• 한국분무공학회지
• /
• 제9권2호
• /
• pp.41-49
• /
• 2004

Liquid breakup under the variation of AC frequency has been studied experimentally in the electrohydrodynamic atomization. The effect of parameters such as charging voltage, flow rate, nozzle tip inner diameter and power frequency have been considered. This work was performed to investigate the experimental analysis for the effect of AC frequency on breakup process, the mapping of occurrence of disintegration region, and the relationship between the applied power and the droplet radius. The experimental results show that the increase of applied voltage in a certain frequency band leads to a reduction in the droplet size within the limits from 50Hz to 400Hz. The transition phenomena from dripping mode to spindle mode were observed under the band of sudden fall of droplet radius changing ratio, and the synchronous region were produced within the range of applied voltage from 5kV to 6kV.

• East Asian mathematical journal
• /
• 제36권2호
• /
• pp.173-201
• /
• 2020

Mathematical modeling has been emphasized because it offers important opportunities for students to both apply their learning of mathematics to a situation and to explore the mathematics involved in the context of the situation. However, unlike its importance, mathematical modeling has not been grounded in typical mathematics classes because teachers do not have enough understanding of mathematical modeling and they are skeptical to implement it in their lessons. The current study analyzed the data, such as video recordings, slides, and surveys for teachers, collected in four lessons of teacher education in terms of mathematical modeling. The study reported different kinds of tasks that are authentic with regards to mathematical modeling. Furthermore, in teacher education, teachers' identities have separated a mode as learners and a mode as teachers and conflicts and intentional transition were observed. Analysis of the surveys shows what teachers think about mathematical modeling with their understanding of it. In teacher education, teachers achieved different kinds of modeling tasks and experience them which are helpful to enact mathematical modeling in their lessons. However, teacher education also needs to specifically offer what to do and how to do it for their lessons.

• 시스템엔지니어링학술지
• /
• 제1권2호
• /
• pp.43-48
• /
• 2005

This paper describes the results of applying States and Modes Analysis, one of the requirements analysis techniques, to the development requirements of flight control software for Smart UAV. State/mode table enabled us to investigate various operation and design concepts, and as a result essential requirements for flight control software were established without omitting necessary requirements. Through the use of scenario-specific state transition diagrams, dynamic behaviours and control/response interfaces between each state and mode could been clearly identified, which made it possible to establish requirements related to dynamic behaviours of states and modes which are essential to the design of flight control software.

• Journal of Power Electronics
• /
• 제15권4호
• /
• pp.1035-1046
• /
• 2015

This study presents a practical implementation of a multi-mode two-phase interleaved boost converter for fuel cell electric vehicle application. The main operating modes, which include two continuous conducting modes and four discontinuous conducting modes, are discussed. The boundaries and transitions among these modes are analyzed with consideration of the inductor parasitic resistance. The safe operational area is analyzed through a comparison of the different operating modes. The output voltage and power characteristics with open-loop or closed-loop operation are also discussed. Key performance parameters, including the DC voltage gain, input ripple current, output ripple voltage, and switch stresses, are presented and supported by simulation and experimental results.

• 전기전자학회논문지
• /
• 제22권4호
• /
• pp.1210-1213
• /
• 2018

In this paper, we propose a method to reduce the amount of current through the Timing Control of the duty cycle and the Report Attribute Control at the MAC Layer in consideration of the Sleep Mode under the IoT wireless environment. The use of a duty cycle is an effective way to reduce energy consumption on wireless sensor networks where the node is placed in sleep mode periodically. In particular, we studied how to control power efficiency through duty rate in Short Transition Time and ACK Time processing while satisfying radio channel limitation criterion. When comparing before and after the improvement considering the delay time constraint, we validated the correlation of the electrical current reduction.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2002년도 춘계학술발표논문집
• /
• pp.215-217
• /
• 2002

본 논문에서는 CM-MVL(Current Mode Multi-Valued Logic)을 이용한 Host와 LCD Controller 간에 인터페이스 회로를 제안한다. 제안한 회로는 기존의 LVDS(Low Voltage Differential Signaling)과 TMDS(Transition Minimized Differential Signaling)와 같은 전류 특성을 가지며, 3비트 동시 전송이 가능하여 동일한 전송 속도 하에서 보다 많은 데이터를 전송할 수 있다. 그리고 전류에 의한 데이터 전송을 통하여 노이즈에 강한 특성을 나타낸다. 제안한 회로는 HSPICE 시뮬레이션을 통해서 회로의 동작을 확인하였다.

• Tribology and Lubricants
• /
• 제2권1호
• /
• pp.39-45
• /
• 1986

Wear simulation test have been conducted in mild, severe and transient wear regions by a four-ball wear tester. Wear particles are separatively deposited by the RPD technique, and quantitatively analysed in terms of wear particles size distribution. Characteristics of the wear particle size distribution are compare to the results of wear tests through both weibull parameters and center moment method of the weibull distribution function.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2009년도 임시총회 및 하계학술연구발표회
• /
• pp.53-54
• /
• 2009

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2010년도 임시총회 및 하계학술연구발표회
• /
• pp.64-65
• /
• 2010

• 한국전자현미경학회:학술대회논문집
• /
• 한국현미경학회 1999년도 제30차 추계학술대회
• /
• pp.54-58
• /
• 1999

GaAs 위에 증착된 ZnTe 박막의 계면 구조를 투과 전자 현미경을 이용하여 관찰하였다. 2-빔 조건을 사용하여 관찰된 계면에서 모아레 즐무늬가 관찰되었으며, 이러한 모아레 줄무늬의 생성원리를 규명하였다. 또한 고분해능 투과 전자현미경상으로부터 얻어진 결과와 비교하여 ZnTe의 성장방식 전이 및 섬 구조를 가지는 ZnTe 박막의 여러 가지 구조적 성질들 - 섬의 크기, 변형량, $60^{\circ}$ 전위의 분포 등 - 에 대해 밝혔다. 이러한 결과들은 큰 변형량이 걸린 반도체 이종 접합 구조의 해석에 일반적으로 적용될 수 있다.