• 대한산업공학회지
• /
• 제36권2호
• /
• pp.108-116
• /
• 2010

The maintenance of a deteriorating system is often imperfect. Previous studies have shown that the imperfect preventive maintenance (PM) can reduce the wear out and aging effects of deteriorating systems to a certain level between the conditions of as good as new and as bad as old. In this paper, we employ the concept of the improvement factor in investigating two optimal PM policies; failure limit policy and periodic PM policy. We redefine the improvement factor model as a function of the cost of PM, using this concept, we derive the conditions of optimal PM policies and formulate expressions to compute the expected cost rate. Based on this information, the determination of the maintenance policies which minimize the cost rate is examined. Numerical examples for the Weibull distribution case are also given.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2008년도 추계학술대회 및 정기총회
• /
• pp.348-352
• /
• 2008

KJCCS(Korean Joint Command & Control System) is a system that integrate each military tactics C4ISR into JCS(Joint Chiefs of Staff) level. It is established in major CP(Commanding Post) and provides all battlefield situation in real time by sharing that between connection troops. The objective of this study is to suggest a way for the measurement of force improvement effectiveness of KJCCS. C2 model is applied to measure force improvement effectiveness of KJCCS. This study will be also present a requirement logic for C4ISR system acquisition later.

• 한국전기전자재료학회논문지
• /
• 제18권10호
• /
• pp.883-890
• /
• 2005

In this paper, the established model of NBTI (Negative Bias Temperature Instability) mechanism was reviewed. Based on this mechanism, then, the influence of nitrogen was discussed among other processes. A constant concentration of nitrogen exists inside $SiO_2$ in order to prevent boron from diffusing and to increase dielectric constant. It was shown that NBTI improvement was achieved by controlling nitrogen profile. It was supposed that the existence of low activation energy of Si-N bonds at $Si-SiO_2$ interface attributes the improvement by making hydrogen prevent interface traps. It was also shown that improvement of NBTI can be achieved by more effective control of nitrogen profile. It was supposed that the maximum control of nitrogen profile can be achieved by DPN (Decoupled Plasma Nitridation) process.

• 한국정보시스템학회지:정보시스템연구
• /
• 제10권2호
• /
• pp.129-150
• /
• 2001

In this study, we model a decentralized supply chain system which is managed by four types of centers, sequentially located: Retailer, Wholesaler, Distributor, and Factory Each center contributes to enhancing the performance of the supply chain system individually with its own local inventory information. Through experiments which are performed with a programmed simulation (like the MIT beer game), we investigate how the information lead time improvement in each center affects the whole system. And we show that the impact of the lead time improvement in the downstream, like retailers, affects more to the system than the one in the upstream, like factories, in a cost-effective way. Moreover, by using information lead time for each center, we analyze how much the extent of the improvement affects the whole system, especially for the total cost and the order level.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.1315-1323
• /
• 2008

This paper defines the Safety Management System(SMS) based on the rail safety act and surveys the status of the English rail SMS and International Civil Aviation Organization (ICAO) SMS and OHSAS18001 SMS. Through the investigation of establishment and implementation status of domestic rail operators' SMS, the improvement directions of the current rail SMS are developed. First, to establish the continual improvement system for SMS, the guide which describe detailed continual improvement method for each steps of SMS including management review by CEO shall be established and implemented. Second, to settle the SMS based on the risk management, it is necessary to endeavor for converting the rail operators mind and to establish the supply system of operating model and basic data and to define the requirement precisely and to include in the related guide for the risk management.

• 경영과학
• /
• 제24권1호
• /
• pp.147-160
• /
• 2007

Six Sigma's concept has long been used as an effective way of restructuring the management process of a firm. In literature regarding Six Sigma, a number of successful cases were reported, where Six Sigma based management activities could enhance firm's strategic performance dramatically for year. However, there exist very few researches investigating the effect of Six Sigma on process innovation and quality improvement. Therefore this study propose a research model testing whether Six Sigma innovation could improve process innovation and quality improvement by industrial classification. We collected 332 valid questionnaires from expert in Six Sigma activities, and applied PLS. Empirical results showed that Six Sigma activities could contribute to process innovation and quality improvement.

• 대한안전경영과학회지
• /
• 제18권4호
• /
• pp.195-209
• /
• 2016

This research determined priority of quality improvement of public institution's education service by using ASC for importance and applying Topsis, a multi-standard decision-making method simplifying various attributes and scales of evaluation items and deciding the comparative priority for satisfaction and discussed the differences so as to measure the quality of public institution's educational service and examine the priority of education service' quality improvement. This research classified the characteristics of quality improvement. As a result, it's significant to suggest positive direction and method to improve satisfaction and education service's quality from an angle of demander by analyzing educational satisfaction of education service quality of public education institution and effects on the following improvement.

• 동력기계공학회지
• /
• 제19권2호
• /
• pp.84-89
• /
• 2015

The occurrence of algae caused by eutrophication of fresh water is a pollution source to destroy the aquatic environment. When the high voltage electric field is applied in the water, When a high voltage is applied to the electric field in the water, the algae can be broken the balance of cell membranes, and is dead. In this paper, we develop a water quality improvement system for generating an electric field having a higher energy than the zeta potential when a high voltage is applied to 4,000V. To ensure the mobility of the water quality improvement system, we designed the PV generation system using the optimal size technique that is based on the model of power lack ratio. By evaluating the output characteristics of the water quality improvement system, power generation characteristics of the PV generation system, and battery charging characteristics, we can show that the proposed system can be applicable to the water quality improvement system inhibiting the growth rate of the algae in the fresh water.

• 농촌계획
• /
• 제24권1호
• /
• pp.61-66
• /
• 2018

The purpose of this study is to identify the factors related to the heavy rain damage and to identify effect of repair and improvement for irrigation facilities on heavy rain damages. The results of the analysis are as follows. First, the imbalance of precipitation became worse over time from using the coefficient of variation. Second, the analysis using Spearman correlation coefficient shows positive relationship between heavy rain damage amount and precipitation amount, and negative correlation between heavy rain damage amount and repair and improvement for irrigation facilities cost. Third, the analysis of the panel regression model shows that the negative impact of the repair and improvement for irrigation facilities cost on the heavy rain damage, which means that the increase of the repair and improvement for irrigation facilities cost can reduce the heavy rain damage.

• 한국기계가공학회지
• /
• 제21권3호
• /
• pp.70-76
• /
• 2022

Recently, the demand for ultra-precision processing has increased owing to the increase in the demand for high-performance ultra-precision optical parts in the fields of information technology (IT), bio, healthcare, aerospace, and future automobiles. In this study, a performance improvement of a multi-stage pump was achieved by improving the pump casing structure rather than using the existing performance improvement method. To verify the performance improvement, the CFD analysis reliability of the existing pump, Pump A, was verified using the FLUENT app in the analysis software ANSYS, and the pump casing was improved through the verified CFD analysis of Pump B. Therefore, we want to analyze the performance improvement.