• 제목/요약/키워드: Model Builder

검색결과 69건 처리시간 0.024초

개체군 체장자료를 이용한 연령조성 추정 (Inference of Age Compositions in a Sample of Fish from Fish Length Data)

  • 김규한;현상윤;서영일
    • 한국수산과학회지
    • /
    • 제51권1호
    • /
    • pp.79-90
    • /
    • 2018
  • Fish ages are critical information in fish stock assessments because they are required for age-structure models such as virtual population analysis and stochastic catch-at-age models, whose outputs include recruitment strengths, a spawning stock size (abundance or biomass), and the projection of a fish population size in future. However, most countries other than the developed countries have not identified ages of fish caught by fisheries or surveys in a consistent manner for a long time (e.g.,>20 years). Instead, data about fish body sizes (e.g., lengths) have been well available because of ease of measurement. To infer age compositions of fish in a target group using fish length data, we intended to improve the length frequency analysis (LFA), which Schnute and Fournier had introduced in 1980. Our study was different in two ways from the Schnute and Fournier's method. First we calculated not only point estimates of age compositions but also the uncertainty in those estimates. Second, we modified LFA based on the von Bertalanffy growth model (vB-based model) to allow both individual-to-individual and cohort-to-cohort variability in estimates of parameters in the vB-based model. For illustration, we used data about lengths of Korean mackerel Scomber japonicas caught by purse-seine fisheries from 2000-2016.

북극권 에너지 자원개발 활동을 위한 입지 적합도 평가 모델 개발 (Development of a Site Suitability Evaluation Model For Arctic-Circle Energy Resource Construction)

  • 김세원;최현준;양병윤;김영석
    • 한국지반신소재학회논문집
    • /
    • 제22권3호
    • /
    • pp.105-117
    • /
    • 2023
  • 최근 글로벌 에너지 공급 위기로 인해 국제 에너지 시장에서 불확실성이 증가되고 있다. 이러한 시장 변화로 에너지 가격이 상승하고 있으며, 미개발된 에너지 자원이 풍부하게 저장된 극한지(북극권)까지 개발 대상 지역이 확대되고 있다. 북극권은 기존 에너지 플랜트 사업을 수행하던 지역과 차별되는 자연환경, 법, 제도, 문화, 이해관계자 등 특수한 건설 환경을 가지고 있기 때문에 사전에 개발지역에 대한 다양한 검토가 필요하다. 본 논문에서는 최근 비전통 에너지 자원개발이 활발히 이루어지고 있는 캐나다 앨버타(Alberta)주를 대상으로 건설 환경 관련 공간정보를 수집하고 구축하였다. 또한, 건설 환경 공간정보 데이터를 활용하여 자원개발을 위한 최적 입지 평가 모델을 개발하고, 기존 자원개발 지역과 비교·분석하여 신뢰도를 검증하였다.

세척계에서 A형 Zeotite의 효과 -오염성분과의 관계를 중심으로- (Behavior of Zeolite Type A as a Detergent Builder -Correlating the Characteristics of Soils-)

  • 김성련;김천희
    • 한국의류학회지
    • /
    • 제10권2호
    • /
    • pp.69-77
    • /
    • 1986
  • A study was made of the effect of zeolite in detergent on the removal of soils correlating the characteristics of soil components. The detergency of natural soil was increased with increasing zeolite concentration but the effect on detergency was inferior to STPP. In case of carbon black based artificial soils. The detergency of soil containning non-polar oily soil was not improved by zeolite but the detergancy was increased with increasing zeolite concentration when polar oily soils were added to the soil. In case of iron black based artificial soils. Though the detergency was better than that of carbon black based soils, the detergency was not improved by zeolite regardless of oily soil components. The effect of zeolite on removal of oily soil was studied with tripalmitin and palmitic acid as model soils. The effect of zeolite and STPP on the removal of tripalmitin, the detergency was increased with in creasing STPP concentration but not zeolite.

  • PDF

CFD 해석을 이용한 실내 온도 최적 측정 위치 선정 방법 (Optimal Measuring Point Selection Method of Indoor Temperature using CFD Analysis)

  • 이민구;정경권
    • 한국정보통신학회논문지
    • /
    • 제16권7호
    • /
    • pp.1559-1566
    • /
    • 2012
  • 본 논문에서는 실거주 환경과 같이 구축된 테스트베드에 온도 센서를 설치하여 최적의 온도 측정 위치를 설정하는 방법을 제안한다. 테스트베드를 CFD(Computational Fluid Dynamics) 방법으로 온도 변화를 시뮬레이션하고, 온도 변화와 기류 변화를 확인하여 최적 온도 측정 위치를 선정한다. 디자인빌더 소프트웨어를 이용하여 테스트베드를 3차원 모델링을 하고 CFD를 실행하였다. 최적위치는 바닥에서 높이 1.5m이고, 온도 변화가 적은 곳을 선택하였다. 실제 공간에 30개의 온습도센서를 설치하여 실험을 진행하였고 온도변화 결과를 확인하였다.

