• 한국신뢰성학회지:신뢰성응용연구
• /
• 제16권4호
• /
• pp.347-355
• /
• 2016

Purpose: With the advance of miniaturization of electronic products, stacked packages of high density semiconductors are commonly used. Potential failure modes and mechanisms of stacked packages are identified. Methods: Failure modes and mechanisms of thin chip stacked packages are determined through the categorization and failure analysis: delamination, non-wet, crack, ESD, EMI and the process related damages. Results: Those failure modes are not easy to find and require excessive amount time and effort for analysis and subsequent improvement. Conclusion: In this study, a method of estimating the failure rate based on the strength measurement is suggested.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.635-642
• /
• 2004

Failure occurred slope, due to typhoon 'Rusa' and 'Maemi' last two years, was studied to evaluate the slope failure characteristics. There're three types of the slope in this study, ie. soil slope, rock slope, mixed slope. Statistical analysis was used to estimate the relation between slope type and failure mode. Among the failure occurred slope, soil slope & mixed slope are dominant at the ratio of 33%, 44% respectively. We conclude that soil slope & mixed slope have more higher risk than rock slope during heavy rainfall.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 추계학술대회(한국공작기계학회)
• /
• pp.209-213
• /
• 2001

The reliability data analysis for components of CNC machining center is studied in this paper. The failure data of mechanical part is analyzed by Exponential, Weibull, and Log-normal distributions. And then, the optimum failure distribution model is selected by goodness of fit test. The reliability data analysis program is developed with ASP language to use on the Internet. The failure rate, MTBF, life, and failure mode of mechanical parts are estimated and searched by this program. The failure data and analysis results are stored in the database.

• 전산구조공학
• /
• 제24권4호
• /
• pp.40-48
• /
• 2011

• 한국신뢰성학회:학술대회논문집
• /
• 한국신뢰성학회 2001년도 정기학술대회
• /
• pp.167-172
• /
• 2001

• 한국경영과학회지
• /
• 제20권3호
• /
• pp.43-59
• /
• 1995

This paper presents a method for estimating the population variability distribution of the failure parameter (failure rate or failure probability) for each failure mode considered in PSA (Probabilistic Safety Assessment). We focus on the utilization of generic estimates from various industry compendia for the estimation. The estimates are complicated statistics of failure data from plants. When the failure data referred in two or more sources are overlapped, dependency occurs among the estimates provided by the sources. This type of problem is first addressed in this paper. We propose methods based on ML-II estimation in Bayesian framework and discuss the characteristics of the proposed estimators. The proposed methods are easy to apply in real field. Numerical examples are also provided.

• 한국안전학회지
• /
• 제17권4호
• /
• pp.52-60
• /
• 2002

Failure criterion is a parameter to represent the resistance to failure of locally wall thinned pipe, and it depends on material characteristics, defect geometry, applied loading type, and failure mode. Therefore, accurate prediction of integrity of wall thinned pipe requires a failure criterion adequately reflected the characteristics of defect shape and loading in the piping system. In the present study, the finite element analysis was performed and the results were compared with those of pipe experiment to develop a sound criterion for failure of internally wall thinned pipe subjected to combined pressure and bending loads. By comparing the predictions of failure to actual failure load and displacement, an appropriate criterion was investigated. From this investigation, it is concluded that true ultimate stress criterion is the most accurate to predict failure of wall thinned pipe under combined loads, but it is not conservative under some conditions. Engineering ultimate stress estimates the failure load and displacement reasonably for al conditions, although the predictions are less accurate compared with the results predicted by true ultimate stress criterion.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2018년도 추계학술논문요약집
• /
• pp.105-106
• /
• 2018

It is important to set up a reasonable failure criterion for cladding, because being able to determine the cladding integrity during transportation is essential for the evaluation of SNF transportation system. There are a few of measures which can be used as a failure criterion for cladding subjected to its specific failure mode. Therefore, to select and to use appropriate failure criterion measures, i.e. strain(UE), $K_{IC}$, and CSED would be a key in evaluating the cladding integrity during transportation with every aspects. In order to justify and quantify that criterion properly, various experiments for the mechanical properties of the claddings with different conditions shall be implemented, which data will enable to justify the failure criteria proposed.

