• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.7-12
• /
• 2004

Large-sized pins are usually used to lift and handle large low speed diesel engine crankshaft. There has then been a need to reduce and optimize the weight of the traditionally used pins. Making an hole by cutting the inside of the pin out was investigated in view of static and fracture strength. To compensate the stress increase caused by the introduction of the inner hole, the groove in the circumferential direction pre-existing on the pin is to be removed. Finite element analysis was carried out for both the original model and weight reduced model. Stress intensity factors for semi-elliptical defects assumed on the pin for the original model and weight reduced model was calculated using the ASME method and compared with the fracture toughness test result of the pin material. The diameter of the cutting hole for the revised model was determined based on the analysis results.

• Coupled systems mechanics
• /
• 제11권2호
• /
• pp.107-119
• /
• 2022

The aim of the work presented in this paper is development of numerical model for prediction of temperature distribution in pavement according to the measured meteorological parameters, with introduction of non-linear heat transfer coefficient which is a function of temerature difference between the air and the pavement. Developed model calculates heat radiated from the pavement back in the air, which is an important part of the heat trasfer process in the open air surfaces. Temperature of the pavement surface, heat radiation together with many meteorological parameters were measured in series during two years in order to validate the model and calibrate model parameters. Special finite element method for temperature heat transfer towards the soil together with the time integration scheme are used to solve the governing equation. It is proved that non-linear heat transfer coefficient, which is a function of time and temperature difference between the air and the pavement, is required to decribe this phenomena. Proposed model includes heat tranfer coefficient callibration for specific climate region, through the iterative inverse procedure.

• 한국ITS학회 논문지
• /
• 제12권6호
• /
• pp.22-28
• /
• 2013

본 연구에서는 대전광역시를 대상으로 향후 카쉐어링 서비스를 제공할 경우를 가정하고 위치 선정방안을 제시하는 것을 목적으로 한다. 이를 위해 GIS Arc/Info 10 소프트웨어를 활용하여 대전광역시 전역을 $500m{\times}500m$ 크기의 셀로 구분하고 카쉐어링 서비스에 영향을 미칠 것으로 예상되는 요인들을 선정하고 각 요인들의 값을 표준화하는 과정을 거쳤다. AHP 기법을 도입하여 각 요인별 가중치를 전문가 설문을 통해 결정하고 모든 셀($500m{\times}500m$ 크기)별로 적합도 지수를 산정하였으며, 네트워크 분석(Network Analysis)모듈에 내장되어있는 입지배분모델(Location-allocation Model)을 이용하여 서비스 시설의 위치를 30개의 권역으로 선정하는 방안을 제시하였다. 본 연구에서 제안한 카쉐어링 서비스 위치선정을 위한 방안은 향후 카쉐어링 서비스가 도입될 때 기초 자료로 활용할 수 있을 것으로 기대되며, 향후 적정한 수요의 추정과 경제성 검토 등에 대한 추가연구가 필요할 것으로 판단된다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.264-267
• /
• 2004

In identifying flood vulnerable areas, three methods are generally deployed: the geomorphology method which is based on topographic features; the past evidence method based on observed data of past actual floods; and, prediction of flood areas through hydrologic models. This study aims to improve the prediction model of the geomorphology method through the application of fuzzy method in GIS modeling. The generally used GIS method of superimposing thematic map layers assumes crisp boundaries of the layers, which results in either risk-averse solutions or risk-taking solutions. The introduction of fuzzy concepts to processing of evaluation criteria (DEM, slope, aspect) solves this problem. As the result of applying the fuzzy method to a test site in the west Nak-Dong river, similar flood vulnerable areas were predicted as when using the conventional Boolean criteria. The resulting map, however, showed varying degree of uncertainty of flooding in these areas. This extra information is deemed to be valuable in taking phased actions during flood response, leading to a more effective and timely decision-making.

