• Survey Research
• /
• v.11 no.2
• /
• pp.1-28
• /
• 2010

This paper reports the results of the 2009 Internet volunteer panel version of the social survey conducted by Statistics Korea (Korea National Statistical Office). Authors identify socio-psychological characteristics of Internet survey volunteers and present quantitative evaluation of the propensity adjustment weighting method intended to remove Internet sample bias. The nine criteria used for propensity adjustment were regions, urban/rural, gender, age, education, consumer satisfaction, views on income distribution, newspaper access and Internet news access. Propensity adjustment weighting based on the logit model and rim weights were applied to the online survey of 2,903 respondents using the face-to-face area sample data of 37,049 respondents as reference. A total of 106 items were used for evaluating the propensity adjustment weighting methods. The results showed that in 80% of survey items the propensity adjustment weighting yielded better estimates compared to simple demographic weighting. This suggests that Internet surveys by volunteer panels are useful for conducting the general social study in Korea. The reference survey data for this study contains several items on social-psychological behaviors and attitudes, is large in size and obtained by probability sampling. Thus it may be utilized in propensity adjustment of other Internet surveys.

• Journal of the Korea Concrete Institute
• /
• v.26 no.3
• /
• pp.361-367
• /
• 2014

This paper investigates the punching shear strength of lightweight aggregate concrete (LWAC) slabs through a series of experimental study. Five full scale slabs were constructed using normal concrete and four different types of LWAC. Each lightweight aggregate (LWA) used in this study had different sources (clay, shale, or slate) and shapes (crushed or spherical shape). Based on the test results, the effect of the lightweight aggregates (LWA) on the punching shear behavior was investigated. From the test results, it was found that the punching shear failure surface of LWAC slab with spherical shape coarse aggregate was less inclined than that with crushed shape coarse aggregate, which resulted in an increase of the area of the shear failure surface. As a result, it leads to the increased punching shear strength of the slab. On the other hand, the failure surfaces of LWAC slab with crushed shape coarse aggregate and normal coarse aggregate were inclined similarly. Finally, the test results of this study were compared with the punching shear strength obtained from current design models, such as ACI and CEB-FIP, to examine the validation of current design model to predict the punching shear strength of the LWAC slab.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.3
• /
• pp.442-448
• /
• 2015

The aim of this study was to investigate the effects of guar gum on the rheological behaviors, sensory attributes, and consumer acceptability of soft tofu stew sauce. Five different soft tofu stew sauces were commercially manufactured with various levels of guar gum (0.0, 0.1, 0.2, 0.4, and 0.5%). Twelve sensory attributes of the stew sauces were identified by nine trained descriptive panelists, whereas hedonic levels of the stew sauces were assessed by a group of 51 consumers. Steady flow of the stew sauces were measured by a rheometer. Significant differences were observed in terms of sensory saltiness and viscosity among the products. For the consumer test, 0.1% guar gum-added product was most liked by consumers. Partial least square regression showed sensory shellfish, green onion, and shrimp flavors to be key factors affecting overall acceptability for the stew sauces. For rheological behaviors, 0.0, 0.1, and 0.2% guar gum-added products showed newtonian behaviors ($R^2$=0.99 by power law model), whereas 0.4 and 0.5% products followed pseudoplastic behaviors ($R^2$=0.99 by power law model). Based on the established equivalence table using rheological and consumer data, smaller than 0.0114 ($Pa{\cdot}s$) of the apparent viscosity should be necessary to guarantee 'slightly like' category in a consumer hedonic test. It seems that addition of guar gum not only influenced rheological properties but overall acceptability for the stew sauces.

• The korean journal of orthodontics
• /
• v.41 no.4
• /
• pp.255-267
• /
• 2011

Objective: The purpose of this study was to confirm the reliability of a cone beam computed tomography (CBCT)-generated panoramic view based on a CBCT 3D image and to find the most helpful 2D panoramic image compared with CBCT 3D image when examining the mesiodistal tooth axis. Methods: A test model was constructed according to cephalometric norms. The test model was repeatedly repositioned for CBCT and panoramic radiographic imaging. Panoramic radiographs were acquired at each of the following 3 occlusal plane positions: $-5^{\circ}$, $0^{\circ}$, and $+5^{\circ}$. Measurements of mesiodistal tooth axis in CBCT 3D image, CBCT-generated panoramic view, and panoramic radiographs were compared. Results: Compared with the CBCT-generated panoramic view, CBCT 3D image showed significant difference in the mesiodistal tooth axis in the premolars and no significant difference in the mesiodistal tooth axis in the incisors and canines. Mesiodistal tooth axis on the CBCT-generated panoramic view was significantly different from that on panoramic radiographs. Conclusions: CBCT-generated panoramic view can be a useful tool for evaluating mesiodistal tooth axis.

