본 연구에서는 그물식 뿌리말뚝의 타설경사각과 횡방향저항력 사이의 관계를 비교분석하고자 여러가지의 타설경사각을 갖는 모형 그물식 뿌리말뚝을 제작하여 모형지반에 설치한 다음 횡방 향재하시험을 하였다. 모형 뿌리말뚝의 배치는 12개의 말뚝을 6개씩 2개의 크고 작은 동심원에 접하도록 하였는데 각각의 시험에 사용한 모형말뚝은 $0^{\circ}\;, 5^{\circ}\;, 10^{\circ}\;, 15^{\circ}\;, 20^{\circ}\;, 25^{\circ}$의 타설경사각을 갖 는 직경 5m의 강봉에 모래를 입힌 것이다. 횡방향하중을 받는 뿌리말뚝에 있어서 실험을 통해 얻은 하중변위곡선으로 판단해 볼 때 1mm정도의 횡방향변위에서는 타설경사각이 커질수록 횡방향저항력도 커지지만 최적 타설경사 각은 횡방향변위가 증가할수록 감소하며 6mm의 횡방향변위에서는 $17.5^{\circ}$. 타설경 사각 $0^{\circ}$횡방향저항력에 대한 최적 타설경사각에서의 횡방향저항력의 비는 횡방향변위가 증가할수록 감소하므로 횡방향변위가 커질수록 말뚝을 경사지게 배치함으로써 얻는 저항력 증대효과는 줄어들 것으로 예상된다.
본 연구에서는 여러 가지의 타설경사각을 갖는 모형 그물식 뿌리말뚝을 제작하여 모형토조에 설치하고 레이닝(raining)방법으로 지반을 조성한 다음 재하시험을 하여 그물식 뿌리말뚝의 타설경사각과 극한지지력 사이의 관계를 비교분석 하였다. 모형말뚝은 0$^{\circ}$, $10^{\circ}$, 15$^{\circ}$, 20$^{\circ}$의 타설경 사각을 갖는 직경 5m의 강봉에 모래를 입힌 것으로 직경이 6.5mm, 길이가 300mm가 되도록 하였다. 그리고, 모형 원형 얕은기초를 제작하여 재하시험을 수행한 다음 극한지지력을 구해 부리말뚝의 극한지지력과 비교하였다. 실험결과 타설경사각이 15$^{\circ}$일때 극한지지력이 최대가 되었다. 타설경사각이 15$^{\circ}$인 뿌리말뚝의 극한지지력은 원형 얕은기초의 극한지지력과 비교하면 2.2배이고, 연직으로 타설된 뿌리말뚝의 경우와 비교하면 22%의 극한지지력 증가효과가 있었다. 반면에 타설경사각이 20$^{\circ}$인 경우의 극한지지력은 연직 뿌리말뚝의 극한지지력보다 5% 감소된 값을 가짐을 알 수 있었다. 하중-침하 량곡선은 타설경사각이 없는 경우에 전반전단파괴 형태를 나타내며, 타설경사각이 $10^{\circ}$인 경우, 하중은 극한지지력에 도달한 후 일정한 값을 유지하는 양상을 보인다. 타설경사각이 15$^{\circ}$, 20$^{\circ}$로 증가하면서 하중은 극한지지력에 도달한 후에도 계속 증가하는 경향이 있다. 따라서, 타설경사각이 있는 경우의 뿌리말뚝은, 극한지지력을 초과하여 하중을 받더라도 급격한 파괴에 이르지 않고 점차로 변위가 증가하는 연성 (ductile)거동을 보일 것으로 예상된다.라이스토세와 홀로세까지 큰 변화없이 식물상과 식생이 지속적으로 명맥이 유지되고 번성하였다, 이는 한 반도가 여러 차례가 기후 변화에 따라 식생대의 이동은 있었으나 식물상의 멸종을 가져올 정도의 환경적 격변을 겪지 않고 비교적 안정적인 환경이 장기간 지속되었음을 의미한다. 아울러 기후가 변화할 때마다 식물들리 서식, 생존할수 있는 다양한 피난처가 한반도의 도 처에 산재되어 있었음을 뜻한다,.sening trend)을 나타낸다. 이러한 퇴적상 변화는 저조선에 서 만조선으로의 조간대 지형과 주조수로의 지형.수력학적 특성이 다음과 같기 때문이다. a) a general decrease in width b) a general decrease in depth c) a general decrease in maximum and average current velocities d) a general increase in contents of suspended mud e) a general decrease in grain size of the bottom sand and an increasing abundance of muddy deposits. 우리나라 서해안 조간대 퇴적층(체)의 수직 층서(vertical stratigraphy)는 지난 3여년동안의 수십개의 vibracoring(주상시추)에 의하여 매우 흥미롭고 중요하게 밝혀지고 있는바 이것은 현세(Holocene)와 선현세(preHolocene: 11000 years BP)의 오랜시간 경과에 따른 조수환경 변화의 수직퇴적 과정과 기후 해수면 변화의 현상에 원인이 있다고 해석된다.(박용안 외, 1992-1995)결과적으로 서해안 조수퇴적체(층)의 분지주변(basim margin)진화과정이 밝혀지 고 있다.confusely in the middle of 19th century.rds of foreign origin
