• 대한산업공학회지
• /
• 제36권2호
• /
• pp.87-93
• /
• 2010

The partial least squares (PLS) method is popularly used for estimating the structural equation model, but the existing algorithm may not be directly implemented when probabilities are involved in some constructs or manifest variables. We propose a structural equation model including the brand choice as one construct having brand choice probabilities as its manifest variables. Then, we develop a PLS-based algorithm for the structural equation model by utilizing the multinomial logit model. A case is introduced as an application and simulation studies are performed to validate the proposed algorithm.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.280-285
• /
• 2000

A viscoelastic constitutive equation of rubber that is under small oscillatory load superimposed on large static deformation is proposed. The proposed model is derived through linearization of Simo's viscoelastic constitutive model and reference configuration transformation. The proposed constitutive equation is extended to a generalized viscoelastic constitutive equation that includes widely used Mormin's model as a special case using objective stress increment. Static deformation correction factor is introduced to consider the influence of Pre-strain on the relaxation function. The proposed constitutive model is tested fer dynamic behavior of rubber specimens with different carbon black contents. It is concluded from the test that the viscoelastic constitutive equation for filled rubber must include the influence of the static deformation on the time effects. The suggested constitutive equation with static deformation correction factor shows good agreement with test values.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
• /
• pp.308-312
• /
• 1999

Developed the model equations which calculate roll force, roll power during hot rolling in real time. The variables which mainly effect on the roll force, roll power are shape factor, reduction, roll diameter, roll velocity, strip inlet temperature, carbon content of strip and strip-roll contact friction coefficient. Among these variables roll diameter, roll velocity, inlet temperature, carbon content and friction coefficient can be excluded in interpolated model equation by introducing equation of die force(F'), power(p') of the frictionless uniform plane strain compression which can be calculated without iteration. At the case of coulomb friction coefficient of 0.3, we evaluated coefficient of polynomial equations of {{{{ { F} over {F' } }}}}, {{{{ { Pf} over {Pd }, { Pd} over {P' } }}}} from the result of finite element analysis using interpolation. It was found that the change of values of {{{{ { F} over {F' }, { P} over {P' } }}}} with the friction coefficient tend to straight line which slope depend only on shape factor. With these properties, developed model equations could be extended to other values of coulomb friction coefficient. To verify developed roll force, roll power model equation we compared the results from these model equation with the results from these model equation with the results from finite element analysis in factory process condition.

• 한국관개배수논문집
• /
• 제14권1호
• /
• pp.41-49
• /
• 2007

In this study, Kajiyama equation and SWAT model were used to estimate the available water resources from 1967 to 2003 at the small scale watershed, located in Dongnae-Myeon, Chunchen, Gangwon. The annual average streamflow for dry years estimated using the Kajiyama equation and the SWAT model were $2,593,779m^3$ and $2,579,162m^3$. The annual average streamflow for wet years were $7,223,804m^3$ and $7,035,253m^3$, respectively. The annual arrange streamflow for the entire 36 year period were $14,868,601m^3$ and $14,214,292m^3$, respectively. The coefficient of determination ($R^2$) and the Nash-Sutcliffe coefficient for comparison between Kajiyama and SWAT were 0.90 and 0.79, respectively. The comparison indicates that the Kajiyama equation and the SWAT model can be used to estimate the streamflow at th study watershed with reasonable accuracy, although the estimated values were not compared with measured streamflow data, which is not available at the small scale study watershed. However, the Kajiyama equation is recommended for estimating available water resources at Dongnae-Myeon watershed because of its ease-of-use and reasonable accuracy compared with the SWAT model, requiring numerous model input and expensive GIS software in operating the model

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 제5회 압연심포지엄 신 시장 개척을 위한 압연기술
• /
• pp.145-152
• /
• 2004

The flow stress value was calculated by comparing predicted and measured roll force. Using basic on-line roll force model and logged mill data the flow stress equation of high strength steel for automobile was derived. The flow stress equation consists of the flow stress equation of carbon steel and flow stress factor calculated by neural network with input parameters not only carbon contents, strip temperature, strain, and strain rate, but also compositions such as Mn, p, Ti, Nb, and Mo. Using the flow stress equation and basic roll force model, precision roll force model of high strength steel for automobile was derived. Using test set of logged mill data the flow stress equation was verified.

