• Journal of Power Electronics
• /
• v.19 no.5
• /
• pp.1224-1234
• /
• 2019

Hybrid rotor position estimation methods that integrate a fundamental model and high frequency (HF) signal injection are widely used for the wide speed-range sensorless control of interior permanent-magnet synchronous machines (IPMSMs). However, the direct transition of two different schemes may lead to system fluctuations or system instability since two estimated rotor positions based on two different schemes are always unequal due to the effects of parameter variations, system delays and inverter nonlinearities. In order to avoid these problems, a seamless transition strategy to define and construct a virtual q-axis inductance is proposed in this paper. With the proposed seamless transition strategy, an estimated rotor position based on a fundamental model is forced to track that based on HF signal injection before the transition by adjusting the constructed virtual q-axis inductance. Meanwhile, considering that the virtual q-axis inductance changes with rotor position estimation errors, a new observer with a two-phase phase-locked loop (TP-PLL) is developed to accurately obtain the virtual q-axis inductance online. Furthermore, IPMSM sensorless control with maximum torque per ampere (MTPA) operations can be tracked automatically by selecting the proper virtual q-axis inductance. Finally, experimental results obtained from an IPMSM demonstrate the feasibility of the proposed seamless transition strategy.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.9B
• /
• pp.1742-1754
• /
• 1999

In this paper, we propose a rate control scheme, using histogram based rate-distortion (R-D) estimation, which produces a consistent picture quality between consecutive frames. The histogram based R-D estimation used in our rate control scheme offers a closed-form mathematical model that enable us to predict the bits and the distortion generated from an encoded frame at a given quantization parameter (QP) and vice versa. The most attractive feature of the R-D estimation is low complexity of computing the R-D data because its major operation is just to obtain a histogram or weighted histogram of DCT coefficients from an input picture. Furthermore, it is accurate enough to be applied to the practical video coding. Therefore, the proposed rate control scheme using this R-D estimation model is appropriate for the applications requiring low delay and low complexity, and controls the output bit-rate ad quality accurately. Our rate control scheme ensures that the video buffer do not underflow and overflow by satisfying the buffer constraint and, additionally, prevents quality difference between consecutive frames from exceeding certain level by adopting the distortion constraint. In addition, a consistent considering the maximum tolerance BER of the voice service. Also in Rician fading channel of K=6 and K=10, considering CLP=$10^{-3}$ as a criterion, it is observed that the performance improment of about 3.5 dB and 1.5 dB is obtained, respectively, in terms of $E_b$/$N_o$ by employing the concatenated FEC code with pilot symbols.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.8
• /
• pp.2010-2024
• /
• 1998

In video coding, it is important to improve the average picture quality as well as to maintain cosistent picture quality between consecutive pictures. In this paper, we propose a distortion-rate estimation method for MPEG-2 video and a forward rate control method, using the proposed estimation result, to be able to obtain the improved and consistent picture quality of CBR (Constant Bit Rate) encoded MPEG-2 video. The proposed distortion-rate estimation enable us to predict the distortion and the bits generated from an encoded picture at a given quantization step size and vice versa. The most attactive features of proposed distortion-rate estimation are its accuracy and low computational complexity enough to be applied to the practical video coding. In addition, the proposed rate control first determined a quantization parameter per frame by following procedure: distortion-rate estimation, target bit allocation, distortion constraint and VBV(Video Buffer Verification) constraint. And then this quantization parameter is applied to the encoding so that improved and consisten picture quality can be obtained. Furthermore the proposed rate control method can solve the error propagation problem caused by scene change or anchor picture degradation by using the B-picture skipping and the guarantee of the minimum bit allocation for the anchor picture. Experimental results, comparing the proposed forward rate control method with TM5 method, show that the proposed method makes more improed and consistent picture quality than TM5.

• Journal of Wetlands Research
• /
• v.19 no.4
• /
• pp.423-432
• /
• 2017

This study used SSARR model to predict the flood hydrograph for the Miho stream in the Geum river basin. First, we performed the sensitivity analysis on the parameters of SSARR model to know the characteristics of the parameters and set the range. For the parameter calibration, optimization methods such as genetic algorithm, pattern search and SCE-UA were used. WSSR and SSR were applied as objective functions, and the results of optimization method and objective function were compared and analyzed. As a result of this study, flood prediction was most accurate when using pattern search as an optimization method and WSSR as an objective function. If the parameters are optimized based on the results of this study, it can be helpful for decision making such as flood prediction and flood warning.

• Speech Sciences
• /
• v.5 no.1
• /
• pp.7-21
• /
• 1999

This paper proposes an improved training procedure in speech recognition based on the continuous density of the Hidden Markov Model (CDHMM). Of the three parameters (initial state distribution probability, state transition probability, output probability density function (p.d.f.) of state) governing the CDHMM model, we focus on the third parameter and propose an efficient algorithm that determines the p.d.f. of each state. It is known that the resulting CDHMM model converges to a local maximum point of parameter estimation via the iterative Expectation Maximization procedure. Specifically, we propose two independent algorithms that can be embedded in the segmental K -means training procedure by replacing relevant key steps; the adaptation of the number of mixture Gaussian p.d.f. and the initialization using the CDHMM parameters previously estimated. The proposed adaptation algorithm searches for the optimal number of mixture Gaussian humps to ensure that the p.d.f. is consistently re-estimated, enabling the model to converge toward the global maximum point. By applying an appropriate threshold value, which measures the amount of collective changes of weighted variances, the optimized number of mixture Gaussian branch is determined. The initialization algorithm essentially exploits the CDHMM parameters previously estimated and uses them as the basis for the current initial segmentation subroutine. It captures the trend of previous training history whereas the uniform segmentation decimates it. The recognition performance of the proposed adaptation procedures along with the suggested initialization is verified to be always better than that of existing training procedure using fixed number of mixture Gaussian p.d.f.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.7 no.2
• /
• pp.227-243
• /
• 2015

