• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.11 no.4
• /
• pp.216-230
• /
• 1999

A Galerkin finite element model for the analysis of harbor oscillation has been developed based on the extended mild-slope equation. Infinite elements are used to accomodate the radiation condition at infinity and joint elements to treat the matching conditions at the harbor entrance which include the energy loss due to flow separation. The numerical tests for rectangular harbors with fully or partially open entrances show that the energy loss at the harbor entrance considerably reduces the the amplification ratios at the innermost parts of the harbors and that the amplification ratios decrease considerably with increasing incident wave heights and jet lengths at the harbor entrance. Application of the model to the Gamcheon harbor show that when the incident wave amplitude is small the amplification ratios rather increase when the entrance energy loss is included than when ignored because of the shift of the resonance periods. Even though the entrance energy loss was insignificant for the measured long-period incident waves, it would be of great importance if the incident waves were large as in the attack of tsunamis. The resonance period of the Helmholtz mode at the Gamcheon Harbor was calculated to be 31 minutes, which agrees well with the measured one between 27 and 33.3 minutes. The measured resonance periods between 9.4 and 12.1 minutes and 5.2 and 6.2 minutes were also calculated by the numerical model as 10.4 minutes and 6.6 or 5.6 minutes, indicating good performance of the model. On the other hand, it was shown that a variety of oscillation modes exists in the Gamcheon Harbor and lateral resonances of considerable amplification ratios also exist at the periods of 3.6 and 1.6 minutes as in the Young-II Bay.

• Progress in Medical Physics
• /
• v.19 no.1
• /
• pp.42-48
• /
• 2008

Bio-implantable devices such as heart pacers, gastric pacers and drug-delivery systems require power for carrying out their intended functions. These devices are usually powered through a battery implanted with the system or are wired to an external power source. This paper describes an inductive power transmission link, which was developed for an implantable stimulator for direct stimulation of denervated muscles. The carrier frequency is around 1MHz, the transmitter coil has a diameter of 46mm, and the implant coil is 46mm. Data transmission to the implant with amplitude shift keying (ASK) and back to the transmitter with passive telemetry can be added without major design changes. We chose the range of coil spacing (2 to 30mm) to care for lateral misalignment, as it occurs in practical use. If the transmitter coil has a well defined and reliable position in respect to the implant, a smaller working range might be sufficient. Under these conditions the link can be operated in fixed frequency mode, and reaches even higher efficiencies of up to 37%. The link transmits a current of 50 mA over a distance range of 2-15 mm with an efficiency of more than 20% in tracking frequency. The efficiency of the link was optimized with different approaches. A class E transmitter was used to minimize losses of the power stage. The geometry and material of the transmitter coil was optimized for maximum coupling. Phase lock techniques were used to achieve frequency tracking, keeping the transmitter optimally tuned at different coupling conditions caused by coil distance variations.

• Journal of the Korea Convergence Society
• /
• v.8 no.5
• /
• pp.161-167
• /
• 2017

We have fabricated and characterized $32{\times}32$ photonic quantum ring (PQR) laser arrays uniformly operable with $0.98{\mu}A$ per ring at room temperature. The typical threshold current, threshold current density, and threshold voltage are 20 mA, $0.068A/cm^2$, and 1.38 V. The top surface emitting PQR array contains GaAs multiquantum well active regions and exhibits uniform characteristics for a chip of $1.65{\times}1.65mm^2$. The peak power wavelength is $858.8{\pm}0.35nm$, the relative intensity is $0.3{\pm}0.2$, and the linewidth is $0.2{\pm}0.07nm$. We also report the wavelength division multiplexing system experiment using angle-dependent blue shift characteristics of this laser array. This photonic quantum ring laser has angle-dependent multiple-wavelength radial emission characteristics over about 10 nm tuning range generated from array devices. The array exhibits a free space detection as far as 6 m with a function of the distance.