모바일 서비스의 진화와 성공적인 모바일 콘텐츠 모델 (Advancement in Mobile Service and Successful Model for Mobile Contents)

  • 서병문
    • 한국산업정보학회논문지
    • /
    • 제13권4호
    • /
    • pp.24-34
    • /
    • 2008
  • 이 연구는 모바일 비즈니스의 진화과정과 환경변화를 다각적이고 복합적으로 분석하여 향후 모바일콘텐츠 비즈니스의 진화방향을 예측함과 동시에 성공적인 전략을 도출하는데 그 목적이 있다. 결론적으로 모바일콘텐츠(MC) 비즈니스 모델은 세대를 거듭해가면서 영역이 확대되고, 그에 따른 사업자의 진출도 늘어남에 따라 복합적이고 다각적으로 변해 가면서 새로운 비즈니스 전략과제를 제시하고 있는데, 첫째, 고객접근성을 강화해야 하며, 둘째, 감성적으로 접근해야 하며, 개방적인 비즈니스 모델이 필요하다. 넷째, 소비자의 니즈를 반영한 콘텐츠의 기획 및 제작이 필요하며, 다섯째, 모바일플랫폼 선도형 콘텐츠군의 개발과 CP의 비즈니스모델 다양화가 요구된다. 산업정책 차원에서는 모바일콘텐츠 산업의 지속적인 발전을 위해서 단기적이고 단면적인 정책이 아닌, 지속가능한 미래 지향적인 정책이 마련되어야 한다. 건전하고 활기찬 모바일콘텐츠 생태계 조성을 위해서 정부와 규제기구는 모바일콘텐츠 시장의 주도자이기보다는 환경 조성자 역할에 충실하는 것이 바람직하다. 즉, 시장의 원활한 작동을 위한 기본적인 제도와 질서를 형성하고 관리하는데 주력해야 할 것이다.

  • PDF

Accuracy of Bite Registration Using Intraoral Scanner Based on Data Trimming Strategy for Fremitus Teeth

  • Jeong, Yuwon;Shim, June-Sung;Kim, Jee-Hwan;Kim, Jong-Eun;Lee, Hyeonjong
    • Journal of Korean Dental Science
    • /
    • 제15권1호
    • /
    • pp.61-67
    • /
    • 2022
  • Purpose: This study aimed to evaluate the accuracy of bite registration using intraoral scanner based on data trimming strategy for fremitus teeth. Materials and Methods: A reference model was designed by Medit Model Builder software (MEDIT Corp., Seoul). Tooth number 24 and 25 were separated as dies and tooth number 26 was prepared for full-coverage crown. Those were printed using a 3D printer (NextDent 5100). The scanning procedure was performed by a single trained operator with one intraoral scanner (i700; MEDIT Corp.). The scanning groups were divided as follows: group 1 (G1), no fremitus; group 2 (G2), 0.5 mm buccal fremitus in the maxillary left first and second premolar; and group 3 (G3), 1.5 mm buccal fremitus in the maxillary left first and second premolar. Each group was scanned 10 times and were analyzed using the reference model data. Surface-based occlusal clearance was analyzed at the prepared tooth to evaluate accuracy. Result: Mean values of control group (G1) were 1.587±0.021 mm. G2 showed similar values to those from the control group (1.580±0.024 mm before trimming strategy and 1.588±0.052 mm after trimming strategy). G3 showed significantly greater values (1.627±0.025 mm before trimming strategy and 1.590±0.024 mm after trimming strategy) and the differences were found between trimming strategy (P=0.004). Conclusion: Bite trimming strategy for fremitus teeth is a reliable technique to reduce inaccuracies caused by the mobility at maximum intercuspation.

인터넷 상에서의 동적인 협업 환경의 지원을 위한 소프트웨어 구조 (A Software Architecture for Supporting Dynamic Collaboration Environment on the Internet)

  • 이장호
    • 한국정보과학회논문지:컴퓨팅의 실제 및 레터
    • /
    • 제9권2호
    • /
    • pp.146-157
    • /
    • 2003
  • 인터넷 기반의 과학 연구 협업 환경은, 구현 경험에 의하면, 사용자가 확장할 수 있어야 하고 작업 공간에 도구 및 객체들을 동적으로 추가할 수 있어야 하고, 작업을 개인 작업 공간과 공유 작업 공간사이에서 이동할 수 있어야 하며, 인터넷 상에서 쉽게 접근이 가능해야 한다. 본 논문에서는 그러한 요구사항을 만족시키기 위한, Collaboratory Builder's Environment(CBE) 라고 불리는, 협업 환경을 구축하기 위한 개발 환경의 소프트웨어적 구조를 제시한다. CBE는 협업 환경을 협력적인 애플릿(collaborative applet)들로 구성함으로써, 사용자 확장성을 제공한다. 공유 작업 공간의 동적인 재구성의 지원을 위해, CBE는 애플릿, 사용자 및 임의의 데이터 객체를 포함할 수 있는 룸(room)이라는 은유적인 개념을 사용한다. 룸은 지속성을 지원함으로써, 동기적인 협업뿐만 아니라 비동기적인 협업도 지원할 수 있다. 인터넷 상에서의 접근을 위해, 룸의 구성원들은 적절한 권한의 역할(role)을 가진다. 제시된 모델의 프로토타입은 Java로 구현되었으며 Java를 지원하는 웹 브라우저를 이용하여 실행할 수 있다. 구현된 시스템은 4일간 진행된 과학적 협업 활동에서 전 세계의 79명의 우주과학자들을 포함한 95명의 사용자들에 의해 사용되었다. 그 협업 활동의 사용 분석도 제시한다.