This study aims to simulate the stabilization process of fibrous peat samples using end-bearing Cement Deep Mixing (CDM) columns by three area improvement ratios of 13.1% (TS-2), 19.6% (TS-3) and 26.2% (TS-3). It also focuses on the determination of approximate stress distribution between CDM columns and untreated fibrous peat soil. First, fibrous peat samples were mechanically stabilized using CDM columns of different area improvement ratio. Further, the ultimate bearing capacity of a rectangular foundation rested on the stabilized peat was calculated in stress-controlled condition. Then, this process was simulated via a FEM-based model using Plaxis 3-D foundation and the numerical modelling results were compared with experimental findings. In the numerical modelling stage, the behaviour of fibrous peat was simulated based on hardening soil (HS) model and Mohr-Coulomb (MC) model, while embedded pile element was utilized for CDM columns. The results indicated that in case of untreated peat HS model could predict the behaviour of fibrous peat better than MC model. The comparison between experimental and numerical investigations showed that the stress distribution between soil (S) and CDM columns (C) were 81%C-19%S (TS-2), 83%C-17%S (TS-3) and 89%C-11%S (TS-4), respectively. This implies that when the area improvement ratio is increased, the share of the CDM columns from final load was increased. Finally, the calculated bearing capacity factors were compared with results on the account of empirical design methods.
본 연구는 파이프하우스의 구조적 안전성을 검토하는데 필요한 기초자료를 구축하기 위하여 실시하였다. 지반에 매입된 파이프의 지점상태를 검토하여 적합한 구조해석 모델을 찾고, 파이프를 말뚝기초로 가정했을 때의 파이프의 지지력 및 인발 저항력을 구하기 위하여 모형 실험을 실시하였으며, 그 결과를 요약하면 다음과 같다. 1. 파이프하우스의 지점상태를 검토해본 결과 단동 하우스에서는 수평 및 연직하중 모두 고정으로, 연동하우스에서는 수평하중 재하시 힌지, 연직 하중 재하시 고정으로 해석하는 것이 실험치에 더 가까운 것으로 나타났다. 2. 지반에 매입된 파이프의 인발저항력은 파이프 직경 및 매입깊이에 따라 논의 연한지반에서는 35-54kg, 밭의 보통지반에서는 61-98kg, 단단한 지반에서는 108-120kg이상으로 나타났으며, 파이프와 흙사이의 주변마찰력은 1.51-4.76t/$m^2$정도의 범위를 보였다. 3. 파이프 직경 및 매입깊이에 따른 기초 지지력은 연한지반의 경우 35-76kg, 보통지반은 88-158kg, 단단한 지반은 131-305kg의 범위를 보였으며, 파이프의 선단지지력은 연한지반 0-22kg, 단단한 지반 22-140kg으로 나타났다. 4. 국내에서 많이 보급되어 있는 대표적인 파이프하우스의 경우, 적설심 30cm 까지는 파이프의 매입깊이가 30cm이면 지지력이 충분하지만 그 이상의 적설심에서는 지반의 종류에 따라 매입깊이를 증가시켜야 하고, 인발저항의 경우도 풍속 30㎧까지는 매입깊이 30cm이면 충분하지만 그 이상의 풍속에 대하여는 매입깊이를 증가시키거나 보강이 필요한 것으로 나타났다.