• Molecular & Cellular Toxicology
• /
• v.3 no.2
• /
• pp.107-112
• /
• 2007

o-Nitrotoluene is used to synthesize artificial dyes and raw materials of urethane resin. In this study, we have carried out in vitro genetic toxicity tests and microarray analysis to understand the underlying mechanisms and the mode of action of toxicity of onitrotoluene. TA1535 and TA98 cells were treated with o-nitrotoluene to test its toxicity by basic genetic toxicity test. Ames and two new in vitro micronucleus and COMET assays were applied using CHO cells and L5178Y cells, respectively. In addition, microarray analysis of differentially expressed genes in L5178Y cells in response to o-nitrotoluene was analyzed using Affymatrix genechip. The result of Ames test was that o-nitrotoluene treatment did not increase the mutations both in base substitution strain TA1535 and in frame shift TA98. o-Nitrotoluene has not increased micronuclei in CHO cells. But onitrotoluene increased DNA damage in L5178Y cell. Two-hundred two genes were initially selected as differentially expressed genes in response to o-nitrotoluene by microarray analysis and forty four genes among them were over 2 times of log fold changed. These forty four genes could be candidate biomarkers of genetic toxic action of o-nitrotoluene related to induction of mutation and/or induction of micronuclei and DNA damage. Further confirmation of these candidate markers related to the DNA damage will be useful to understand the detailed mechanism of action of o-nitrotoluene.

• Journal of the Optical Society of Korea
• /
• v.19 no.6
• /
• pp.705-710
• /
• 2015

The fabrication process of thin boron-doped nanocrystalline diamond (B-NCD) microelectrodes on fused silica single mode optical fiber cladding has been investigated. The B-NCD films were deposited on the fibers using Microwave Plasma Assisted Chemical Vapor Deposition (MW PA CVD) at glass substrate temperature of 475 ℃. We have obtained homogenous, continuous and polycrystalline surface morphology with high sp³ content in B-NCD films and mean grain size in the range of 100-250 nm. The films deposited on the glass reference samples exhibit high refractive index (n=2.05 at λ=550 nm) and low extinction coefficient. Furthermore, cyclic voltammograms (CV) were recorded to determine the electrochemical window and reaction reversibility at the B-NCD fiber-based electrode. CV measurements in aqueous media consisting of 5 mM K₃[Fe(CN)₆] in 0.5 M Na₂SO₄ demonstrated a width of the electrochemical window up to 1.03 V and relatively fast kinetics expressed by a redox peak splitting below 500 mV. Moreover, thanks to high-n B-NCD overlay, the coated fibers can be also used for enhancing the sensitivity of long-period gratings (LPGs) induced in the fiber. The LPG is capable of measuring variations in refractive index of the surrounding liquid by tracing the shift in resonance appearing in the transmitted spectrum. Possible combined CV and LPG-based measurements are discussed in this work.

• Ocean and Polar Research
• /
• v.40 no.1
• /
• pp.1-13
• /
• 2018

Previous studies have indicated a great regional difference in Sea Level Rise (SLR) in the Pacific and it has been suggested that this is linked to climate variability over the past two decades. In this study, we seek to identify the possible linkage between regional sea level and Pacific climate variability from altimetry-based sea level data (1993-2012) and further investigate how the Pacific sea level has changed spatially and temporally over the past 60 years from long-term sea level reconstruction data (1953-2008). Based on the same method as Zhang and Church (2012), the Inter-annual Climate Index (ICI) associated with the El $Ni{\tilde{n}}o-Southern$ Oscillation (ENSO) and the Decadal Climate Index (DCI) associated with Pacific Decadal Oscillation (PDO) are defined and then the multiple variable linear regression is used to analyze quantitatively the impact of inter-annual and decadal climate variability on the regional sea levels in the Pacific. During the altimeter period, the ICI that represents ENSO influence on inter-annual time scales strongly impacts in a striking east-west "see-saw mode" on sea levels across the tropical Pacific. On the other hand, the decadal sea level pattern that is linked to the DCI has a broad meridional structure that is roughly symmetric in the equator with its North Pacific expression being similar to the PDO, which largely contributes to a positive SLR trend in the western Pacific and a negative trend in the eastern Pacific over the two most recent decades. Using long-term sea level reconstruction data, we found that the Pacific sea levels have fluctuated in the past over inter-annual and decadal time scales and that strong regional differences are presented. Of particular interest is that the SLR reveals a decadal shift and presents an opposite trend before and after the mid-1980s; i.e., a declining (rising) trend in the western (eastern) Pacific before the mid-1980s, followed by a rising (declining) trend from the mid-1980s onward in the western (eastern) Pacific. This result indicates that the recent SLR patterns revealed from the altimeters have been persistent at least since the mid-1980s.

