• 환경영향평가
• /
• 제18권3호
• /
• pp.143-150
• /
• 2009

The present study investigates the effects of the flight paths of military aircraft on noise map and its WECPNL(Weighted Equivalent Continuous Perceived Noise Level) distribution. Aircraft noise modeling and simulation have been performed on a Korean military air base by means of INM(Integrated Noise Model) with the input data of airfield location, aircraft specifications, flight paths and aircraft's operation schedules. The result of noise modelling has been verified in comparison with the result of measured noise level. The flight path of military aircraft, as the key parameter of the present study, was modeled by combining takeoff, overfly, approach and touch-and-go modes. The present INM simulations have been conducted for various flight path cases with different takeoff, approach modes and overfly modes. The simulation results showed that the change of flight path can remarkably affect the noise influence region and the WECPNL distribution around the airfield.

• 한국항공우주학회지
• /
• 제40권3호
• /
• pp.193-200
• /
• 2012

스키점프 공력 특성에 관한 자료 획득을 목적으로 전산 수치 해석을 수행하였다. 한국인의 체형을 고려한 인체 모델링 기법을 적용하였으며 해석 결과의 검증을 위해 기존 풍동실험 연구 결과를 비교 분석하였다. 다양한 비행 조건에서 공력 계수를 분석하여 최대 양항비를 나타내는 비행 자세를 발견하였다. 본 연구가 대한민국 스키점프 선수들의 비행 자세 교정과 국내 스포츠 과학 발전에 기여할 수 있을 것으로 기대한다.

• 전자공학회논문지A
• /
• 제33A권4호
• /
• pp.11-17
• /
• 1996

In the case of redundancy control performed by a netowrk management system, it can not be ignored some delay of control time and break of control by failure of the system. This paper proposed a new method to improve the performacne of a redundancy control system interfaced to the network management system. At first, it produced the modelling of the total system and analyzed the functional relation of reliability and failure rate for a transmission system having an one-to-one active redundancy structure controlled by itself. After describing the loss rate of transmission data and the time required for the redundancy control process of the network management system when a failure is occurred, it proposed the new redundancy method of complex system control mode as an effective redundancy control method to improve reliability of a redundancy control system. Finally, it proved the effect by comparing the new result to the previous result.

• 제어로봇시스템학회논문지
• /
• 제11권9호
• /
• pp.768-773
• /
• 2005

A new approach for human foot modelling and last design based on the cross sectional method is presented in this paper. The proposed last design method utilizes the dynamic trimmed parametric patches for the foot 3D data and last 3D data. The cross section a surface of 3D foot for the 3D last, design modeling of free form geometric last shapes. The proposed last design scheme wraps the 3D last data surrounding the measured 3D foot data with the effect of deforming the last design rule The last design rule of the FFD is constructed on the FFD lattice based on foot-last shape analysis. In addition, the control points of FFD lattice are constructed with cross sectional data interpolation methods from the a finite set of 3D foot data. The deformed 3D last result obtained from the proposed FFD is saved as a 3D dxf foot data. The experimental results demonstrate that the last designed with the proposed scheme has good performance.

• 한국항해항만학회지
• /
• 제35권9호
• /
• pp.735-740
• /
• 2011

It is necessary to develop the one stop system in order to protect our marine environment rapidly from oil spill accident. The purpose of this study is to develop real time database for oil spill prediction modeling and implement real time prediction modelling with ESI and server-client GIS based user interface. The existing oil spill prediction model cannot provide one stop information system for public and government who should protect sea from oil spill accident. The development of multi user based information system permits integrated handling of real time meteorological data from external ftp. A server-client GIS based model is integrated on the basis of real time database and ESI map to provide the result of the oil spill prediction model. End users can access through the client interface and request analysis such as oil spill prediction and GIS functions on the network as their own purpose.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2014년도 제49회 KOSCO SYMPOSIUM 초록집
• /
• pp.37-40
• /
• 2014

Capturing the carbon dioxide emitted from coal-fired power plants will be necessary if targeted reduction in carbon emissions is to be achieved. Modelling and simulation are the base for optimal operation and control in thermal power plant and also play an important role in energy savings. This study aims to analyze the performance of supercritical coal fired power plant through steady and dynamic simulation using a commercial software gCCS. A whole power plant has been modeled and validated with design data of 500 MWe power plant, base and part load operations of the plant were also evaluated, consequently it had been proven that the simulated result had a good agreement with actual operating data. In addition, the effect of co-firng on the plant efficiency and flue gases were investigated using gCCS simulator.

