• Journal of Mechanical Science and Technology
• /
• v.20 no.9
• /
• pp.1382-1389
• /
• 2006

Dynamic responses of a simply supported beam with a translational spring carrying a moving mass are studied. Governing equations of motion including all the inertia effects of a moving mass are derived by employing the Galerkin's mode summation method, and solved by using the Runge-Kutta integral method. Numerical solutions for dynamic responses of a beam are obtained for various cases by changing parameters of the spring stiffness, the spring position, the mass ratio and the velocity ratio of a moving mass. Some experiments are conducted to verify the numerical results obtained. Experimental results for the dynamic responses of the test beam have a good agreement with numerical ones.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.12
• /
• pp.8654-8664
• /
• 2015

Beam-type structures with non-uniform cross sections are widely used in mechanical, architectural, and civil engineering fields. This paper deals with dynamic characteristics and vibration problems. Governing equations are first derived by using local coordinates. Their solutions are then assumed by using Galerkin's mode summation method. Bisection method is also applied in solving the determinant of the matrix which can provide natural frequencies. Whereas finite element methods adopt admissible functions satisfying only geometric boundary condition, in this study we apply Galerkin's mode summation method which uses eigen-functions satisfying both governing equations and boundary conditions. Modal analysis and experimental tests are finally performed using simply-supported beams with four different non-uniform cross-sections. Our analytical results then show good agreement with experimental ones.

• Journal of the Society of Naval Architects of Korea
• /
• v.49 no.2
• /
• pp.146-150
• /
• 2012

Free vibrations of strings due to initial conditions have been analyzed by the conventional mode summation method, and the nondimensionalized displacements and velocities have been derived in the form of infinite series. The results show wave propagating phenomena and confirmed by experiments using the high speed camera. Other physical characteristics have been discussed and examined with help of waveform solutions.

• Smart Structures and Systems
• /
• v.17 no.1
• /
• pp.59-72
• /
• 2016

The Impact Echo method can be used to measure the thickness of concrete plate like structures. Measurements are based on the identification of a clear thickness resonance frequency which can be difficult in very thick or highly attenuative plates. In this study the detectability of the measured resonant frequency is enhanced by time domain summation of signals with different source receiver spacing. The proposed method is based on the spatial and temporal properties of the first higher symmetric zero group velocity Lamb mode (S1-ZGV) which are described in detail. No application dependent tuning or filtering is needed which makes the method robust and suitable for implementation in automatic IE thickness measurements. The proposed technique is exemplified with numerical data and field data from a thick concrete wall and a highly attenuative asphalt concrete layer.

• Journal of Korean Association for Spatial Structures
• /
• v.13 no.2
• /
• pp.75-82
• /
• 2013

For each cable component in a cable dome structure, pre-tension is needed for stability of whole the structure. The summation of these pre-tension at each joint should be zero to achieve the self equilibrium structure. The first step in cable dome structure analysis is to find the ratio of pre-tension in each member which can produce a stable and structure on self-equilibrium. In this paper, a new method based on the basic principle of closed force polygon for equilibrium system is proposed for the determination of self-equilibrium mode of cable dome structure. A single layer cable dome and two multi layer type domes have been analyzed. The ratios of cable members are determined by the presented method, and check the validation of the results by numerical calculation.

• Journal of the Korean Society of Safety
• /
• v.28 no.5
• /
• pp.21-26
• /
• 2013

Delamination of cover concrete due to re-bar corrosion is a critical damage reducing structural safety of reinforced concrete structures. Therefore, it should be detected and evaluated to provide appropriate maintenance to recover structural integrity. Impact-echo method, which utilizes thickness vibration characteristics of delaminated concrete section, is effective for detection and evaluation of small areal size delamination. However, it may not be applicable for large areal size delamination in which flexural vibration modes are dominated. In this study, applicability of vibration mode shapes of delaminated concrete section is investigated for visualization of delamination region in concrete structures. Numerical and experimental modal tests are performed to estimate mode shapes of delaminated concrete section and linear absolute summation technique is proposed for effective visualization of delamination region based on estimated mode shapes.

• Wind and Structures
• /
• v.19 no.5
• /
• pp.565-583
• /
• 2014

Using synchronous surface pressures from the wind tunnel test, the three dimensional wind load models of high-rise buildings are established. Furthermore, the internal force responses of symmetric high-rise buildings in along-wind, across-wind and torsional directions are evaluated based on mode acceleration method, which expresses the restoring force as the summation of quasi-static force and inertia force components. Accordingly the calculation methods of equivalent static wind loads, in which the contributions of the higher modes can be considered, of symmetric high-rise buildings in along-wind, across-wind and torsional directions are deduced based on internal forces equivalence. Finally the equivalent static wind loads of an actual symmetric high-rise building are obtained by this method, and compared with the along-wind equivalent static wind loads obtained by China National Standard.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.05a
• /
• pp.553-556
• /
• 2000

The paper deals with the dynamic response of non-uniform beams subjected to a moving mass. In the dynamic analysis, the effects of inertia force, elastic force, centrifugal force, Coriolis force and self weight due to moving mass are taken into account. Galerkin's mode summation method is applied for the discretized equations of notion. Numerical results for the dynamic response of the non-uniform beam under a moving mass having various magnitudes and velocities are investigated. Experimental results have a good agrement with predictions

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.10
• /
• pp.946-949
• /
• 2007

This paper discusses the lateral vibration of a beam with boundary condition of one end fixed and the other end free. The uniform beam has a solution by summation of some simple exponential functions. But if its shape is not uniform, its solution could be by Bessel's function or mathematical solution could not exist. Even if the solution of Bessel's function exists, as Bessel function is a series function, we must get the solution by numerical method. Author had proposed the solution of the matrix method by Ritz's method and a new mode shape function, and had earned the good results for a wedge beam. Hereby a vibration analysis for the tapered beam with circle cross section was executed, and so good results were showed.

• Journal of Korean Association for Spatial Structures
• /
• v.12 no.2
• /
• pp.81-88
• /
• 2012

Cable dome structures are composed of cables-masts and the cables should be in pre-tension since a structure without pre-tension is not stable. Under the pretension, self equilibrium stress state is the main characteristic of a cable dome structure. In this paper, a new method based on the basic principle of closed force polygon for equilibrium system is proposed for the determination of self-equilibrium mode of cable dome structure. The proposed method which is called geometric method has the unique characteristic of visualization of the force mode needed for maintenance of self-equilibrium. The basic theory for a self equilibrium of structure is that the summation of forces at each joint without any external load should be zero. The simplicity of the method which involves only drawing close polygon with the aid of suitable CAD software has been illustrated by means of a example. The results compared with mechanical calculation and existed method and shows good agreement.