• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.8
• /
• pp.748-755
• /
• 2012

Friction causes self-excited vibration, stick-slip vibration and any other friction-induced phenomena. That kinds of vibrations cause chatter and squeal. In order to predict such vibrations accurately, employing an accurate friction model is very important because a dynamic behavior of a system with friction is dominantly governed by a friction model. A Coulomb friction model is the most widely known model. Coulomb friction model is useful model to obtain analytical solutions of the system with friction and the model gives relatively good simulation result. However, defining a friction force at a stick state in simulation is hard because of the characteristic itself and a Coulomb friction model is discontinuous function between a static and a dynamic friction coefficient. Therefore, applying the Coulomb friction model to a simulation is not appropriate. In order to resolve these problems, an approximated Coulomb friction model was developed using simple and continuous function. However, an approximated Coulomb friction model cannot realize stick. Therefore, an approximated Coulomb friction model cannot describe friction phenomena accurately. In order to analyze a friction phenomenon accurately, a friction model for a simulation was proposed in this paper. A proposed friction model realizes stick and gives reasonably good results compared to results obtained by the simulation employing an approximated Coulomb friction model. Accuracy of a proposed friction model was verified by comparing experimental results.

• The Research Journal of the Costume Culture
• /
• v.24 no.1
• /
• pp.93-106
• /
• 2016

Study objectives are: 1) to investigate the difference in consumer perceptions of the model's image and physical attractiveness according to advertising model types; 2) to explore the effect of the difference between the model's image and the consumer's self image, the difference between the model's image and the brand's image, and the physical attractiveness of the model on attitude toward the advertising model; and 3) to explore the effect of attitude toward the advertising model on attitude toward the advertisement. A total of 306 female consumers over the age of 45 participated in experiments with advertisement stimuli for a senior apparel brand. Results showed a significant difference in the model's images and physical attractiveness according to each model type. The consumer's attitude toward the advertising model was determined by physical attractiveness of the model, not by the difference between model's image and the consumers' self-image, nor by the difference between the model's image and brand image. Attitude toward advertisements was determined by attitude toward the advertising model. The findings imply that advertising models of a senior apparel brand can be selected based on the physical attractiveness of the model. Consumers do not consider whether the model's image fits well with their self-images or the brand's image when building an attitude toward the advertising model, and this precedes the consumer's attitude toward the advertisement. These results can be used as guidelines to select appropriate models for advertisements of senior apparel brands.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.49 no.1
• /
• pp.18-28
• /
• 2013

It was compared the estimated parameters by the surplus production from three different models, i.e., three types (Schaefer, Gulland, and Schnute) of the traditional surplus production models, a stock production model incorporating covariates (ASPIC) model and a maximum entropy (ME) model. We also evaluated the performance of models in the estimation of their parameters. The maximum sustainable yield (MSY) of small yellow croaker (Pseudosciaena polyactis) in Korean waters ranged from 35,061 metric tons (mt) by Gulland model to 44,844mt by ME model, and fishing effort at MSY ($f_{MSY}$) ranged from 262,188hauls by Schnute model to 355,200hauls by ME model. The lowest root mean square error (RMSE) for small yellow croaker was obtained from the Gulland surplus production model, while the highest RMSE was from Schnute model. However, the highest coefficient of determination ($R^2$) was from the ME model, but the ASPIC model yielded the lowest coefficient. On the other hand, the MSY of Kapenta (Limnothrissa miodon) ranged from 16,880 mt by ASPIC model to 25,373mt by ME model, and $f_{MSY}$, from 94,580hauls by ASPIC model to 225,490hauls by Schnute model. In this case, both the lowest root mean square error (RMSE) and the highest coefficient of determination ($R^2$) were obtained from the ME model, which showed relatively better fits of data to the model, indicating that the ME model is statistically more stable and robust than other models. Moreover, the ME model could provide additional ecologically useful parameters such as, biomass at MSY ($B_{MSY}$), carrying capacity of the population (K), catchability coefficient (q) and the intrinsic rate of population growth (r).

• Journal of the Korea Convergence Society
• /
• v.12 no.1
• /
• pp.199-204
• /
• 2021

In this study, the configurations of the two engine exhaust manifolds were designed. And the strengths and durabilities were analyzed through the structural analysis and natural frequency analyses of these models. As the result of structural analysis, the strength of model A is much better than that of model B because the maximum stress and deformation of model B are considerably greater than those of model A by more than 9 and 39 times, respectively. It can also be confirmed that model A has the durability better than model B because the maximum frequency of model A is greater than the natural frequency of model B and its maximum deformation is smaller than model B. The result of this study can be used to investigate the durability due to the exhaust manifold shape of medium-sized car without actual test. It also seems to be helpful in the aesthetic convergent design of small car muffler.

