• 한국전기전자재료학회논문지
• /
• 제16권2호
• /
• pp.131-137
• /
• 2003

We have performed computer simulation to obtain electro-optic chracteristics of reflective liquid crystal display (LCD) using wide viewing angle LC mode, fringe field switching(FFS). Unlike other reflective LCD modes, in the FFS mode, the LC director in plance so an application to reflective display consisted of polarizer, LC layer and reflector is possible. when an incident light is 550mm, the optimal cell retardation value is 0.1365${\mu}$m and the efficiency of reflectivity is high over 90% with very little wavelength dispersion. Further, we have studied a new reflective display with polarizer, optical compensation film with half plate, LC plus reflector. The display with optimized cell parameters shows high contrast ratio (CR) over 130 with high light efficiency over 90% at normal direction and the CR greater than 5 exists over 60$^{\circ}$ of polar angle in all directions.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.306-309
• /
• 2008

We proposed azimuthally continuous nematic domain mode characterized by a cone field induced from patterned electrode structure with a circular slit. This mode has good optical performances such as higher transmittance and wider viewing angle through decreasing the demerits caused by domain walls. We could confirm to these optical characteristics by the manufactured sample.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.446-447
• /
• 2006

We investigated the electro-optic characteristics of a fringe-field driven twisted nematic (TN) display using a LC with negative dielectric anisotropy depending on electrode structures. The fringe-field driven TN mode known to exhibit wide viewing angle and excellent color characteristics over a wide viewing range and high transmittance. However, when the electrode width and distance between them is large enough, the transmittance is lower than the conventional vertical field-driven TN mode. By narrowing the electrode width and distance, the transmittance reaches the same value of the conventional TN mode.

• 한국생활과학회지
• /
• 제8권2호
• /
• pp.399-417
• /
• 1999

Viewers have always switched channels and they have selected by turning away from the TV and returning to the set when the content seemed more amusing. Also, people usually watch television with their family members and thus the experience of viewing is embedded uniquely in ongoing processes of family interaction. In other words, people develop patterns and habits through the act of viewing together. As viewing with family members is the most frequent mode of media exposure, the context of family viewing needs to be thoroughly examined if we are to understand the family's use of television. The purpose of this paper is to investigate the dynamic nature of television viewing behavior. With the people meter's second-by-second viewing information, first we analyze who, when, and why viewers change channels. The ensuing reduction of advertising impact due to zapping will be investigated as well. Then the focus will be shifted to the dynamic interaction of coviewing among family members. In order to further explore the in-depth nature of television viewing, actual viewing information should be cross-analyzed with respect to both demographic and psychographic variables. In this study we surveyed individual characteristics such as television watching patterns, program type preference, attitude toward commercials, channel control intensity, and personalities. We have demonstrated that the results of an meticulus analysis of survey data provide valuable insights into the dynamics of television viewing among family members.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1386-1389
• /
• 2008

Conventional viewing angle switching electrode requires pixel division and additional liquid crystal panel. Hence the conventional viewing angle switching has low aperture ratio and high thickness. In this paper we proposed new viewing angle switching using hybrid aligned nematic mode by fringe-field electrode field (named HAN-FFS) with single liquid crystal panel. The fringe-field switching electrode is located at the bottom, and the additional common electrode is located at the top of the cell to control viewing angle. The proposed device is free from additional liquid crystal panel and pixel division. Consequently, the suggested structure has not only high aperture ratio but also show an excellent potential for viewing angle switching.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1999년도 제16회 광학 및 양자전자 학술발표회Proceedings of 16th Optics and Quantum Electronics Conference, 1999
• /
• pp.202-203
• /
• 1999

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.463-465
• /
• 2006

We have developed the VIC (Viewing-angle Image Control) TFT-LCD, which can change viewing-angle from $80^{\circ}$ to $170^{\circ}$. This display has the same thickness and weight as existing TFT-LCD, because it is made of only single LC cell without additional components. Moreover, we developed ways to protect effectively the displayed information in narrow viewing angle mode.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.1092-1095
• /
• 2003

A driving mechanism and excellent features for an in-plane switching twisted nematic liquid crystal mode (IT mode) that could possibly improve the viewing-angle and color shift characteristics and the cell gap error tolerance is proposed. .It is important that the surface azimuthal anchoring strength of the liquid crystal cell differs at the upper and lower substrates. Furthermore. as a rubbing-free LCD. amorphously aligned in-plane switching twisted nematic mode (a-IT mode) is also demonstrated.

• Journal of Information Display
• /
• 제5권2호
• /
• pp.23-26
• /
• 2004

For high end, large area displays, all current LC modes require some degree of optical compensation to improve the front of screen viewing experience. Currently most optical films are laminated to the outside of the LCD cell, between the glass and polariser. In this paper we wish to show how it is possible to integrate the compensating optical film within a VA mode LCD cell. The paper will describe the process of making the biaxial film through the process of in-situ photopolymerisation of an aligned film of reactive mesogens in the cholesteric phase using polarised UV light. The film can be made on the colour filter array side of the LCD panel. In addition the process of fabricating a VA mode LCD containing this film will be described and the performance of this module will be presented.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.518-521
• /
• 2004

We have investigated about compensation film to reduce the light leakage at an oblique angle in-plane switching mode. It is well known that uncompensated in-plane switching (US) and fringe field switching (FFS) liquid crystal displays (LCDs) have much better viewing angle than other modes owing to the in-plane rotation of the LC director. However, to accomplish optimal viewing angle characteristics in these devices, they must be compensated by one or more films. So, in this paper, we have studied how to reduce the light leakage with viewing angle using discotic film in dark state.