• 자원환경지질
• /
• 제53권6호
• /
• pp.703-713
• /
• 2020

수리지질학을 포함한 많은 지질학 분야에 있어 지하 매질의 불균질성을 규명하는 것은 큰 중요성을 가진다. 본 연구에서는 최근 Park(2020)에 의해 소개된 바 있는 대수층을 구성하는 매질의 수리물성을 예측할 수 있는 기법의 개념 및 이론을 간단히 소개하고, 가상의 대수층에 해당 기법을 적용하여 기법에 의한 결과들의 다양한 시사점을 도출하였다. 소개하는 기법은 공분산행렬 적응 진화전략이라는 광역최적화 기법을 사용하며, 개념적으로 대수층에 가해지는 수리적 스트레스에 의한 지하수위 변화 자료를 동화하여 대수층 불균질성을 특성화하는 방법론이다. 가상의 대수층의 수리전도도 예측에 개발 기법을 적용한 결과, 총 40000개 미지의 값을 매우 빠른 시간 내에 예측함을 확인하였다. 또한, 예측의 결과는 레퍼런스 수리전도도와 수치적 및 구조적으로 큰 유사성을 보여 예측의 질적 수준이 높음을 확인하였다. 본 연구에서는 매우 제한적인 케이스에 대하여 적용을 실시하였으나, 기법의 추가개발을 통하여 보다 다양한 케이스에의 적용이 가능할 것으로 예상되며 현재 이를 위한 추가 개발이 이루어지고 있는 상황이다. 개발 기법은 수리지질학 분야 뿐만 아니라 다양한 지질학 및 지구물리 분야에 적용될 수 있는 잠재성을 갖추고 있다.

• 한국정보통신학회논문지
• /
• 제25권4호
• /
• pp.558-564
• /
• 2021

최근 5G 도입에 따라 생활 전반으로 전자파 방사원이 확산됨에 따라 국민 중심 전자파 안전관리 체계 구축이 필요한 실정이다. 특히 5G 안테나의 빔포밍 방식은 무선기지국 설치시 전자파의 전력밀도 측정은 10배 이상으로 증가되어 물리적인 측정으로 안전성을 판단하는 것은 무리가 있다. 따라서 체계적인 모델 분석을 통하여 계산에 의한 예측기법으로 생활속에 전자파 안전 유무를 판별할 필요가 있다. 본 논문에서는 이같은 문제를 해결하기 위한 방법으로 전자파 수치해석툴을 사용한 5G 무선기지국의 가능성을 확인하기 위해서 실제 기지국 측정값과 예측 모델을 통한 예측값을 상호 비교하는 신뢰도 평가를 통하여 가능성을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 B
• /
• pp.748-750
• /
• 1999

In this study, a speech enhancement is presented based on the utilization of well-known auditory mechanism, noise masking. The speech enhancement approach adopted here is to derive an modifier that achieves audible noise suppression. This modification selectively affects the perceptually significant spectral values, and is therefore less prone to introduction of unwanted distortions than methods that affect the complete STSA and produces more enhanced results at low SNR as well as at high SNR. The speech enhancement method adopted here needs exact estimation of the minimum specteal value per critical band because it uses only the minimum spectral value per critical band. For this, the method adopted here uses the modified spectral subtraction that is more flexible than power spectral subtraction. So, the result in experiment represented better SNR than before.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 춘계학술발표대회 논문집
• /
• pp.256-262
• /
• 2009

Purpose of this study is embody the environmental-friendly military facility model that applied renewable energy, passive design method and high efficiency equipment. In the introduction of this study, defined problem of existing military facility and classification of military facility are performed. Also, environmental friendly military facility is defined through classified by scale and building equipment method. In the renewable energy chapter, photovoltaic system and wind turbine system are considered And then, LED light, photovoltaic panel, motor, inverter are analyzed in the high efficiency equipment chapter.

• 한국정보시스템학회지:정보시스템연구
• /
• 제26권4호
• /
• pp.401-418
• /
• 2017

Purpose: Since the cost of feed for Korean pig farmers has been increasing, attracting crowdfunding for the swine industry become important. This paper applies the AHP decision-making method to build a model for the sustainable growth of crowdfunding in the swine industry. Design/methodology/approch: The result from the analysis of data collected from this research shows that both investors and borrows groups consider tangible assets to be most important for crowdfunding in the swine industry. Findings: Thus protection of investors should be resolved first by providing collateral rather than insisting on the conventional crowdfunding method that stresses the credit aspects only. The investors and borrows groups also judged the loan amount very important, suggesting that the smooth and sufficient investment should be secured for borrows group.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2000년도 학술발표회 발표논문집
• /
• pp.425-430
• /
• 2000

In the analysis of deformation in which the stiffness is greatly different between the adjacent materials, the desired results have been obtained by using the interface element method compared with those secured by the conventional method of the concept of continua. This study deals with the deformation analysis of soft foundation by the introduction of interface element. The physical conditions of interface element are divided into three categories by Mohr-Coulomb failure criterion ie. sliding, separation, and contact. Finally the accuracy of the program proposed in this paper is proved highly accurate by performing the comparison of the theoretical values numerical results of a model element with simplified boundary conditions.