• Journal of Advanced Marine Engineering and Technology
• /
• v.27 no.5
• /
• pp.609-616
• /
• 2003

The purpose of this study is to design the adaptive speed control system of a marine diesel engine by combining the Model Matching Method and the Nominal Model Tracking Method. The authors proposed already a new method to determine efficiently the PID control Parameters by the Model Matching Method. typically taking a marine diesel engine as a non-oscillatory second-order system. But. actually it is very difficult to find out the exact model of a diesel engine. Therefore, when diesel engine model and actual diesel engine are unmatched as an another approach to promote the speed control characteristics of a marine diesel engine, this paper Proposes a Model Reference Adaptive Speed Control system of a diesel engine, in which PID control system for the model of a diesel engine is adopted as the nominal model and Fuzzy controller and derivative operator are adopted as the adaptive controller.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.805-810
• /
• 2004

The model is verified thorough simulations and experiments. And then the developed model is applied to a half car model and automobile vibrations are analyzed. The effects of tire design parameters on the automobile vibration energy are investigated. The results from laboratory and field tests confirm the validity of the analytical model. The 17-DOF half-car model is built to analyze the automobile vibration. The characteristics of the nonlinear model for a shock absorber are applied to this model. The results from the present 17-DOF half car model incorporating the analytical tire model with tire design parameters, are compared with a 5-DOF half car model where the tire is modeled with linear springs. The results of the 17-DOF model are closed to experimental results. Using the 17-DOF model, the influences of tire design parameter are considered. According to the results of analyses, the vibrations at seat/body/wheel are predicted by simulation and experiment.

• 한국지구과학회:학술대회논문집
• /
• 2005.09a
• /
• pp.254-262
• /
• 2005

본 연구에서는 중학교 과학 영재아들이 가지고 있는 조석에 관한 정신모형을 탐색하기 위하여 상황에 따른 개념 유형을 분류하고, 각 유형들을 구성하는 국면들을 분석하였다. 조석 현상에 관해 두 가지 상황으로 구성된 과제 수행을 실시한 후 그 응답 결과를 분석한 결과, 상당수의 학생들이 상황에 따라 서로 다른 개념 유형을 나타내었다. 상황에 따른 개념 유형들을 구성하고 있는 국면을 분석한 결과, 각 유형들은 내용-일반적 국면을 공통적으로 포함하고 있었으나, 내용-특정적 국면과 전략적 국면에서는 많은 차이를 나타내었다. 두 가지 상황에서 나타나는 개념 유형들과 이들 유형을 구성하는 국면들을 조합하여 학생들의 정신모형을 분석한 결과 다음과 같은 4가지 모형으로 나눌 수 있었다: (1) Tide model (2) Force model (3) Phase model (4) Hybrid model. Tide model은 과학적으로 옳은 모형이며, Force model과 Phase model은 옳지 않은 모형이며, Hybrid model은 혼합 모형으로 상황에 따라 나타나는 개념 유형이 서로 부합되지 않는 모형이다. 중학교 과학 영재아들이 조석 현상에 대해 가장 많이 가지고 있는 모형은 Tide model(45.0%)이었으며, 그 다음으로는 Hybrid model(30.0%), Force model(12.5%), Phase model(7.5%) 순으로 나타났다.

• 한국전산유체공학회:학술대회논문집
• /
• 2005.10a
• /
• pp.105-110
• /
• 2005

Evaluation of elliptic blending turbulence model (EBM) together with the two-layer model, shear stress transport (SST) model and elliptic relaxation model (V2-F) is performed for a better prediction of thermal stratification in an upper plenum of a liquid metal reactor by applying them to the experiment conducted at JNC. The algebraic flux model is used for treating the turbulent heat flux. There exist much differences between turbulence models in predicting the temporal variation of temperature. The V2-F model and the EBM better predict the steep gradient of temperature at the interface of thermal stratification, and the V2-F model and EBM predict properly the oscillation of temperature. The two-layer model and SST model fail to predict the temporal oscillation of temperature.

• Structural Engineering and Mechanics
• /
• v.18 no.1
• /
• pp.91-112
• /
• 2004

Concrete is a composite material and at meso-level, may be assumed to be composed of three phases: aggregate, mortar-matrix and aggregate-matrix interface. It is postulated herein that although non-linear material parameters are generally used to model this composite structure by finite element method, linear elastic fracture mechanics principles can be used for modelling at the meso level, if the properties of all three phases are known. For this reason, a novel meso-mechanical approach for concrete fracture which uses the composite material model with distributed-phase for elastic properties of phases and considers the size effect according to linear elastic fracture mechanics for strength properties of phases is presented in this paper. Consequently, the developed model needs two parameters such as compressive strength and maximum grain size of concrete. The model is applied to three most popular fracture mechanics approaches for concrete namely the two-parameter model, the effective crack model and the size effect model. It is concluded that the developed model well agrees with considered approaches.

• Korean Management Science Review
• /
• v.14 no.1
• /
• pp.131-149
• /
• 1997

Software cost estimation is an important both for buyers and sellers(developers). We reviewed domestic and foreign researches and practices on software cost estimation with function point method comprehensively, In this paper, we derived four promising alternative function point models. They are an IFPUG(International Function Point User Group)-based model(Model I), a shorthand model for client/sever software systems(Model II), a data-oricnted model for relatively large software projects(Model III), and a general- purpose function point model for non business application softwares as well as business applications(Model IV). Empirical data shows that Model I, II, and IV are very useful function point models. In particular, model II and IV look very useful models since they are concise and accurate. These models can be incorporated in a new improved guideline for software cost estimation. General opinion survey shows that Model I, II and IV are preferable. There are no significant differences in preference between buyers and sellers. The survey also shows that users think function point method is better than step(line of code)-oriented cost estimation methods in many ways including objectivity and estimation accuracy.