• Journal of the Korea Fashion and Costume Design Association
• /
• v.13 no.4
• /
• pp.167-177
• /
• 2011

As today the world has been globalized, each country and race has been trying its best to preserve and develop its own unique culture to have its identity. Same exertion has been added in the areas of fashion and textile such as developing traditional textile or fabrics and applying them to the materials of modem fashion. The Korean traditional gold foil is one of invaluable cultural heritages, and another means to elevate the wearer's social status, and its beauty and artistic quality is very excellent. So, in order to preserve and develop of the Korean traditional gold foil, the exertion of developing the gold foil into multi-purpose modem fashion material which is endurable and practical by using the image of Korean traditional gold foil should be done. The purposes of this study are to preserve Korean traditional gold foil, to develop Korean textile and fashion industry by utilizing Korean traditional gold foil images in modem fashion. The results are as follows: textile designs applied plant motives of Korean traditional gold foil were carried out, modem fashion materials of Korean traditional gold foil image were developed by Jacquard weave. They were to certify that those were registered on the register of the Korean of design registrations from commissioner the Korean Intellectual Property Office, and developed fabrics of Korean gold foil image were examined the utility for modern fashion materials through using them in the modem wearing, interior goods and fashion items.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.1 s.343
• /
• pp.121-126
• /
• 2006

This paper report on the design and implementation of a 9.6kbps DSSS CDMA modem for a medium speed wireless link. The proposed modem provides a general purpose I/O interface with a microprocessor. The I/O interface consists of 8-bit data bus, chip enable, read/write, and interrupt pins. In transmit block, the 8-bit data delivered from the I/O interface buffer is converted to 9.6kbps serial data, which are spreaded into 76.8kcps with 8-bit PN code generated inside the modem by direct sequence method. An 8-bit training sequence is preceded in the data frame for data synchronization in receiver. In receiver block the PN code is synchronized from the received data spreaded to 76.8kcps and find the data timing from the 8-bit training sequence. We have used the Early-and-Late integration method. The modem has been implemented and verified using a Xilix FPGA board and has been fabricated as an ASIC CHIP through Hynir $0.25{\mu}m$ CMOS. The multiple accessing method is DSSS CDMA.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.11 no.1
• /
• pp.169-179
• /
• 2009

In order to preserve the Korean traditional gold foil, to develop as Korean traditional textile art by utilizing in modem fashion for textile industry, and to examine utility of the material which can be used in the modem wearing, interior goods and fashion terms, Textiles Applied Korean Traditional Gold Foil were developed. The results are as follows: First, important factors of the gold foil image should be extracted as materials quality, color and pattern, and modem and practical qualities should be proceeded when developing the image of the gold foil into modem quality material. Second, since gloss of fabric developed by a traditional method is somewhat strong, uniformity being a little bit low for hand-made manufacturing, and practical quality is low for high cost, deletion of the gold foil, etc. So it hasn't been appropriate for studying modem fashion material. Third, Jacquard weave has been examined as the most appropriate method in order to present the gold foil image among a number of textile manufacturing techniques Fourth, considering factors deciding the image of the gold foil and a sense of beauty of modem society, gloss of the foil has been lessened by expressing pattern to lower traditional quality and primary color. Fifth, pattern motives of developed materials have been extracted tram traditional gold foil patterns, and materials have been chosen considering of concepts and motives, and dragon pattern, crane pattern and bat pattern, Sixth, wearing, pin-up works, bed linen, fabrics for chairs, ties, bags, shoes, umbrellas, etc. are produced with the developed materials, and practical use and modern quality have been examined. The result is very satisfactory.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.9A
• /
• pp.991-997
• /
• 2004