• 대한관절경학회지
• /
• 제8권1호
• /
• pp.37-44
• /
• 2004

목적: 잠김(Locking)이 가능한 이동 매듭의 (sliding knot) 최적 매듭 유지력 (knot-holdingcapacity KHC)을 가지기 위한 추가적인 반 매듭의 (additional half-hitches) 개수를 알아보고자 하였다. 대상 및 방법: 4가지의 관절경적 이동 매듭법 (Duncan매듭법, Field 매듭법, Giant매듭법, SMC매듭법)을 대상으로 매듭 유지력을 실험하였다. 각각의 매듭을 만들기 위해 처음의 이동 매듭과 추가적인 5개의 반 매듭으로 구성된 6개의 연속적인 매듭을 만들었다. 각각의 추가된 반 매듭은 서로 교차하며 매듭의 지대 (post)도 교차하여 매는 방식으로 (reversing half-hitches with alternate posts, RHAPS) 하였다. 각각의 연속적인 매듭을 구성하기위해 No.2 Ethibond봉합사를 이용하여 각각의 매듭 형태에 12개의 매듭을 만들었다. 매듭의 인장 및 유지력 실험은 servohydraulic material testing system(Instron 8511, MTS, Minneapolis, MN)으로 주기적 부하(cyclic loading)를 시켜, 임상적으로 실패라 규정한 3 mm의 전위가 생길 때까지의 부하 (load to clinical failure). 매듭이 완전히 실패했을 때의 부하 강도 (load to ultimate failure), 그리고 실패 형태 (mode of failure)를 측정하였다. 결과: 추가적인 반 매듭이 없는 최초의 이동 매듭 자체로는 대부분 주기적 부하에 의해 매듭의 실패를 보였다. 주기적 부하 검사에서 각각의 추가적인 반 매듭이 증가할수록 평균 전위 값은 감소하였다. SMC 매듭법과 Giant 매듭법은 하나의 추가적인 반 매듭 이후로 0.1 mm이하의 전위 값을 보였고 Field와 Duncan 매듭법은 3개의 추가 반매듭이 필요하였다. SMC 매듭법과 Duncan 매듭법은 80 N을 견디기 위해 단 하나의 추가 반 매듭이 필요하였고, Field와 Giant 매듭법은 2개의 추가 반 매듭이 필요하였다. 100 N이상의 부하를 견디기 위해서는 SMC 매듭법은 3개의 추가 반 매듭이 필요하였고, 다른 3가지의 매듭법은 4개의 추가 반 매듭이 필요하였다. 추가 반 매듭이 증가함에 따라 봉합사는 풀리는 것보다 끊어지는 양상을 보였다. Duncan매듭법은 5개의 추가 반 매듭 이후에도 풀림현상을 보였고, 다른 3개의 매듭법은 3개의 추가 반 매듭 이후엔 75%이상이 봉합사의 풀림 현상보다는 끊어지는 양상을 보였다. (SMC, Field 매듭법은 92%, Ciant 매듭법은 75%)결론: 어떤 매듭법이라도 이동 매듭법 만으로는 주기적 부하 검사를 견디지 못했다. 모든 종류의 실험에서 SMC 매듭법은 최소2개의 두개의 추가 반 매듭이 필요하였다. Duncan 매듭법은 최적 매듭 유지력을 위해 3개 이상의 추가 반 매듭이 필요하였다. 모든 매듭법에서 3개나 그 이상의 추가 반 매듭이 최적 유지력에서 정점에 가까운 양상을 보였다.

• 한국항공운항학회지
• /
• 제24권4호
• /
• pp.26-34
• /
• 2016

In this study, reliability prediction of the ignition system of hybrid rocket is performed. The FMECA is preceded to the reliability prediction. To this end, the ignition system is divided into 5 components and 19 potential failure modes. The failure cause and effects are identified and criticality analysis is carried out for each failure mode, in which the criticality number is estimated using the failure rate databases. Among the numbers, the failure modes and components with higher criticality and severity are chosen and allocated with higher weighting factor. The reliability predictions are performed using the failure rate databases, from which the current ignition system is found to satisfy the target reliability.