Journal of the Korea Convergence Society (한국융합학회논문지)

Korea Convergence Society (한국융합학회)
권호 표지
DOI QR코드

DOI QR Code

A Convergent Study on Durability over the Exhaust Manifold Shape of Medium-sized Car

중형 자동차의 배기매니폴드 형상에 따른 내구성에 관한 융합 연구

  • Choi, Kye-Kwang (Department of Metal Mold Design Engineering, Kongju national University) ;
  • Cho, Jae-Ung (Division of Mechanical & Automotive Engineering, Kongju National University)
  • 최계광 (공주대학교 금형설계공학과) ;
  • 조재웅 (공주대학교 기계자동차공학부)
  • Received : 2020.09.02
  • Accepted : 2021.01.20
  • Published : 2021.01.28
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, the configurations of the two engine exhaust manifolds were designed. And the strengths and durabilities were analyzed through the structural analysis and natural frequency analyses of these models. As the result of structural analysis, the strength of model A is much better than that of model B because the maximum stress and deformation of model B are considerably greater than those of model A by more than 9 and 39 times, respectively. It can also be confirmed that model A has the durability better than model B because the maximum frequency of model A is greater than the natural frequency of model B and its maximum deformation is smaller than model B. The result of this study can be used to investigate the durability due to the exhaust manifold shape of medium-sized car without actual test. It also seems to be helpful in the aesthetic convergent design of small car muffler.

본 연구에서는 엔진 배기 매니폴드 두 가지 모델의 형상을 설계하고 이 모델들에 대한 구조 해석 및 고유진동수 해석을 통하여 강도 및 내구성을 해석하였다. 구조 해석의 결과로서 Model B의 응력과 변형량이 Model A의 최대의 응력과 변형량보다 각각 9배 및 39배 이상으로 상당히 더 크기 때문에 Model A의 강도가 Model B보다 훨씬 더 양호하다고 볼 수 있다. 또한 Model A의 최대 진동수가 Model B의 고유 진동수보다 더 크고 그 최대 변형량은 Model A가 Model B보다 작기 때문에 Model A의 내구성이 Model B보다 더 양호하다는 것을 확인할 수 있다. 본 연구 결과를 이용하면 실제 실험을 하지 않아도 중형 자동차의 배기매니폴드 형상에 따른 내구성을 조사할 수 있다. 또한 소형 자동차의 머플러의 미적인 융합 설계에 도움이 될 수 있다고 보인다.

Keywords

References

  1. J. R. Koo & O. S. Song. (2019). Vibration Analysis of Transmission Line with Stockbridge Dampers. Transactions of the Korean Society for Noise and Vibration Engineering, 29(4), 470-476. DOI : 10.5050/KSNVE.2019.29.4.470
  2. W. B. Lee & H. H. Yoo. (2019). Modeling and Vibration Analysis of an Inward Cantilever Beam Undergoing Translational and Rotational Motion. Transactions of the Korean Society for Noise and Vibration Engineering, 29(1), 107-113. DOI : 10.5050/KSNVE.2019.29.1.107
  3. S. J. Park & B. J. Kim. (2017). Vortex-Induced Vibration Analysis of Deep-Sea Riser. Journal of Ocean Engineering and Technology, 31(5), 364-370 DOI : 10.26748/KSOE.2017.10.31.5.364
  4. D. H. Lee & J. U. Cho. (2018). Convergence Study on Damage of the Bonded Part at TDCB Structure with the Laminate Angle Manufactured with CFRP. Journal of the Korea Convergence Society, 9(12), 175-180. DOI : 10.15207/JKCS.2018.9.12.175
  5. J. H. Lee & J. U. Cho. (2015). Study on the Convergent Life Evaluation due to the Bumper Configuration of Multipurpose Vehicle. Journal of the Korea Convergence Society, 6(5), 85-90. DOI : 10.15207/JKCS.2015.6.5.085
  6. J. U. Cho. (2014). Analytical Study on Durability due to the Load of Artificial Knee Joint. Journal of the Korea Convergence Society, 5(2), 7-11. DOI : 10.15207/JKCS.2014.5.2.007
  7. J. W. Park & J. U. Cho. (2017). Convergence Study on Composite Material of Unidirectional CFRP and SM 45C Sandwich Type that Differs in Stacking Angle. Journal of the Korea Convergence Society, 8(7), 231-236. DOI : 10.15207/JKCS.2017.8.7.231
  8. J. U. Cho. (2015). Study on Convergence Technique through Strength Analysis of Stabilizer Link by Type. Journal of the Korea Convergence Society, 6(1), 57-63. DOI : 10.15207/JKCS.2015.6.1.057
  9. Y. K. Park & B. G. Lee. (2018). A Study on the Structural Analysis of the Spindle of Swiss Turn Type Lathe for Ultra Precision Convergence Machining. Journal of the Korea Convergence Society, 9(5), 145-150. DOI : 10.15207/JKCS.2018.9.5.145
  10. Y. T. Oh. (2017). Study on the Structural Analysis of SCARA Industrial Robot. Journal of the Korean Society of Mechanical Technology, 19(6), 866-871. DOI : 10.17958/ksmt.19.6.201712.866
  11. Y. S. Lee & Y. J. Yang. (2017). Study on Structural Analysis of Variable Roll Unit for Drawing Process of SUS Hexagonal Bar. Journal of the Korean Society of Mechanical Technology, 19(6), 827-833. DOI : 10.17958/ksmt.19.6.201712.827
  12. S. W. Choo & S. H. Jeong. (2017). Structural and Dynamic Characteristic Analysis of a Feeder for an Automatic Assembly System of an LED Convergent Lighting Module. Journal of the Korean Society of Manufacturing Process Engineers, 16(1), 124-133. DOI : 10.14775/ksmpe.2016.16.1.124
  13. J. Y. Kim, K. J. You, J. C. Gao & Y. S. Jung. (2017). A Study on the Structural Analysis of Fiber Guide accept to 4C MM Optical Fiber. Journal of the Korean Society of Manufacturing Process Engineers, 16(6), 75-80. DOI : 10.14775/ksmpe.2017.16.6.075
  14. J. S. Lim. (2019). A Design of Small Size Sensor Data Acquisition and Transmission System. Journal of Convergence for Information Technology, 9(1), 136-141. https://doi.org/10.22156/CS4SMB.2019.9.1.136
  15. K. S. Ahn, J. G. Oh, T. H. Yang & G. T. Yeo. (2019). An analysis of the Factors of Moving in and Activation Strategies for Incheon Cold-Chain Cluster using LNG cold energy. Journal of Digital Convergence, 17(2), 101-111. https://doi.org/10.14400/JDC.2019.17.2.101