건설분야 BPR 수행을 위한 프로세스 모형화 기법 연구 (A Study of Process Modeling Method for Construction Business Process Reengineering)

  • 곽중민;박서영;강인석
    • 한국건설관리학회논문집
    • /
    • 제11권3호
    • /
    • pp.80-88
    • /
    • 2010
  • 국내외 건설분야에서는 건설CALS 구축 등의 건설정보화를 위해 다양한 노력을 기울여 오고 있다. 이러한 건설정보화는 전산시스템 구축 자체에 많은 비중을 두고 있는 반면, 건설업무의 업무프로세스 재설계 등의 분야는 다소 미흡한 실정이다. 이를 위해서는 건설업무 절차구성을 위한 체계화된 프로세스 개념을 도입한 전산화 방법론 및 특화된 프로세스 모형화기법이 요구되고 있다. 본 연구에서는 이러한 BPR의 건설분야 적용성 확보 및 정보화기술과의 연계성을 고려하여 체계적인 건설업무 프로세스의 구축을 위한 건설업무 BPR 방법론과 업무프로세스 모형화기법을 제시한다. 또한 제시된 모형화기법은 웹기반의 프로세스 모형화시스템으로 개발하여 실제 프로젝트의 적용을 통해 활용성을 검증한다.

유방암 환자의 Field-in-Field Technique 치료 시 호흡의 움직임에 따른 선량 평가 (Evaluation of the Dose According to the Movement of Breath During Field-in-Field Technique Treatment of Breast Cancer Patients)

  • 권경태
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제41권6호
    • /
    • pp.561-566
    • /
    • 2018
  • Field-in-Field Technique is applied to the radiation therapy of breast cancer patients, and it is possible to compensate the difference in breast thickness and deliver uniform dose in the breast. However, there are several fields in the treatment field that result in a more complex dose delivery than a single field dose delivery. If the patient's respiration is irregular during the delivery of the dose by several fields and the change of respiration occurs, the dose distribution in the breast changes. Therefore, based on the computed tomography images of breast cancer patients, a human model was created by using a 3D printer (Builder Extreme 1000) to describe the volume in the same manner. A computerized tomography (CT) of the human body model was performed and a treatment plan of 260 cGy / fx was established using a 6-MV field-in-field technique using a computerized treatment planning system (Eclipse 13.6, Varian, USA). The distribution of the dose in the breast according to the change of the respiration was measured using a moving phantom at 0.1 cm, 0.3 cm, 0.5 cm amplitude, using a MOSOXIDE Silicon Field Effect Transistor (MOSFET, Best Medical, Canada) Were measured and compared. The distribution of dose in the breast according to the change of respiration showed similar value within ${\pm}2%$ in the movement up to 0.3 cm compared to the treatment plan. In this experiment, we found that the dose distribution in the breast due to the change of respiration when the change of respiration was increased was not much different from the treatment plan.

GIS를 활용한 해양활동공간 중첩구역 산출 자동화 모형개발 (Development of an Automated Model for Selecting Overlapping Areas of Marine Activity Zone using GIS)

  • 김범규;박용길;최현우;김태훈
    • 한국지리정보학회지
    • /
    • 제25권3호
    • /
    • pp.59-73
    • /
    • 2022
  • 현재 해양은 이용과 보전간의 갈등이 심화되고 있어 이를 해양공간의 핵심가치별로 사전에 정의하여 관리하는 실효적인 방법의 도입이 필수적이다. 이에 해양공간계획을 통해 해양을 9개의 용도구역으로 구획하여 관리하도록 하고 있지만 대상 해양공간에서 상호 배타적인 활동이 중첩되는 공간에 대한 분석은 미흡한 실정이다. 이에 본 연구에서는 해양의 핵심가치가 상충되는 공간을 도출하기 위한 자동화 모형을 개발하였다. 해양활동을 분석하기 위해 가용 가능한 해양활동 자료를 수집하고 이중 상호배타적인 해양활동의 분석에 필요한 항목을 도출하였다. 도출된 항목을 법정구역과 특성구역으로 분류한 후 중첩이 발생할 시 우선순위를 지정하기 위해 항목간의 쌍대비교를 통한 상충분석표를 제작하였다. 지정된 우선순위를 바탕으로 자동화 모델을 개발하여 해양의 활동이 상충되는 해역을 도출하여 가시화하고 상충되는 면적을 산출하였다. 이를 활용하여 해양공간계획을 수립함에 있어 주요 이슈가 발생하는 해역을 명확하게 도출하여 의사결정의 효율성을 높일 수 있을 것이라 판단된다.