In this paper, we propose the architecture of modem receiver to fabricate HomePNA 2.0 chip. HomePNA suffers from inferior channel because of bridge tap, the effect of amateur HAM band and so on. To transfer data over such channel, HomePNA 2.0 uses training sequence to equalize channel and uses FD-QAM optionally as modulation method. So modem receiver demodulate QAM based signal and needs optimum architecture that fully uses these transmission feature. As a result of research, we define 2 mode function of modem receiver depending on TX/RX state. In this paper, particularly, we show the algorithm of equalizer, carrier phase recovery and frame synchromzationblock and propose architecture that improve the performance of channel equalization and is stable in operation. In the end, we estimate the performance of proposed HomePNA2.0 modem receiver over HomePNA TEST LOOP using SPW program.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.12
• /
• pp.2642-2648
• /
• 2010

The design of coupling and rectifying circuits for the maritime VHF digital modem is investigated in this paper. To monitor the transmitting power of the modem, a directional coupler which is used to extract a small fraction of the transmitter signal power, and a rectifying circuit which make DC voltage proportional to the coupled rf power are designed and fabricated. The parallel-coupled line coupler with directivity of above 25 dB at 160 MHz bands is designed and it is shown that the output voltage of the rectifying circuit is linearly changing from 0.85 V to 1.6 V when the transmitting power of the modem is varying from 1 W to 25 W. The proposed coupler and rectifying circuits are expected to be suitable for maritime VHF digital modem.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.3
• /
• pp.275-281
• /
• 2014

Recently, the need for various underwater application systems targeting efficient resource exploration and aquatic ecosystem monitoring is rapidly increasing in littoral sea and inland waters. In this paper, we focus on the research and development of digital module of acoustic micro modem which can be used for underwater mobile communication systems and underwater sensor network systems. Specifically, a digital module of acoustic modem embedding digital signal processor is designed and implemented. On top of the developed hardware platform, physical layer frame generation and recovery and channel coding algorithms are mounted and tested in a water tank and a pond to verify its functionality and performance. According to experimental results, less than 1 percent of total computational power is consumed in the processing of frame control and convolutional code with the data rate of 1 kbps. Thus, the performance of micro modem could be improved by loading efficient baseband algorithms into the processor while maintaining the implemented hardware.

• Proceedings of the IEEK Conference
• /
• 2001.06e
• /
• pp.43-46
• /
• 2001

This paper has been studied a implementation Home Automation by PLM and Telephone system. The PLM is composed of FSK IC-chip and the circuit for the power line communication. In this paper load control was made with PIC16F84A and its communication speed was 1200 baud rates.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2004.11a
• /
• pp.248-248
• /
• 2004

• The KIPS Transactions:PartC
• /
• v.11C no.1
• /
• pp.141-148
• /
• 2004

Recently, the demand of broadband communications such as high-speed internet, HDTV, 3D-HDTV and ATM backbone network has been increased drastically. For transmitting the broad-bandwidth data using wireless network, it is needed to use ka-band frequency. However, the use of this ka-band frequency is seriously affected to the received data performance by rain fading and atmospheric propagation loss at the Ka-band satellite communication link. So, we need adaptive MODEM to endure the degraded performance by channel environment. In this paper, we will present the structure and design of the 155Mbps adaptive Modem adaptively compensated against channel environment. In order to compensate the rain attenuation over the ka-band wireless channel link, the adaptive coding schemes with variable coding rates and the multiple modulation schemes such as trellis coded 8-PSK, QPSK, and BPSK are adopted. And the blind demodulation scheme is proposed to demodulate without Information of modulation mode at the multi-mode demodulator, and the fast phase ambiguity resolving scheme is proposed. The design and simulation results of adaptive Modem by SPW model are provided. This 155Mbps adaptive MODEM was designed and implemented by single ASIC chip with the $0.25\mu{m}$ CMOS standard cell technology and 950 thousand gates.

• Journal of IKEEE
• /
• v.16 no.1
• /
• pp.56-61
• /
• 2012

In this paper, a digital modem for the medical implant communication system will operate in 402~405 Mhz wide-band in international standardization frequency was designed and implemented. The ${\pi}$/4-D8PSSK modem, which is not only power effective with a good low-powered characteristics but also band-width effective, can overcome the shortcoming of PSK. The proposed digital modem was verified through the wave comparison based on the result of Matlab simulation and the wave from the measured one using Chipscope, and implemented with FPGA.