• Korean Journal of Food Science and Technology
• /
• v.30 no.3
• /
• pp.697-701
• /
• 1998

Two major flavonoid compounds having inhibition activity of xanthine oxidase from onion skin were separated, isolated and identified by ODS chromatography, Sephadex LH-20 chromatography, UV/visible absorption spectroscopy and FAB Mass. Spectral analyses indicated that $F_1$ was a flavonol having 3,5,7,3'-OH and 4'-glucoside (quercetin 4'-glucoside), and $F_2$ was a flavonol having 3(5),7,3',4'-OH (quercetin). FAB-Mass of fraction $F_1\;and\;F_2$ in positive-ion-mode produced a spectra containing main ions at m/z 465, corresponding to the $(M＋H)^+$ ion of quercetin 4'-glucoside, and m/z 303, corresponding to the $(M＋H)^+$ ion of quercetin. The inhibition mechanisms of $F_1\;and\;F_2$ were a mixture of the uncompetative and non-competative modes, with respect to xanthine as a substrate.

• Elastomers and Composites
• /
• v.42 no.1
• /
• pp.47-54
• /
• 2007

Reaction kinetics of polyurethane elastomers (PU) were studied using dynamic DSC and TGA for three PU samples of general purpose (Sample A), high temperature cross-likable CASE purpose with MOCA (Sample B), and RT cross-likable CASE purpose grade (Sample C). From DSC results, sample with MOCA(Sample B) showed lower shift of peak temperature, while showing broader thermograms than those of general purpose grade (Sample A). On the other hand, RT cross-linkable PU grade (Sample C) showed an interesting double mode reaction patterns, i.e., a lower temperature reaction at about $70\;^{\circ}C$, and a higher temperature reaction in the range of $140{\sim}170\;^{\circ}C$, indicating that it requires 2-step reaction process in order to complete the reaction. Once the cross-linking reaction completed, however, TGA results showed that all the samples would be considered to have similar chemical structures, showing similar decomposition processes. Sample C, especially, had showed decomposition properties of both Sample A and Sample B. Formation activation energies calculated from Kissinger method showed 10.39, 65.85, 36.52(Low $T_p$) and 18.21(High $T_p$) kcal/mol, while decomposition activation energies were 31.94, 30.84, 24.16 kcal/mol, respectively.

• Journal of the Society of Disaster Information
• /
• v.14 no.3
• /
• pp.288-295
• /
• 2018

Purpose: The paper aims to compare the effectiveness of the two types of transport demand management measures, namely pull measures and push measures. Method: Case studies of two metropolitan areas in the developing world assess the extent to which increases in fuel prices can contribute to reducing automobile use and increasing the public transport use and the potential of urban rail transit to cause mode shift from automobiles. Within the case studies, a stated response survey of current car users has been conducted for Cairo and an on-line survey of rail transit users in Algiers. Results: There was a major proportion of car drivers who intend to switch to public transport, depending on the range of fuel prices in Cairo and a considerable proportion of rail users who have switched from automobiles resulting in a measurable reduction in CO2 emissions in Algiers. Conclusion: Investments in urban rail can be highly effective where there are demands for better public transport, but this type of pull measures can be much more effective if combined with push measures which significantly raise driving costs.

• Journal of the Korean Vacuum Society
• /
• v.20 no.6
• /
• pp.442-448
• /
• 2011

Self-assembled InAs/InAlGaAs quantum dots (QDs) grown on an InP (001) substrate have been investigated by using photoluminescence (PL) and time-resolved PL measurements. The single layer (QD1) and seven stacks (QD2) of InAs/InAlGaAs QDs grown by the conventional S-K growth mode were used. The PL peak at 10 K was 1,320 nm for both QD1 and QD2. As the temperature increases from 10 to 300 K, the PL peaks for QD1 and QD2 were red-shifted in the amount of 178 and 264 nm, respectively. For QD1, the PL decay increased with increasing emission wavelength from 1,216 to 1,320 nm, reaching a maximum decay time of 1.49 ns at 1,320 nm, and then decreased as the emission wavelength was increased further. However, the PL decay time for QD2 decreased continuously from 1.83 to 1.22 ns as the emission wavelength was increased from 1,130 to 1,600 nm, respectively. These PL and TRPL results for QD2 can be explained by the large variation in the QD size with stacking number caused by the phase separation of InAlGaAs.