• Journal of the Ergonomics Society of Korea
• /
• v.32 no.1
• /
• pp.77-85
• /
• 2013

Objective: The aim of this study sets factors from previous research known to impact transfer effects as the independent variables, and examines their relationship with the dependent variables, near transfer effects and far transfer effects. Background: Transfer of Training refers to the application of what learners acquire knowledge and skills in training programs to their job. The ultimate goal of training is to apply what employees learn in training sessions to their workplace. In this sense, transfer of training has been a vital concern for training effectiveness. For training to be effective, trainees(learners) should be able to use what they learn in training program back on the job. Method: For this research purpose, this study conducted a survey on 170 nuclear operators in nuclear education and training center. Of these, survey result from the 167 recruits were sampled. Theoretical model of this study is based on Holton & Baldwin's(2003) distance model of transfer effects. This study sets transfer effects(near transfer, far transfer) as the main dependent variables. Meanwhile, the independent variables are trainee characteristics, training characteristics, organizational transfer climate. Each independent variable has subordinate variables. Subordinate variables of trainee characteristics are self-efficacy, motivation to learn, motivation to transfer and ability to transfer. Subordinate variables of training characteristics are training contents, ability of trainers, training design, training climate. The last Subordinate variables of organizational transfer climate are support of supervisors, support of peer, support of organization. Conclusion: As a analysis result, trainee characteristics appeared to be in effect only significant influence near far transfer of training, the effect of the far transfer of training, there is no significant. In addition, the training characteristics appeared to be having a significant influence on near and far transfer effects. Organizational transfer climate appeared to be having a significant influence on near and far transfer effects. Finally, near transfer effect appeared to be having a significant influence on far transfer effects. Application: Results of this analysis in the study to training organization and training characteristics of the transition environment effects on nuclear power institutions and operators training organization having a significant impact that says. The transfer of knowledge and technology, as well as that can be applied to a new situation in terms of education and training are important characteristics.

• Composites Research
• /
• v.29 no.2
• /
• pp.45-52
• /
• 2016

An understanding of the failure mechanisms of the adhesive layer is decisive in interpreting the performance of a particular adhesive joint because the delamination is one of the most common failure modes of the laminated composites such as the fiber metal laminates. The interface between different materials, which is the case between the metal and the composite layers in this study, can be loaded through a combination of fracture modes. All loads can be decomposed into peel stresses, perpendicular to the interface, and two in-plane shear stresses, leading to three basic fracture mode I, II and III. To determine the load causing the delamination growth, the energy release rate should be identified in corresponding criterion involving the critical energy release rate ($G_C$) of the material. The critical energy release rate based on these three modes will be $G_{IC}$, $G_{IIC}$ and $G_{IIIC}$. In this study, to evaluate the fracture behaviors in the fracture mode I and II of the adhesive layer in fiber metal laminates, the double cantilever beam and the end-notched flexure tests were performed using the reference adhesive joints. Furthermore, it is confirmed that the experimental results of the adhesive fracture toughness can be applied by the comparison with the finite element analysis using cohesive zone model.

• Korean Medical Education Review
• /
• v.17 no.2
• /
• pp.78-87
• /
• 2015

Mongolia is suffering from the inadequate capacity of medical doctors due to a poor education and training system. The purpose of this article is to evaluate the effect of a clinical training program for capacity building of medical doctors in Mongolia, and to suggest an effective model for continuing professional development in developing countries. Based on the results of a needs assessment, Korean and Mongolian medical experts developed a clinical training program and trained the trainers on 32 topics regarding major clinical problems in 6 specialties, including cardiology, endocrinology, pediatrics, obstetrics and gynecology, neurology, and emergency medicine. Surveillance survey and pre/post-test were used on every topic to evaluate the satisfaction and achievement, respectively, of the trainees. Six months after the clinical training program, we interviewed a sample of medical professionals to evaluate the change and impact. A total of 612 (person-year) medical doctors participated in the training, and the average score for satisfaction was 7.69 out of 8. The average score of the pre-test was 46.9 out of 100, while the post-test was 82.4. After the training, the medical doctors were applying their new knowledge and skills to their practice, and using the materials as guidelines, which improved their practice and increased patient satisfaction. They also started their own training program and adopted new equipment at their hospitals. The satisfaction and achievement of the trainees were very high, and there was significant change in the medical practice, education system, and infrastructure after the training program. This training program can be an effective model for capacity building of medical doctors in developing countries.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2003.04a
• /
• pp.472-477
• /
• 2003