말뚝의 지지력과 거동을 예측하기 위하여 다양한 연구들이 수행되었음에도 불구하고, 메커니즘에 대한 전반적인 이해가 아직까지 미흡한 실정이다. 이는 많은 인자들이 서로 복잡한 연관성을 맺으며 말뚝의 거동에 영향을 미치기 때문이다. 따라서 지반조건과 말뚝조건 및 항타조건 등 과 관련된 많은 인자들 가운데 지지력에 중요한 영향을 미치는 인자들을 도출하기 어려우며, 또한 인자들 간의 복잡한 연관성을 지지력 공식에 적합하게 고려하기란 매우 어렵다. 본 연구에서는 항타말뚝들에 대한 동재하시험으로부터 선단 및 주면 지지력을 포함한 지지력을 예측하기 위하여 인공신경망이 적용되었다. 첫째로, 신경망 모델링에 근거한 민감도 분석를 통하여 지지력에 대한 각 영향인자들의 영향이 검토되었다. 둘째로, 지지력 예측을 위한 최적의 인공신경망 모델을 도출하기 위하여 인공신경망과 유전자 알고리즘으로 구성된 설계기법이 적용되었다. 이를 통해 토사지반에 관입된 항타말뚝의 지지력을 산정할 수 있는 최적의 인공신경망 모델을 제안하고자 하였다. 사용된 설계기법을 통하여 적합한 입력층 조합, 은닉층 노드수과 각 층 사이의 연결구조를 도출하였다. 도출된 인공신경망 모델을 적용함으로써 항타말뚝의 지지력을 간단하며 신뢰성 있게 예측할 수 있음을 알 수 있다.
본 연구에서는 지금까지 수행한 일련의 결과들에 근거한 지반력 계수와 극한 지반반력을 역해석적 방법으로 결정하고 이를 이용하여 비균질 지반에서의 비선형 수평거동을 예측할 수 있는 해석기법을 제안하고자 함이 목적이다. Chang이 제안한 해석기법은 비균질 지반의 비선형적인 거동을 예측하기에는 어려움이 있다. 이에 본 연구에서는 말뚝의 비선형 거동 예측을 위하여 Chang 모델에 p - y 곡선을 적용하는 복합적인 해석기법을 제안하고 해석 프로그램을 개발하였다. 그리고 본 해석기법의 적용성 검증을 위하여 모형실험 및 현장실험 결과와 상용 프로그램인 Pentagon2D을 이용한 해석 결과와 비교 검토하였다. 해석상에 이용한 지반반력 계수와 극한 지반반력은 균질지반에서 결정된 값을 비균질 지반에 적용하였으며, 본 해석기법에 의한 거동 예측결과는 모형실험 결과와 잘 일치하였다. 또한 현장실험과의 비교에서도 정도 높은 일치성을 보였다.
Steel-concrete composite columns are popular for superstructures of bridges, and the outside steel attached to the shaft increases the shaft resistance due to confining concrete. In this study, lateral resistance of steel-concrete composite drilled shafts was evaluated quantitatively based on numerical analysis when steel casings are used as structural elements like composite columns. Ultimate lateral resistance of composite drilled shafts with various diameters was numerically calculated through 3D finite element analysis. For that, elasto-plastic model with perfectly plasticity is involved to capture the ultimate load. A commercial FEM program, MIDAS-GTS, is used in this study. Real field conditions of the West Coast, Korea were considered to set up the ground conditions and pile lengths required for this parametric studies. Detailed characteristics of the stress and displacement distributions are evaluated for better understanding the mechanisms of the composite shaft behavior.
