• 한국광학회지
• /
• 제13권1호
• /
• pp.58-64
• /
• 2002

마하젠더형 광세기 변조기를 이용하여 l0 GHz 고조모드잠금된 분산보상 어븀첨가 광섬유 레이저의 출력 안정화 되먹임 제어를 하고 출력의 안정도를 측정하였다. 레이저의 출력 불안정성이 발생하였을 때 나타나는 완화진동 주파수 성분을 억압하도록 공진기 길이를 조정하여 16시간 이상 출력 안정화를 시켰다. 이때, 안정화가 진행되는 동안 rms 위상잡음과 rms진폭잡음은 각각 260 fsec-524 fsec와 4-11.5%의 사이에 분포하였고, BER은 $10^{-13}$ 으로 측정되었다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 추계학술대회 논문집
• /
• pp.144-149
• /
• 2001

The failure at the head section of rubble-mound detached breakwaters is more important than other failure modes. because this initial failures will occur the failure of the trunk section and lead to the instability of the structure. The three-dimensional failure modes are discussed using the experimental data with multi-directional waves considering the failure modes occurring around the head of the rubble-mound detached breakwater. The spacial characteristics of failure mode around the rubble-mound structures can be summarized as follows: 1) It was clarified that the failure modes at the round head of a detached breakwater are classified as failure by plunging breaker on the slope, failure by direct incident wave force and failure by scouring at the toe of the detached breakwater. 2) The failure mode was found in the lower wave height than the design wave by the breaker depth effects. It is clarified that the structure monitored was safely designed for the design wave but the failure was occurred by the reason of breaker waves and scouring processes at the toe 3) It was observed that scouring at the toe developed in the region where steady stream due to vorticity was generated and the spatial variation of scour at the toe of the round head was predominated by incident wave direction.

• 대한기계학회논문집A
• /
• 제26권8호
• /
• pp.1534-1544
• /
• 2002

The TDCSA(Time Delay Control with Switching Action) method, which consists of Time Delay Control(TDC) and a switching action of sliding mode control(SMC), has been proposed as a promising technique in the robust control area, where the plant has unknown dynamics with parameter variations and substantial disturbances are preset. When TDCSA is applied to the plant with saturation nonlinearity, however, the so-called windup phenomena are observed to arise, causing excessive overshoot and instability. The integral element of TDCSA and the saturation element of a plant cause the windup phenomena. There are two integral effects in TDCSA. One is the integral effect occurred by time delay estimation of TDC. Other is the integral term of an integral sliding surface. In order to solve this problem, we have proposed an anti-windup scheme method for TDCSA. The stability of the overall system has been proved for a class of nonlinear system. Experiment results show that the proposed method overcomes the windup problem of the TDCSA.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.236-240
• /
• 2005

This paper deals with friction-induced vibration of disc brake system under constact friction coefficient. A linear, finite element model to represent the floating caliper disc brake system is proposed. The complex eigenvalues are used to investigate the dynamic stability and in order to verify simulations which are based on the FEM model, The comparison of experimental and analytical results shows a good agreement and the analysis indicates that mode coupling due to friction force and geometric instability is responsible fur disc brake squeal. And the Front brake system reduced the squeal noise using design of experiment method(DOE). This helped to validate the FEM model and establish confidence in the simulation results. Also they may be useful during real disk brake model.

• Nuclear Engineering and Technology
• /
• 제31권2호
• /
• pp.202-213
• /
• 1999

Effects of the rotary inertia of concentrated masses on the natural vibrations of fluid conveying pipes have been studied by theoretical modeling and computer simulation. For analysis, two boundary conditions for pipe ends, simply supported and clamped-clamped, are assumed and Galerkin's method is used for transformation of the governing equation to the eigenvalues problem and the natural frequencies and mode shapes for the system have been calculated by using the newly developed computer code. Moreover, the critical velocities related to a system instability have been investigated. The main conclusions for the present study are (1) Rotary inertia gives much change on the higher natural frequencies and mode shapes and its effect is visible when it has small value, (2) The number and location of nodes can be changed by rotary inertia, (3) By introducing rotary inertia, the second natural frequency approaches to the first as the location of the concentrated mass approaches to the midspan of the pipe, and (4) The critical fluid velocities to initiate the system unstable are unchanged by introduction of rotary inertia and the first three velocities are $\pi$, 2$\pi$, and 3$\pi$ for the simply supported pipe and 2$\pi$, 8.99, and 12.57 for the clamped-clamped pipe.

