• 자원ㆍ환경경제연구
• /
• 제21권4호
• /
• pp.777-807
• /
• 2012

본 연구는 연산일반균형(CGE) 모형을 활용하여 한국의 자유무역협정(FTA) 확대 정책이 국내 에너지소비와 온실가스 배출량에 미치는 영향을 분석하였다. FTA가 국가경제와 산업구조에 변화를 초래한다면, 이는 국가 에너지수급체계와 온실가스 배출량에도 큰 영향을 끼칠 수 있기 때문이다. 다지역 다부문 CGE모형인 KEEI-GCGE를 통한 분석결과, 이미 발효된 한-미, 한-EU FTA와 더불어 한-중-일 FTA가 현실화되면 우리나라의 실질국내총생산은 2020년에 BaU대비 2.04% 증가하고, 에너지소비와 온실가스 배출량은 각각 3.33%와 1.53% 증가할 것으로 예측되었다. 이와 같은 결과는 향후 여러 국가들과 체결될 FTA는 우리나라의 경제뿐만 아니라 에너지소비와 온실가스 배출량에도 큰 변화를 야기할 가능성이 있음을 의미한다. 따라서 한국의 에너지/기후변화 관련 각종 중장기 계획과 정책들이 FTA로 인해 발생할 수 있는 에너지수급체계와 온실가스 배출량에 대한 영향을 체계적으로 반영해야 함을 시사하고 있다.

• International Journal of Automotive Technology
• /
• 제8권6호
• /
• pp.687-696
• /
• 2007

To increase the reliability of auto-ignition in CAI engines, the thermodynamic properties of intake flow is often controlled using recycled exhaust gases, called internal EGR. Because of the internal EGR influence on the overall thermodynamic properties and mixing quality of the gases that affect the subsequent combustion behavior, optimizing the intake and exhaust valve timing for the EGR is important to achieve the reliable auto-ignition and high thermal efficiency. In the present study, fully 3D numerical simulations were carried out to predict the mixing characteristics and flow field inside the cylinder as a function of valve timing. The 3D unsteady Eulerian-Lagrangian two-phase model was used to account for the interaction between the intake air and remaining internal EGR during the under-lap operation while varying three major parameters: the intake valve(IV) and exhaust valve(EV) timings and intake valve lift(IVL). Computational results showed that the largest EVC retardation, as in A6, yielded the optimal mixing of both EGR and fuel. The IV timing had little effect on the mixing quality. However, the IV timing variation caused backflow from the cylinder to the intake port. With respect to reduction of heat loss due to backflow, the case in B6 was considered to present the optimal operating condition. With the variation of the intake valve lift, the A1 case yielded the minimum amount of backflow. The best mixing was delivered when the lift height was at a minimum of 2 mm.

• 한국자동차공학회논문집
• /
• 제25권1호
• /
• pp.42-50
• /
• 2017

A study has been conducted to develop an aluminum EGR cooler for the LPL EGR system of a diesel engine. Aluminum has a much lower density and thermal conductivity that is about 12 times or more than that of stainless steel, so it is advantageous for use in an EGR cooler for weight reduction and cooling performance effects. A design process has been carried out to ensure heat dissipation performance in a restricted space to investigate the geometric parameters and satisfy the requirements for pressure drops at both fluid sides. The tubes of exhaust gas have been designed as extruded tubes. An aluminum EGR cooler consisting of extruded tubes entails a simpler manufacturing process compared to a stainless steel EGR cooler with conventional heat transfer fins. A prototype has been manufactured from the final model selected through the design process. The performance of the aluminum EGR cooler was evaluated and compared with that of the conventional one. The weight of the aluminum EGR cooler is reduced by 22.9%, while performance is significantly improved.