In this paper, the effects of nonlinear soft clay on dynamic embedment of offshore pipeline were investigated. Seabed embedment by pipe-soil interactions has impacts on the structural boundary conditions for various subsea structures such as pipeline, riser, pile, and many other systems. A number of studies have been performed to estimate real soil behavior, but their estimation of seabed embedment has not been fully identified and there are still many uncertainties. In this regards, comparison of embedment between field survey and existing empirical models has been performed to identify uncertainties and investigate the effect of nonlinear soil parameter on dynamic embedment. From the comparison, it is found that the dynamic embedment with installation effects based on nonlinear soil model have an influence on seabed embedment. Therefore, the pipe embedment under dynamic condition by nonlinear parameters of soil models was investigated by Dynamic Embedment Factor (DEF) concept, which is defined as the ratio of the dynamic and static embedment of pipeline, in order to overcome the gap between field embedment and currently used empirical and numerical formula. Although DEF through various researches is suggested, its range is too wide and it does not consider dynamic laying effect. It is difficult to find critical parameters that are affecting to the embedment result. Therefore, the study on dynamic embedment factor by soft clay parameters of nonlinear soil model was conducted and the sensitivity analyses about parameters of nonlinear soil model were performed as well. The tendency on dynamic embedment factor was found by conducting numerical analyses using OrcaFlex software. It is found that DEF was influenced by shear strength gradient than other factors. The obtained results will be useful to understand the pipe embedment on soft clay seabed for applying offshore pipeline designs such as on-bottom stability and free span analyses.

• Water Engineering Research
• /
• v.1 no.2
• /
• pp.147-158
• /
• 2000

In this study, we characterized the seasonal variation of rainrate fields in the Han river basin using the WGR multi-dimensional precipitation model (Waymire, Gupta, and Rodriguez-Iturbe, 1984) by estimating and comparing the parameters derived for each month and for the plain area, the mountain area and overall basin, respectively. The first-and second-order statistics derived from observed point gauge data were used to estimate the model parameters based on the Davidon-Fletcher-Powell algorithm of optimization. As a result of the study, we can find that the higher rainfall amount during summer is mainly due to the arrival rate of rain bands, mean number of cells per cluster potential center, and raincell intensity. However, other parameters controlling the mean number of rain cells per cluster, the cellular birth rate, and the mean cell age are found invariant to the rainfall amounts. In the application to the downstream plain area and upstream mountain area of the Han river basin, we found that the number of storms in the mountain area was estimated a little higher than that in the plain area, but the cell intensity in the mountain area a little lower than that in the plain area. Thus, in the mountain area more frequent but less intense storms can be expected due to the orographic effect, but the total amount of rainfall in a given period seems to remain the same.

• Journal of Biomedical Engineering Research
• /
• v.15 no.4
• /
• pp.481-488
• /
• 1994

In this paper a study of neuro-pathway estimation based on visual and somatosensory evoked potential is given. The evoked potentials which are caused by visual and somatosensory stimulation are detected by an average method. The forward problem that is estimating a scalp potential from a given electrical source in the brain is solved by using a triple concentric spherical shell model of the head and a single current dipole model of the neuron activity. The inverse problem which calculates a source position is solved by a least square fit between the model predicted potential and a given evoked potential measurement. The similarities between estimated sensory neuro-pathways and physiological brain function regions are verified.

• Journal of Korea Water Resources Association
• /
• v.50 no.11
• /
• pp.745-758
• /
• 2017

The copula-based models have been successfully applied to hydrological modeling including drought frequency analysis and time series modeling. However, uncertainty estimation associated with the parameters of these model is not often properly addressed. In these context, the main purposes of this study are to develop the Bayesian inference scheme for bivariate copula functions. The main applications considered are two-fold: First, this study developed and tested an approach to copula model parameter estimation within a Bayesian framework for drought frequency analysis. The proposed modeling scheme was shown to correctly estimate model parameters and detect the underlying dependence structure of the assumed copula functions in the synthetic dataset. The model was then used to estimate the joint return period of the recent 2013~2015 drought events in the Han River watershed. The joint return period of the drought duration and drought severity was above 100 years for many of stations. The results obtained in the validation process showed that the proposed model could effectively reproduce the underlying distribution of observed extreme rainfalls as well as explicitly account for parameter uncertainty in the bivariate drought frequency analysis.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.577-580
• /
• 2010

This paper proposes a new algorithm for flicker reduction. Flicker is defined as unwanted luminance fluctuation in the image sequences. As the flicker degrades the performance of motion estimation or segmentation of the objects, it should be corrected before further processing. In this paper, we model the flicker effects as a linear system with gain and offset parameter and propose the new algorithm for flicker reduction. The proposed algorithm considers gain and offset parameter separately, and stabilizes the luminance fluctuation based on these parameters. We show the performance of the proposed method by testing on the sequence with artificially added luminance flicker and real sequence with object motion.