• 한국항공우주학회지
• /
• 제35권2호
• /
• pp.94-100
• /
• 2007

초음속 제트 마하수 1.07부터 1.2 범위에서 축대칭 제트 스크리치 톤을 해석하였다. 축대칭 모드는 낮은 마하수 축대칭 제트의 지배적인 스크리치 톤 모드이다. 난류 해석을 위해 수정된 Spalart-Allmaras 모델을 RANS (Reynolds-averaged Navier-Stokes) 방정식에 사용하였다. 스크리치 톤 해석에서 중요한 음파의 전파, shock-cell 구조 및 거대한 불안정 파를 정확히 계산하기 위해 비반사 특성 경계조건과 연계한 고차정확도의 ENO 기법을 사용하였다. 수치 해석결과는 다른 연구자들의 실험 및 계산 결과와 잘 일치하였으며, 따라서 본 연구에 사용된 수치 기법들이 초음속 제트 유동 및 소음연구에 타당함을 확인하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2006년도 제26회 춘계학술대회논문집
• /
• pp.279-282
• /
• 2006

이산화탄소를 첨가한 저 신장률 메탄-공기 대향류 확산화염에서 화염소화 거동과 에지화염 진동을 조사하기 위해 실험을 수행하였다. 화염소화 조건에서의 임계 몰분율을 속도비와 전체화염 신장률에 따라 분석하였다. 또한 에지화염 진동의 시작조건과 관련된 모드들을 전체화염 신장률에 따라 조사하였다. 화염길이는 측면방향 열손실과 밀접한 연관이 있으며, 측면방향 열손실은 화염소화와 에지화염 진동에 중대한 영향을 미친다. 에지화염의 진동 모드는 성장, 감쇠, 조화 세 가지로 분류된다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 춘계학술대회 논문집
• /
• pp.277-280
• /
• 2009

본 연구는 v-gutter형 보염기를 장착한 연소기 내에 발생한 연소 주파수의 발생 메커니즘에 대해 규명 하는 것이다. 연소기는 $40{\times}40\;mm$의 단면적을 가진 긴 덕트 형상을 가지고 있으며, 14mm의 폭을 가진 v-gutter 형의 보염기를 장착하였다. 연료로 등유와 메탄를 수직 분무하여 실험을 수행하였다. 연소 시 발생하는 주파수는 연소기의 형상에 기인한 1L 종방향 모드와 보염기에서 발생하는 와류 주파수가 주로 발생함을 확인하였다. 또한 연료의 특성에 기인한 주파수와 노즐의 영향에 대한 주파수가 저주파 영역에서 발생함을 확인하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.527-534
• /
• 2000

136 cut slopes which extends from Namyangju to Chunchon city along the 46th national highway were investigated to analyze the influence factors affecting slope instability. Geologic and geotechnical conditions were examined and the detailed investigation were carried out for fifty five failed slopes. failure mode (wedge failure, planar failure, circular failure, sheet eroison and rock falls) are examined with respect to slope inclination, rock type, weathering grade and discontinuity patterns. It is suggested that the failure modes and their dimensions have relations to the morphology and geologic conditions of the slopes. Wedge failure has highest is the most frequent failure mode and falls, sheet erosions, planar failures and circular in descending order of failure percentage. Wedge failure is most dominant failure type over all lithology except quartzite formation. In slopes of well foliated and banded gneiss, failure ratio of wedge is up to 50% ca. Failure ratio(number of rock fall/number of total failure) of rock fall increases with increase fo slope inclinations and decrease of weathering grade. Dimension analyses of failed slopes shows wedge and circular failure has higher value of D/L and D/H than planar failure and sheet erosion.

• International Journal of Aeronautical and Space Sciences
• /
• 제12권4호
• /
• pp.305-317
• /
• 2011

This paper presents an overview on flutter boundary prediction in tests which is principally based on a system stability measure, named Jury's stability criterion, defined in the discrete-time domain, accompanied with the use of autoregressive moving-average (AR-MA) representation of a sampled sequence of wing responses excited by continuous air turbulences. Stability parameters applicable to two-, three- and multi-mode systems, that is, the flutter margin for discrete-time systems derived from Jury's criterion are also described. Actual applications of these measures to flutter tests performed in subsonic, transonic and supersonic wind tunnels, not only stationary flutter tests but also a nonstationary one in which the dynamic pressure increased in a fixed rate, are presented. An extension of the concept of nonstationary process approach to an analysis of flutter prediction of a morphing wing for which the instability takes place during the process of structural morphing will also be mentioned. Another extension of analytical approach to a multi-mode aeroelastic system is presented, too. Comparisons between the prediction based on the digital techniques mentioned above and the traditional damping method are given. A future possible application of the system stability approach to flight test will be finally discussed.