• Design & Manufacturing
• /
• 제14권2호
• /
• pp.1-6
• /
• 2020

Recently, research and commercialization related to the field of cell-based therapeutic drug development has been actively conducted. In order to maintain cell viability and prevent contamination, refrigeration preservation devices, such as CRF (controlled rate freezer) or vapor type LN2 tanks have been developed. On the other hand, the storage container for liquid nitrogen tanks currently on sale minimizes the flow structure to prevent structural defects when stored in a liquid nitrogen tank having a high thermal conductivity than vapor nitrogen. If the cell-based treatment drug is stored in the gaseous LN2 tank as it is, the cell survival after thawing is greatly reduced. It was estimated that the existing storage container structure was a factor that prevented the rapid entry and circulation of gaseous nitrogen into the container. Therefore, this study intends to propose a new supercellular storage container model that can maintain the mechanical strength while maximizing the fluid flow structure. To this end, we estimated that the structural change of the storage container effects on the equivalent stress formed around the through-holes of them when exposed to a cryogenic environment using thermal-structural coupled field analysis. As a result of storage experiments in the gas phase tank of the cell-based therapeutic agent using the developed storage container, it was confirmed that the cell growth rate was improved from 66% to 77%, which satisfied the transportation standards of the FDA(Food and Drug Administration) cell-based therapeutic agent.

• 공업화학
• /
• 제16권3호
• /
• pp.337-341
• /
• 2005

본 논문은 니켈이 담지된 촉매를 이용하여 메탄의 이산화탄소 개질반응에서 발생하는 탄소퇴적의 속도와 반응온도에 따른 카본생성 경로를 연구하였다. 개질 반응이 진행되는 동안 촉매 위에 발생하는 탄소퇴적과 그 속도측정을 위한 반응장치로는 열분석기를 이용하였다. 메탄의 이산화탄소 개질반응에서 반응기체 조성을 달리하여 실험한 결과 코크형성의 반응차수가 1.33($CH_4$)과 -0.52($CO_2$)임을 확인하였다. 또한, 탄소퇴적속도를 이용한 모델식을 근거로 반응온도에 따른 반응속도인자를 계산한 결과 $600^{\circ}C$ 미만에서는 메탄의 분해반응만이 주로 발생하며 $600{\sim}700^{\circ}C$ 사이에서는 메탄의 분해반응과 더불어 이산화탄소 해리반응이 동시에 진행됨을 알았다.

• Asian Journal of Atmospheric Environment
• /
• 제10권3호
• /
• pp.125-136
• /
• 2016

In this study, the effects of the mesh barrier on the free dispersion of ammonia were numerically investigated under different atmospheric conditions. This study presents the detail and flow feature of the dispersion of ammonia through the mesh barrier on various free stream conditions to decline and limit the toxic danger of the ammonia. It is assumed that the dispersion of the ammonia occurred through the leakage in the pipeline. Parametric studies were conducted on the performance of the mesh barrier by using the Reynolds-averaged Navier-Stokes equations with realizable k-${\varepsilon}$ turbulence model. Numerical simulations of ammonia dispersion in the presence of mesh barrier revealed significant results in a fully turbulent free stream condition. The results clearly show that the flow behavior was found to be a direct result of mesh size and ammonia dispersion is highly influenced by these changes in flow patterns in downstream. In fact, the flow regime becomes laminar as flow passes through mesh barrier. According to the results, the mesh barrier decreased the maximum concentration of the ammonia gas and limited the risk zone (more than 500 ppm) lower than 2 m height. Furthermore, a significant reduction occurs in the slope of the upper boundary of $NH_3$ risk zone distribution at downstream when a mesh barrier is presented. Thus, this device highly restricts the leak distribution of ammonia in the industrial plan.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2002년도 제24회 KOSCO SYMPOSIUM 논문집
• /
• pp.123-132
• /
• 2002

