• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.04b
• /
• pp.308-313
• /
• 1995

Non-destructive inspection techniques using laser have been broading their application areas as well as growing their measurement skills together with the rapid development of circumferential technology like fiber optics and computer. The remarkable inspection technique using laser speckle, so-called ESPI is aleady on the stage of on-line testing with commercial products in other nations. Especially, this technique is expected to be applied to the nuclear industry. Because it is proper for the vibration measurement and it can be applied to objects of a high temperature. This paper describes the use of the ESPI system for measuring vibration patterns on the reflecting objects. Using this system, high-quality Jo fringers fso that fringe shift algorthms can be used to determine vibration interferograms recorded by the ESPI system.

• Proceedings of the KIEE Conference
• /
• 1998.11b
• /
• pp.487-489
• /
• 1998

To evaluate vehicle performances and driving behavior of a vehicle, it is necessary to acquisit and analyze vehicle data during the vehicle driving, which affect fuel economy and emissions. An in-vehicle data acquisition system, which is called Mode Survey System(MOSS), is designed and developed to analyze the traffic and driving patterns of the vehicle. MOSS is a stand-alone system based on the 68HC11 MCU. MOSS logs various data relating to powertrain and vehicle driving such as vehicle speed, engine RPM, gear position, brake, clutch, fuel consumption, and others. The driving patterns are dependent on the driver's habit and the road and traffic conditions, these driving patterns would be able to make a official driving mode to be used in emission, fuel efficiency, shift survey, catalyst durability, and other tests using the analyzed driving patterns.

• Applied Science and Convergence Technology
• /
• v.23 no.2
• /
• pp.97-102
• /
• 2014

A vacuum chamber for a commercial atomic force microscope (AFM) is designed and fabricated. Only minimal modifications were made to an existing microscope in an effort to work in a vacuum environment, while most of the available AFM functionalities were kept intact. The optical alignment needed for proper AFM operations including a SLD (superluminescent diode) and a photodiode can be made externally without breaking the vacuum. A vacuum level of $5{\times}10^{-3}$ torr was achieved with a mechanical pump. An enhancement of the quality factor was observed along with a shift in the resonance frequency of a non-contact-mode cantilever in a vacuum. Topographical data of a calibration sample were also obtained in air and in a low vacuum using the non-contact mode and the results were compared.

• 전기의세계
• /
• v.28 no.1
• /
• pp.43-52
• /
• 1979

Recently, interest in multivalued(MV) logic system has been increased, despites the apparent difficulties for practical application. This is because of the many advantages of the MV compared with the 2-valued logic systems, such as; (a) higher speed of arithmetical operation on account of the smaller number of digits required for a given data, (b) better utilization of data transmission channels on account of the higher information contents per line, (c) potentially higher density of information storage. This paper describes a MV switching theory and experimental MV logic elements based on current-mode logic technique. These elements tried were a 3-stable pulse generator, a ternary AND, a ternary OR, a MT circuit and a ternary inverter. Tristable flops which are indispensable for constituting a ternary shift register are synthesized using these gates. A BCD to TCD decoder, and vice versa, are proposed by using a ternary inverter and some binary gates. Thus, the feasibility of a large scale MV digital system has been demonstrate.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.2
• /
• pp.128-132
• /
• 2010

Photonic crystal is dielectric materials or a set of different dielectric materials with periodic structure. Line defect is obtained by leaving out a row of rods along the $\Gamma$-X direction. We showed the change of group velocity in waveguide mode and found resultant small group velocity. Characteristics of the small group velocity were described by electric field distribution. Investigating the phase shift, it is confirmed if small group velocity is positive or negative.

• Journal of the Optical Society of Korea
• /
• v.8 no.4
• /
• pp.163-167
• /
• 2004

We propose and demonstrate an external optical modulation method based on TE/TM-mode absorption nulls in a Multiple Quantum Well(MQW) Fabry-Perot laser diode(FP-LD). The center wavelength of the absorption nulls is rapidly shifted to short-wavelength by the small current change(~1mA) in the FP-LD, which can modulate an optical signal with more than 10 dB of extinction ratio(ER). The shift of the center wavelength comes from the refractive index change due to anomalous dispersion and the plasma effect in MQW FP-LD waveguide. Non-inverting and inverting signals are made by TE- and TM-mode absorption nulls at 155.52 Mbps and BERs for the signals are measured.