Top-Base Foundation(TBF) was developed in Japan as a factory made concrete product. It is actively used in 6,000 sites by the end of 1980s in Japan and applied for a domestic patent in 1985. It is a shallow foundation whose effectiveness is proven by many relevant researchers and engineers. TBF was introduced to Korea in 1991 and has been applied mainly to architectural structures to date. Currently, the effectiveness in bearing capacity and settlement of TBF is being underestimated for civil engineering structures. Characteristics of Top-Base Foundation studied in Japan and Korea is known as follows: (1) as concrete part and crushed stone behave together, they perform the function of rigid mat; (2) the conical part and pile part of TBF disperses load by interaction with the crushed stone; (3) by preventing lateral strain and differential settlement on lower ground, it improves bearing capacity and constrains settlement at the same time. In Korea, it is used mostly in clayey soft grounds. The formula of bearing capacity and settlement of TBF suggested in Japan give the values of the underestimated. bearing capacity while its settlement is overestimated in comparison with the values measured from the field loading test. Therefore, in this study, the stress delivery mechanism of Top-Base Foundation developed in Japan and Floating Top Base developed in Korea is investigated through numerical analysis and laboratory model test.
Offshore platforms in seismically active areas must be designed to survive in the face of intense earthquakes without a global structural collapse. This paper scrutinizes the seismic performance of a newly designed and established jacket type offshore platform situated in the entrance of the Gulf of Suez region based on the API-RP2A normalized response spectra during seismic events. A nonlinear finite element model of a typical jacket type offshore platform is constructed taking into consideration the effect of structure-soil-interaction. Soil properties at the site were manipulated to generate the pile lateral soil properties in the form of load deflection curves, based on API-RP2A recommendations. Dynamic characteristics of the offshore platform, the response function, output power spectral density and transfer functions for different elements of the platform are discussed. The joints deflection and acceleration responses demands are presented. It is generally concluded that consideration of the interaction between structure, piles and soil leads to higher deflections and less stresses in platform elements due to soil elasticity, nonlinearity, and damping and leads to a more realistic platform design. The earthquake-based analysis for offshore platform structure is essential for the safe design and operation of offshore platforms.
본 논문에서는 근접 사진측량에 기반하여 모형 토조 내 지반의 변위를 측정하기 위한 연구를 진행하였다. 알루미늄 프레임 및 투명 아크릴로 제작된 실내 모형 토조 내에 토사를 채워 넣고, 하중 재하 장치를 이용한 하중 재하를 통한 토사의 변위를 사진측량 기법으로 측정하였다. 토조 내의 토사는 영상 기반 자동 매칭을 위하여 검은 모래 약 40%, 일반 모래 약 60% 혼합하여 영상 대비의 정도를 높일 수 있도록 계획하였다. 전처리 과정으로서 실험실 카메라 캘리브레이션을 통해 내부표정요소를 도출하였고, 토조 프레임에 배치된 기준점을 이용한 후방교회법을 통해 외부표정요소를 예측하였다. 이후 영상 매칭을 통해 하중 전, 후의 토사 변위 패턴을 측정하였으며, 영상 매칭 시 활용되는 매칭 윈도우 크기 및 영상 스무딩 정도를 변경 적용하여 그 결과를 평가해보았다. 실험 결과, 매칭 윈도우 크기 65×65픽셀의 경우 안정적인 변위 도출이 가능하였으며, 영상 스무딩은 매칭의 과대 오차를 감소하는 효과를 보여주었다. 이를 통해 사진 측량을 통한 토조 내 지반 변위 패턴을 도출할 수 있었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.