates detachment, entrainment, transport and deposition of eroded soil particles by rainfall impact and flowing water is presented. Both upland and channel phases of sediment yield are incorporated into the erosion model. The algorithms for the soil erosion and sedimentation processes including land and crop management effects are taken from the literature and then solved using a digital computer. The erosion model is used in conjunction with the modified Kentucky Watershed Model which simulates the hydrologic characteristics from watershed data. The two models are linked together by using the appropriate computer code. Calibrations for both the watershed and erosion model parameters are made by comparing the simulated results with actual field measurements in the Four Mile Creek watershed near Traer, Iowa using 1976 and 1977 water year data. Two water years, 1970 and 1978 are used as test years for model verification. There is good agreement between the mean daily simulated and recorded streamflow and between the simulated and recorded suspended sediment load except few partial differences. The following conclusions were drawn from the results after testing the watershed and erosion model. 1. The watershed and erosion model is a deterministic lumped parameter model, and is capable of simulating the daily mean streamflow and suspended sediment load within a 20 percent error, when the correct watershed and erosion parameters are supplied. 2. It is found that soil erosion is sensitive to errors in simulation of occurrence and intensity of precipitation and of overland flow. Therefore, representative precipitation data and a watershed model which provides an accurate simulation of soil moisture and resulting overland flow are essential for the accurate simulation of soil erosion and subsequent sediment transport prediction. 3. Erroneous prediction of snowmelt in terms of time and magnitute in conjunction with The frozen ground could be the reason for the poor simulation of streamflow as well as sediment yield in the snowmelt period. More elaborate and accurate snowmelt submodels will greatly improve accuracy. 4. Poor simulation results can be attributed to deficiencies in erosion model and to errors in the observed data such as the recorded daily streamflow and the sediment concentration. 5. Crop management and tillage operations are two major factors that have a great effect on soil erosion simulation. The erosion model attempts to evaluate the impact of crop management and tillage effects on sediment production. These effects on sediment yield appear to be somewhat equivalent to the effect of overland flow. 6. Application and testing of the watershed and erosion model on watersheds in a variety of regions with different soils and meteorological characteristics may be recommended to verify its general applicability and to detact the deficiencies of the model. Futhermore, by further modification and expansion with additional data, the watershed and erosion model developed through this study can be used as a planning tool for watershed management and for solving agricultural non-point pollution problems.

• Microbiology and Biotechnology Letters
• /
• v.38 no.4
• /
• pp.349-361
• /
• 2010

In this review, the current knowledge of the carbon metabolism and global carbon regulation in Corynebacterium glutamicum are summarized. C. gluamicum has phosphotransferase system (PTS) for the utilization of sucrose, glucose, and fructose. C. glutamicum does not show any preference for glucose when various sugars or organic acids are present with glucose, and thus cometabolizes glucose with other sugars or organic acids. The molecular mechanism of global carbon regulation such as carbon catabolite repression (CCR) in C. glutamicum is quite different to that in Gram-negative or low-GC Gram-positive bacteria. GlxR (glyoxylate bypass regulator) in C. glutamicum is the cyclic AMP receptor protein (CRP) homologue of E. coli. GlxR has been reported to regulate genes involved in not only glyoxylate bypass, but also central carbon metabolism and CCR including glycolysis, gluconeogenesis, and tricarboxylic acid (TCA) cycle. Therefore, GlxR has been suggested as a global transcriptional regulator for the regulation of diverse physiological processes as well as carbon metabolism. Adenylate cyclase of C. glutamicum is a membrane protein belonging to class III adenylate cyclases, thus it could possibly be a sensor for some external signal, thereby modulating cAMP level in response to environmental stimuli. In addition to GlxR, three additional transcriptional regulators like RamB, RamA, and SugR are also involved in regulating the expression of many genes of carbon metabolism. Finally, recent approaches for constructing new pathways for the utilization of new carbon sources, and strategies for enhancing amino acid production through genetic modification of carbon metabolism or regulatory network are described.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.7
• /
• pp.752-756
• /
• 2006