• Smart Structures and Systems
• /
• v.19 no.1
• /
• pp.91-103
• /
• 2017

Generalized fractal dimension is used to detect the presence of partial delamination in a composite laminated beam. The effect of boundary conditions and location of delamination on the fractal dimension curve is studied. Appropriability of higher mode shape data for detection of delamination in the beam is evaluated. It is shown that fractal dimension measure can be used to detect the presence of partial delamination in composite beams. It is found that the torsional mode shape is well suited for delamination detection in beams. First natural frequency of delaminated beam is found to be higher than the healthy beam for certain small and partial width delaminations and some boundary conditions. An explanation towards this counter intuitive phenomenon is provided.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.20-22
• /
• 2019

본 논문에서 공통모드 커플드 인덕터(Common Mode Coupled Inducter, CMCI)를 적용한 2단 직렬 위상천이 풀브리지 컨버터를 제안한다. 제안하는 위상천이 풀브리지 컨버터는 고주파수로 동작하며, 높은 입력전압에 대응할 수 있다. 풀브리지를 직렬로 쌓은 구조로 상단 풀브리지 컨버터와 하단 풀브리지 컨버터가 동시에 스위칭 한다. 2차측은 센터텝 정류기를 사용하여 풀브리지 정류기에 비해 다이오드 전압강하가 절반이라는 장점을 가진다. 또한, 변압기에 CMCI를 적용하여 1차측 상단과 하단의 전류 균형을 유지하도록 구성하였다. 제안하는 위상천이 풀브리지 컨버터의 5.8kW급 시제품을 제작하여 그 타당성을 검증하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.7C
• /
• pp.421-427
• /
• 2011

The importance of the real-time object recognition and tracking field has been growing steadily due to rapid advancement in the computer vision applications industry. As is well known, the mean-shift algorithm is widely used in robust real-time object tracking systems. Since the mentioned algorithm is easy to implement and efficient in object tracking computation, many say it is suitable to be applied to real-time object tracking systems. However, one of the major drawbacks of this algorithm is that it always converges to a local mode, failing to perform well in a cluttered environment. In this paper, an Optical Flow-based algorithm which fits for real-time recognition of multiple moving objects is proposed. Also in the tests, the newly proposed method contributed to raising the similarity of multiple moving objects, the similarity was as high as 0.96, up 13.4% over that of the mean-shift algorithm. Meanwhile, the level of pixel errors from using the new method keenly decreased by more than 50% over that from applying the mean-shift algorithm. If the data processing speed in the video surveillance systems can be reduced further, owing to improved algorithms for faster moving object recognition and tracking functions, we will be able to expect much more efficient intelligent systems in this industrial arena.

• Journal of Welding and Joining
• /
• v.18 no.1
• /
• pp.59-69
• /
• 2000

The purpose of the present study was to investigate weld metallurgical phenomena such as primary solidification mode, microstructural evolution and hot cracking susceptibility in nitrogen-bearing austenitic stainless steel GTA welds. Eight experimental heats varying nitrogen content from 0.007 to 0.23 wt.% were used in this study. Autogenous GTA welding was performed on weld coupons and the primary solidification mode and their microstructural characteristics were investigated from the fusion welds. Varestraint test was employed to evaluate the solidification cracking susceptibility of the heats and TCL(Total Crack Length) was used as cracking susceptibility index. The solidification mode shifted from primary ferrite to primary austenite with an increase in nitrogen content. Retained delta ferrite exhibited a variety of morphology as nitrogen content varied. The weld fusion zone exhibited duplex structure(austenite+ferrite) at nitrogen contents less than 0.10 wt.% but fully austenitic structure at nitrogen contents more than 0.20 wt.%. The weld fusion zone in alloys with about 0.15 wt.% nitrogen experienced primary austenite + primary ferrite solidification (mode AF) and contained delta ferrite less than 1% at room temperature. Regarding to solidification cracking susceptibility, the welds with fully austenitic structure exhibited high cracking susceptibility while those with duplex structure low susceptibility. The cracking susceptibility increased slowly with an increase in nitrogen content up to 0.20 wt.% but sharply as nitrogen content exceeded 0.20 wt.%, which was attributed to solidification mode shift fro primary ferrite to primary austenite single phase solidification.