• 한국강구조학회 논문집
• /
• 제12권1호통권44호
• /
• pp.9-16
• /
• 2000

본 연구는 중심 압축을 받는 각형 CFT 단주의 하중-변형도 관계를 추정하기 위한 재료의 응력도-변형도 관계 모델화에 관한 것이다. 수정된 모델은 미일공동연구 결과식 형태를 기본으로 하여 본 연구자가 수행했던 실험결과로 수정된 것이다. 궁극적인 목적은 콘크리트와 강관의 강도 변화에 따른 거동 특성을 평가하기 위한 기초 자료의 제공에 있다.

• Smart Structures and Systems
• /
• 제21권2호
• /
• pp.187-194
• /
• 2018

This paper focuses on the $H_{\infty}$ filter design problem for offshore steel jacket platforms. Its objective is to design a full-order state observer for offshore platforms in presence of unknown disturbances. To make the method more practical, it is assumed that the measured variables are available at discrete-time instants with time-varying sampling time intervals. By modelling the sampling intervals as a bounded time-varying delay, the estimation error system is expressed as a time-delay system. As a result, the addressed problem can be transformed to the problem of stability of dynamic error between the system and the state estimator. Then, based on the Lyapunov-Krasovskii Functional (LKF), a stability criterion is obtained in the form of Linear Matrix Inequalities (LMIs). According to the stability criterion, a sufficient condition on designing the state estimator gain is obtained. In the end, the proposed method is applied to an offshore platform to show its effectiveness.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제17권10호
• /
• pp.2822-2843
• /
• 2023

All aspects of human life have become increasingly dependent on data in the last few decades. The development of several applications causes an enormous issue on data volume in current years. This information must be safeguarded and kept in safe locations. Massive volumes of data have been safely stored with cloud computing. This technology is developing rapidly because of its immense potentials. As a result, protecting data and the procedures to be handled from attackers has become a top priority in order to maintain its integrity, confidentiality, protection, and privacy. Therefore, it is important to implement the appropriate security measures in order to prevent security breaches and vulnerabilities. An improved version of Modular Encryption Standard (IMES) based on layered modelling of safety mechanisms is the major focus of this paper's research work. Key generation in IMES is done using a logistic map, which estimates the values of the input data. The performance analysis demonstrates that proposed work performs better than commonly used algorithms against cloud security in terms of higher performance and additional qualitative security features. The results prove that the proposed IMES has 0.015s of processing time, where existing models have 0.017s to 0.022s of processing time for a file size of 256KB.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 D
• /
• pp.2167-2168
• /
• 2006

Mobilecomputer of offers more fundamental role than role assistance enemy of modem technology equipment and new Information Technology can reconsider, and reconstruct creatively accuracy of physiological concept. That military register symptoms are developed of disease, before far before rehalibitation, of for possibility that can intervene in process that motive change of military register symptoms after rehalibitation. But, that many parameters become analysis target and mathematical settlement and equalization system of noted data of that is huge, same time collection of all datas can lift difficulty etc.. These main weakness puts in structural relation between elements that compose system. Therefore, dynamics research that time urea of systematic adjustment has selected method code Tuesday nerve dynamics enemy who groping of approach that become analysis point is proper and do with recycling bioelectricity signal. Nature model of do living body signal digital analysis chapter as research result could be developed and scientific foundation groping could apply HSS (Hardware-software system) by rehalibitation purpose. Special quality that isdone radish form Tuesday of bioelectricity signal formation furthermore studied, and by the result, fundamental process of bodysignal in do structure circuit form of analog - digital water supply height modelling do can.