The independent anoxic reactor was introduced in biological aerated filters as the regulation of water quality requirement, especially total nitrogen, had been strengthened. The process studied in this work was upflow $Biobead^{(R)}$ process which was used commercial invented for removal of organic materials and nitrification. For the purpose of evaluating the independent anoxic reactor, PCR-DGGE, of the molecular biological methods, was performed. Two types of nitrite reductase genes were selected. One is nirS represented cytocrome $cd_1$ nitrite reductase gene and the other is nirK represented Cu-containing nitrite reductase gene. Denitrifier community in the independent anoxic reactor was analyzed with PCR-DGGE using these two denitrifying functional genes. As the result of the PCR, only nirS gene was detected between nirS and nirK. With the result of the DGGE, specific bands became strong, as the operating days were longer, nitrate loading rate was increased. otherwise those of the initial activated sludge showed various bands. In the consequence of the sequence of DGGE bands, various denitrifiers were sequenced in the initial activated sludge, while specific denitrifiers like alcaligenes faecalis were predominant in the anoxic reactor. Consequently, introduction of the independent anoxic reactor made it possible to achieve 96% denitrification efficiency, and was proper for the modification of BAF process.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.10
• /
• pp.1065-1073
• /
• 2006

The unturned carbon in fly ash, recently occurred in the coal-fired Yong Hung power station, caused some problems in ash utilization and boiler efficiency. This paper describes the analysis of unburned carbon and six coals, some tests performed at Yong Hung Boiler, and the results of combustion modification for the reduction of unburned carbon in fly ash. From the physical and chemical analysis of unburned carbon in fly ash, most particles were turned out to be hollow cenosphere and agglomerated soot particles. The sooting potential from six coals used in the plant were investigated with CPD(Chemical Percolation Devolatilization) model. The results showed that the higher potential was presented to Peabody, Arthur, Shenhua coals rather than other coals. It was necessary to measure the coal flow rates at each coal feeding pipe for four burner levels since they affect the extent of mixing of soot with oxidant, in turn, the oxidation rate of soot particles. The unbalance in coal flow rate was found in several coal pipes. We successfully reduced unturned carbon in ash by increasing the excess air and changing the SOFA's yaw angle.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.6
• /
• pp.373-381
• /
• 2012

An automatic flow and water quality monitoring system was applied to estimate pollutant loads to an urban stream during storm events in DTV (Daeduk Techno Valley), Daejeon, Korea. The monitoring system consists of rainfall gage, ultrasonic water level meter, water quality sensors for DO, temperature, pH, conductivity, turbidity and automatic water sampler for further laboratory analysis. All data are transmitted through on-line system and the monitoring system is designed to be controlled manually in the field and remotely from laboratory computer. Flow rates were verified with field measurements during storm events and showed good agreements. Automatic sampler was used to collect real time samples and analyzed for BOD, COD, TN, TP, SS and other pollutant concentrations in the laboratory. SWMM (Storm Water Management Model) urban watershed model was applied and calibrated using the observed flow and water quality data for the study area. While flow modeling results showed good agreement for all events, water quality modeling results showed variable levels of agreement. These results indicate that current options in the SWMM model to predict pollutant build up and wash-off effects are not sufficient to satisfy modeling of all the rainfall events under study and thus need further modification. This study showed the automatic monitoring system can be used to provide data to assist further refinement of modeling accuracy. This automatic stormwater monitoring and modeling system can be used to develop basin scale water quality management strategies of urban streams in storm events.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.35 no.4
• /
• pp.386-394
• /
• 2002

Carrying capacity model focused on interactions between the filter-feeder growth and their environments is presented, and differences among existing various carrying capacity models are reviewed. For carrying capacity modeling of shellfish system, we constructed a new numerical model coupled oyster growth model with an ecosystem model (EUTRP2). Physical and biological processes such as water transport and mixing, primary production, feeding and growth of the cultivated oyster, Crassostrea gigas and benthic-pelagic exchange were included in the model, Simulated results for validation showed that the more phytoplankton biomass decreased, the more oyster meat weight and nutrients increased, suggesting a powerful tool for reasonable management of shellfish aquaculture. The model was sensitive to parameters controlling the primary production. Among the ecosystem compartments, the oyster growth is highly influenced by small changes in the physiological parameters of phytoplankton and oyster. This sensitivity analysis indicated the importance of experimental data on biological parameters for calibration of the model.