A numerical study was conducted to investigate the combustion phenomena of normal start and unstart processes based on ISL's RAMAC 30 experiments with different diluent amounts and fill pressures in a ram accelerator. The initial projectile launching speed was 1.8 km/s which corresponded to the superdetonative speed of the stoichiometric $H_2/O_2$ mixture diluted with 5 $CO_2$ or 4 $CO_2$. Experiments with same condition except for projectile surface material demonstrated that ignition was successful with an aluminum projectile, but no combustion was observed in case of a steel projectile. In this study, it was found that neither shock nor viscous heating was sufficient to ignite the mixture at a low speed of 1.8 km/s, as was found in the experiments using a steel projectile. However, we could succeed in igniting the mixtures by imposing a minimal amount of additional heat to the combustor section and simulate the normal start and unstart processes found in the experiments with an aluminum projectile. For the numerical simulation of supersonic combustion, multi-species Navier-Stokes equations coupled with a Baldwin-Lomax turbulence model and detailed chemistry reaction equations of $H_2/O_2/CO_2$ suitable for high-pressure gaseous combustion were considered. The governing equations were discretized by a high order accurate upwind scheme and solved in a fully coupled manner with a fully implicit, time accurate integration method. The numerical results matched almost exactly to the experimental results. As a result, it was found that the normal start and unstart processes depended on the strength of gas mixture, development of shock-induced combustion wave stabilized by the first separation bubble, and its size and location.

• International Journal of Automotive Technology
• /
• 제7권1호
• /
• pp.83-90
• /
• 2006

The purpose of this paper is to describe the design and implementation of an unmanned ground vehicle, called the TailGator at CIMAR (Center for Intelligent Machines and Robotics) of the University of Florida. The TailGator is a gas powered, four-wheeled vehicle that was designed for the AUVSI Intelligent Ground Vehicle Competition and has been tested in the contest for 2 years. The vehicle control model and design of the sensory systems are described. The competition is comprised of two events called the Autonomous Challenge and the Navigation Challenge: For the autonomous challenge, line following, obstacle avoidance, and detection are required. Line following is accomplished with a camera system. Obstacle avoidance and detection are accomplished with a laser scanner. For the navigation challenge, waypoint following and obstacle detection are required. The waypoint navigation is implemented with a global positioning system. The TailGator has provided an educational test bed for not only the contest requirements but also other studies in developing artificial intelligence algorithms such as adaptive control, creative control, automatic calibration, and internet-base control. The significance of this effort is in helping engineering and technology students understand the transition from theory to practice.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권3호
• /
• pp.211-221
• /
• 2020

This study aims to analyze the effect of structural Person-Organization Fit and organizational justice on organizational commitment, job satisfaction, Organizational Citizenship Behavior and employee performance. This study is based on a quantitative approach by collecting data using a survey conducted on three SOE's companies in Indonesia that operate in Makassar City, namely Pelindo. Ltd (Port Company), PLN. Ltd (Electric Company) and Pertamina. Ltd (Oil and Gas Company), with a sample of 90 employees. The study population was all non-managerial permanent employees. Data analysis using Structural Equation Modeling. In structural relations, out of the nine direct tests, there were two insignificant relationships, and in all three hypotheses there was one not-supported hypothesis. When compared between person-organization Fit and Organizational Justice, it is found that organizational justice has a more critical role in building Human Resource performance compared to Person-Organization Fit, because organizational justice is better able to provide job satisfaction and make organizational commitment and OCB as a prerequisite for its formation to better Human Resources performance. With organizational justice, employees will feel more satisfied working, committed to the work and organization, and behaves as a supportive organizational citizen for the realization of the best performance for the interests of the organization going forward.

• 한국산학기술학회논문지
• /
• 제15권11호
• /
• pp.6412-6418
• /
• 2014

본 논문은 기체-액체 이젝터의 수치해석연구에 초점을 맞추고 있다. 이젝터는 구동유체가 노즐을 통해 고속으로 분출될 때, 구동노즐 출구 주변에 진공압이 형성되어 주변의 기체와 운동량 교환을 통하여 저압의 유체를 보다 높은 압력으로 압축하여 수송하는 장치이다. 기체-액체 이젝터는 상용 소프트웨어 ANSYS-CFX 14.0을 사용하여 다상의 CFD 분석을 통해 연구한다. 구동유체는 물을 사용하여 구동되며, 실제로는 공기가 아닌 오존을 사용하여 배출 된다. 기체-액체 이젝터의 디퓨저의 형상에 따라 성능 차이를 비교한다. 결과 기체-액체 이젝터의 성능에 미치는 다양한 요인을 제공 한다. 그리고 제안 된 수치 모델은 기체-액체 이젝터의의 최적 설계에 매우 도움이 될 것다.