• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.290-293
• /
• 2008

This paper proposes a criterion to select the modes for modal truncated model of flexible rotor only supported by active magnetic bearings. The proposed approach relies on the concepts of minimum control input and output energy assuming that the system is subjected to transient disturbances. Accurate large order model for the levitated rotor is taken by finite element analysis and transformed to the modal equation. By proposed methodology, which modal states should be retained in the truncated model are investigated over the whole operational speed range by the calculation. Finally, the effectiveness is verified by checking the model error between original model and reduced model.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.579-586
• /
• 2009

4D simulation integrates the 3 dimensional model of a building with the construction schedule, and it leads to the possibility of virtually checking the construction process and the building itself in advance. However, the existing problem of 4D simulation is the difference between the demands of architects, engineers, and construction site workers in 4D simulation. This study suggests the possible way to enhance the availability of 4D simulation, considering more the practical demands from the construction site. In order to conduct this study, we build a 3D BIM model of a business-residential complex and link the model with the pre-defined construction schedule in order to make a 4D simulation. This study concludes with the optimized 4D simulation methodology based on BIM model considering the demands in perspective of the construction site. It would contribute to the harmonic collaboration among architects, engineers, and labors in the construction site when using 4D simulation based on BIM model.

• Journal of KIISE:Software and Applications
• /
• v.29 no.12
• /
• pp.860-872
• /
• 2002

Fault tree analysis is the most widely used saftly analysis technique in industry. However, the analysis is often applied manually, and there is no systematic and automated approach available to validate the analysis result. In this paper, we demonstrate that a real-time model checker UPPAAL is useful in formally specifying the required behavior of safety-critical software and to validate the accuracy of manually constructed fault trees. Functional requirements for emergency shutdown software for a nuclear power plant, named Wolsung SDS2, are used as an example. Fault trees were initially developed by a group of graduate students who possess detailed knowledge of Wolsung SDS2 and are familiar with safety analysis techniques including fault tree analysis. Functional requirements were manually translated in timed automata format accepted by UPPAAL, and the model checking was applied using property specifications to evaluate the correctness of the fault trees. Our application demonstrated that UPPAAL was able to detect subtle flaws or ambiguities present in fault trees. Therefore, we conclude that the proposed approach is useful in augmenting fault tree analysis.

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.3
• /
• pp.211-215
• /
• 2009

As Programmable Logic Controllers (PLCs) are increasingly used to implement safety critical systems such as nuclear instrumentation & control system, formal verification for PLC based programs is becoming essential. This paper proposes a formal verification technique for PLC program implemented with function block diagram (FBD). In order to verify an FBD program, we translate an FBD program into a Verilog model and perform model checking using SMV model checker We developed a tool, FBD Verifier, which translates FBD programs into Verilog models automatically and supports efficient and intuitive visual analysis of a counterexample. With the proposed approach and the tool, we verified large FBD programs implementing reactor protection system of Korea Nuclear Instrumentation and Control System R&D Center (KNICS) successfully.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2005.11a
• /
• pp.51-55
• /
• 2005

Assuring integrity of permission assignment (PA) constraints is a difficult task in role-based access control (RBAC) because of the large number of constraints, users, roles and permissions in a large enterprise environment. We provide solutions for this problem using the conflict concept. This paper introduces the conflict model in order to understand the conflicts easily and to detect conflicts effectively. The conflict model is classified as a permission-permission model and a role-permission model. This paper defines two type conflicts using the conflict model. The first type is an inter-PA-constraints (IPAC) conflict that takes place between PA constraints. The other type is a PA-PAC conflict that takes place between a PA and a PA constraint (PAC) Also, the conditions of conflict occurrence are formally specified and proved. We can assure integrity on permission assignment by checking conflicts before PA and PA constraints are applied.

• Journal of Korean Society of Water and Wastewater
• /
• v.10 no.2
• /
• pp.88-103
• /
• 1996

The objective of this study is to develop stochastic and deterministic models which could be used to synthesize water application time series. Adaptive models using mulitivariate ARIMA(Transfer Function Model) are developed for daily urban water use forecasting. The model considers several variables on which water demands is dependent. The dynamic response of water demands to several factors(e.g. weekday, average temperature, minimum temperature, maximum temperature, humidity, cloudiness, rainfall) are characterized in the model by transfer functions. Daily water use data of Kumi city in 1992 are employed for model parameter estimation. Meteorological data of Seonsan station are utilized to input variables because Kumi has no records about the meteorological factor data.To determine the main factors influencing water use, autocorrelogram and cross correlogram analysis are performed. Through the identification, parameter estimation, and diagnostic checking of tentative model, final transfer function models by each month are established. The simulation output by transfer function models are compared to a historical data and shows the good agreement.