멸종위기종의 서식지를 효율적으로 관리하기 위해서는 해당 종의 서식 가능한 지역의 분포를 알아야 한다. 본 연구의 목적은 GIS와 퍼지집합을 이용하여 산양(Nemorhaedus caudatus)의 서식지적합성모형을 개발하여 멸종 위기종의 서식지를 관리하기 위한 정보를 제공하는 것이다. 산양의 서식지적합성모형 개발을 위한 본 연구의 주요내용은 다음과 같다. 첫째, 산양 서식지 이용에 관한 기존 연구를 바탕으로 산양의 잠재적 서식지 환경변수를 분류하였으며, 분석 대상지의 산양 흔적 조사를 통해 서식지 환경변수의 재분류 및 x²검정(Chi-square test)을 통한 변수들의 유용성을 파악하고, 쌍체비교를 통한 환경변수별 가중치를 계산하였다. 둘째, 기존 부울논리(boolean logic)의 단점을 보완하기 위해 현장 조사의 결과를 바탕으로 퍼지논리(fuzzy logic)에 의한 산양 서식지의 각 환경변수별 주제도를 작성하고, 주제도들의 상관관계를 분석하여 상호 관련성이 높은 변수들의 중복을 피하였다. 셋째, 환경변수별 주제도와 변수별 가중치를 바탕으로 다기준평가기법(MCE, Multi-Criteria Evaluation)을 이용하여 분석대상지의 산양 서식지적합성모형을 개발하였다. 마지막으로, 개발된 서식지적합성모형의 타당성을 검증하기 위해 분석대상지 외부 지역을 대상으로 검증을 실시하였다. 분석 결과 분석대상지의 분류정확도는 서식가능성 0.5를 기준으로 93.94%의 매우 높은 분류정확도를 나타내었으며, 검증대상지에서는 95.74%의 분류정확도를 나타내어 본 모형의 분류정확도는 일관성이 높은 것으로 판단되었다. 또한 전체 공원구역에서 서식가능성 0.5이상의 면적은 59%를 차지하였다.퇴적이 우세한 것으로 관측되었다.보체계의 구축사업의 시각이 행정정보화, 생활정보화, 산업정보화 등 다양한 분야와 결합하여 보다 큰 시너지 효과와 사용자 중심의 서비스 개선을 창출할 수 있는 기반을 제공할 것을 기대해 본다.. 이상의 결과를 종합해볼 때, ${\beta}$-glucan은 고용량일 때 직접적으로 또는 $IFN-{\gamma}$ 존재시에는 저용량에서도 복강 큰 포식세로를 활성화시킬 뿐 아니라, 탐식효율도 높임으로써 면역기능을 증진 시키는 것으로 나타났고, 그 효과는 crude ${\beta}$-glucan의 추출조건에 따라 달라지는 것을 알 수 있었다.eveloped. Design concepts and control methods of a new crane will be introduced in this paper.and momentum balance was applied to the fluid field of bundle. while the movement of′ individual material was taken into account. The constitutive model relating the surface force and the deformation of bundle was introduced by considering a representative prodedure that stands for the bundle movement. Then a fundamental equations system could be simplified considering a steady state of the process. O

• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.4
• /
• pp.336-341
• /
• 2013

In this paper, the design concept of a low-temperature vacuum blackbody was described, and thermophysical model of the blackbody was numerically evaluated. Also the working performance of low-temperature vacuum blackbody was evaluated using infrared camera system. The blackbody system was constructed to operate under high-vacuum conditions ($2.67{\times}10^{-2}$ Pa) to reduce temperature uncertainty, which is caused by vapor condensation at low temperatures usually below 273 K. In addition, both heat sink and heat shield including cold shield were installed around radiator to prevent heat loss from the blackbody. Simplified mathematical model of blackbody radiator was analyzed using modified Stefan-Boltzmann's rule. The infrared radiant performance of the blackbody was evaluated using infrared camera. Based on the results of measurements, and simulation, temperature stability of the low-temperature vacuum blackbody demonstrated that the blackbody system can serve as a highly stable reference source for the calibration of an infrared optical system.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.6
• /
• pp.884-889
• /
• 2015

Appropriate evaluation of thermal insulation property of structural member and valid control of cooling/heating energy are important for improving building's energy efficiency. The typical heating system of house in Korea is the floor heating one. The radiation heating system is not only appropriate to climate and geographic conditions of Korea, but also advantageous to provide emotional comfort by the warm feeling of floor. Based on living conditions in Korea, scaled models of the wooden house and concrete house were designed. The ceiling was made of styrofoam insulation and the four sided walls and bottom were made of plywood and concrete, respectively. The floor was heated by heating film. Indoor vertical temperature distributions by floor heating system were measured by thermocouple, and surface temperatures on walls were measured by infrared thermography. Also, thermal insulation property of wooden wall was evaluated to build database for improving energy efficiency of wooden building. It is expected that collected data during tests of various types of floor and wall composition could be referenced for evaluating thermal environment of actual conditions of houses.