• Journal of information and communication convergence engineering
• /
• 제7권3호
• /
• pp.361-365
• /
• 2009

This paper has been presented the transport characteristics of FinFET using the analytical potential model based on the Poisson's equation in subthreshold and threshold region. The threshold voltage is the most important factor of device design since threshold voltage decides ON/OFF of transistor. We have investigated the variations of threshold voltage and drain induced barrier lowing according to the variation of geometry such as the length, width and thickness of channel. The analytical potential model derived from the three dimensional Poisson's equation has been used since the channel electrostatics under threshold and subthreshold region is governed by the Poisson's equation. The appropriate boundary conditions for source/drain and gates has been also used to solve analytically the three dimensional Poisson's equation. Since the model is validated by comparing with the three dimensional numerical simulation, the subthreshold current is derived from this potential model. The threshold voltage is obtained from calculating the front gate bias when the drain current is $10^{-6}A$.

• 공업화학
• /
• 제29권6호
• /
• pp.789-798
• /
• 2018

고분자전해질 연료전지(PEMFC)의 성능을 예측할 수 있는 empirical equation의 역할이 중요하게 대두되고 있다. 본 연구에서는 polarization curve에서 activation loss, ohmic loss, mass transfer loss 영역을 분리하였고, 현재까지 개발된 model 중 Kim의 model과 Hao의 model을 선정하여 각 영역의 fitting을 시행하였다. 온도, 압력, 산소 농도 및 막 두께를 운전변수로 설정하여 조건 변화에 대한 각 loss의 변화를 비교하였다. 기존 model은 전반적으로 좋은 fitting 정확도를 보였지만, 분리된 loss 영역에서는 부정확한 fitting 결과를 보이기도 하였다. 연료전지 성능 예측의 정확도를 개선하기 위하여 converge coefficient를 도입한 새로운 model을 제안하였다. 본 연구에서 제안한 model을 연료전지 성능 예측에 적용한 경우에 신뢰도 평가에서 개선된 결과를 얻을 수 있었다.

• Journal of Information Display
• /
• 제10권3호
• /
• pp.101-106
• /
• 2009

In this study, a physical OLED analog behavior model for SPICE simulation was described using the Verilog-A language. The model was presented through theoretical equations for the J-V characteristics of OLED derived according to the internalcarrier emission equation based on a diffusion model at the Schottky barrier contact, and the mobility equation based on the Pool-Frenkel model. The accuracy of this model was examined by comparing it with the results of the device simulation that was conducted.

• 대한기계학회논문집
• /
• 제7권4호
• /
• pp.451-460
• /
• 1983

Computational four-equation turbulence model is developed and is applied to predict twodimensional unsteady thermal surface discharge into a reservoir. Turbulent stresses and heat fluxes in the momentum and energy equations are determined from transport equations for the turbulent kinetic energy (R), isotropic rate of kinetic energy dissipation (.epsilon.), mean square temperature variance (theta. over bar $^{2}$), and rate of destruction of the temperature variance (.epsilon. $_{\theta}$). Computational results by four-equation model are favorably compared with those obtained by an extended two-equation model. Added advantage of the four-equation model is that it yields quantitative information about the ratio between the velocity time scale and the thermal time scale and more detailed information about turbulent structure. Predicted time scale ratio is within experimental observations by others. Although the mean velocity and temperature fields are similarly predicted by both models, it is found that the four-equation model is preferably candidate for prediction of highly buoyant turbulent flows.

• 농업과학연구
• /
• 제38권3호
• /
• pp.571-581
• /
• 2011

This study develops a mid-term preceding observation model of radish to complement an existing short-term agricultural observation model. The first purpose of the study is to extend a three seasonal classification(spring, summer, fall) of fruit-vegetables to a four seasonal classification that involves the winter additionally. This allows us to verify the reason for demand and supply unbalance and unstable price of radish. The second purpose is to construct a mid-term preceding observation model that would be used to forecast planted areas, output, monthly shipment and price. To achieve these purposes, several multiple regression models are estimated. A system is consisted of a planted areas equation, a yield equation, monthly shipment distribution equation, and monthly price equation. To calculate output an auxiliary equation is involved in the system and the consumer price index etc are considered as exogenous variables.