• Korean Journal of Remote Sensing
• /
• v.18 no.2
• /
• pp.97-105
• /
• 2002

In this paper, we proposed a simplified strategy for the epipolarity of linear pushbroom imagery. The proposed strategy is verified on "Gupta and Hartly" sensor model and "Orun and Natarajan" sensor model. It is also compared with the precise epipolarity model of each sensor model on SPOT and KOMPSAT imagery. For the quantitative analysis, 20 ground control points are used as independent checking points. Based on the results, the accuracy of the proposed strategy is not different from that of the precise epipolarity model of each sensor model (below 0.1 pixels). Under the worst circumstance, the proposed strategy is robust. We can assure that the proposed strategy will show high accuracy on most of sensor models based on the co-linearity equations.

• Transactions on Electrical and Electronic Materials
• /
• v.6 no.6
• /
• pp.256-261
• /
• 2005

This paper presents that the modeling to predict the characteristics with respect to the performance of solenoid embedded inductors manufactured by LTCC process via the nonlinear regression model based on the quasi-Newton method. In order to reduce the runs, the design of experiments (DOE) was used to generate the design space. The nonlinear process models were constructed by the piecewise regression model based on the quasi-Newton method for estimating the model coefficient with the break point on the statistical confidence intervals. Those models were verified by the model accuracy checking based on the assumption statistically.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.12
• /
• pp.1485-1492
• /
• 1999

대규모 시스템 명세의 올바름을 검증하기 위한 유한 상태 LTS에 기반을 둔 CTL논리 적용에 있어 가장 큰 문제점은, 시스템 내부의 병렬 프로세스간의 상호작용으로 인한 상태폭발이다. 그러나 Modal mu-calculus 논리를 시스템 안전성 및 필연성 특성 명세에 사용하면, 행위에 의한 순환적 정의가 가능하므로 상태폭발 문제가 해결 가능하다. 본 논문에서는 LTS로 명세화된 통신 프로토콜 시스템 모델의 안전성 및 필연성 특성을 모형 검사 기법에 의해 검증함에 있어, 시제 논리로 사용된 Modal mu-calculus 안전성 및 필연성 논리식과 CTL 의 안전성 및 필연성 논리식의 극한값이 동일함을 두 논리식을 만족하는 상태 집합이 같다는 것을 보임으로써 증명한다. 증명된 결과는 I/O FSM 모델로 표현된 통신 프로토콜의 안전성 및 필연성 검사를 위해 이론적인 기반으로서, 컴퓨터를 이용한 모형검사 기법에 효과적인 방법으로 응용이 가능하다.Abstract In applying CTL-based model checking approach to correctness verification of large state transition system specifications, the major obstacle is the combinational explosion of the state space arising due to interaction of many loosely coupled parallel processes. If, however, the modal mu-calculus viewed as a CTL-based logic with recursion, is used to specify the safety and liveness property of a given system, it is possible to resolve this problem. In this paper, we discuss the problem of verifying communication protocol system specified in LTS, and prove that a logic expression specifying safety and liveness in modal mu-calculus is semantically identical to the maximum value of the expression in CTL. This relation is verified by the proof that the sets of states satisfying the two logic expressions are equivalent. The proof can be used as a theoretical basis for verifying safety and liveness of communication protocols represented as I/O FSM model.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.3C
• /
• pp.92-101
• /
• 2005

It is difficult to detect the accurate detection which leads the camera it moves follows in change of the noise or illumination and Also, it could be recognized with backgound if the object doesn't move during hours. In this paper, the proposed method is updating changed background image as much as N＊M pixel mask as time goes on after get a difference between imput image and first background image. And checking image pixel can efficiently detect moving by computing fixed distance pixel instead of operate all pixel. Also, set up minimum area of object to use boundary point of object abstracted through checking image pixel and motion detect of object. Therefore motion detection is available as is fast and correct without doing checking image pixel every Dame. From experiment, the designed and implemented system showed high precision ratio in performance assessment more than 90 percents.