• Journal of Power Electronics
• /
• 제13권3호
• /
• pp.381-389
• /
• 2013

A method to control the speed or the torque of a permanent-magnet direct current motor is presented. The rotor speed and the external torque estimation are simultaneously provided by appropriate observers. The sensorless control scheme is based on current measurement and switching states of power devices. The observers performances are dependent on the accurate machine parameters knowledge. Sliding mode control approach was adopted for drive control, providing the suitable switching states to the chopper power devices. Despite the predictable chattering, a convenient first order switching function was considered enough to define the sliding surface and to correspond with the desired control specifications and drive performance. The experimental implementation was supported on a single dsPIC and the controller includes a logic overcurrent protection.

• 조명전기설비학회논문지
• /
• 제28권1호
• /
• pp.36-44
• /
• 2014

The conventional central photo voltaic inverters have several problems. First, shadow problem in each solar panel, and high DC voltage problem from each panel because of concentration to one central inverter. Therefore, module integrated inverter is proposed to solve these problems. The inverter should be small and cost effective. The cost and size in the inverter depend on the inductor. So the switching frequency should be increased to reduce the inductor and total size, but there is a problem in efficiency because of the losses in turn-on and turn-off. In the paper, the critical conduction mode(CRM) switching method is adopted to reduce the switching loss and interleaving method is proposed to increase the efficiency in Flyback converter. Finally, the validity of the proposed scheme is investigated with simulated and experimental results for a prototype system rated at 200W.

• Journal of Advanced Marine Engineering and Technology
• /
• 제29권2호
• /
• pp.243-250
• /
• 2005

A new technique for improving the efficiency of single-Phase high-frequency switch-mode boost rectifiers is proposed. This rectifier includes an additional boost converter that parallels the main high-frequency switching device. The additional converter. which is controlled at lower frequencies. bypasses most of the current in the main switch and the high frequency switching loss is greatly reduced accordingly. The rectifier works cooperatively in high efficiency and as if it were a conventional rectifier with one switching device. The proposed scheme is verified by computer simulation using software PSIM.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.567-570
• /
• 2004

We have designed a single gap transflective liquid crystal display (LCD) driven by a fringe electric field, in which the LCs are homogeneously aligned in the initial state. In the reflective and transmissive areas, the degrees of the rotation of the LC director are $22.5^{\circ}$ and $45^{\circ}$, respectively. Utilizing this mechanism and an in-cell retarder with a quarter-wave plate that is used below the LC layer, the transflective LCD using fringe-field switching (FFS) mode is realized.

• Journal of information and communication convergence engineering
• /
• 제17권3호
• /
• pp.221-226
• /
• 2019

In this work, a transmitter/receiver front-end module (T/R FEM) with an automatic Tx/Rx switching scheme for a 2.4 GHz microwave power transfer is developed for a retro-reflective beamforming scheme. Recently, research on wireless power transfer techniques has moved to wireless charging systems for mobile devices. Retro-reflective beamforming is a good candidate for tracking the spatial position of a mobile device to be charged. In Tx mode, the T/R FEM generates a minimum of 1 W. It also comprises an amplitude and phase monitoring port for transmitting RF power. In Rx mode, it passes an Rx pilot signal from a mobile device to a digital baseband subsystem to recognize the position of the mobile device. The insertion loss of the Rx signal path is 4.5 dB. The Tx and Rx modes are automatically switched by detecting the Tx input power. This T/R FEM is a design example of T/R FEMs for wireless charging systems based on a retro-reflective beamforming scheme.

• 한국통신학회논문지
• /
• 제42권4호
• /
• pp.864-870
• /
• 2017

본 논문은 넓은 부하 전류를 요구하는 휴대 기기에서 사용될 목적으로 주파수 전압 변환을 이용하여 모드 제어 가능한 듀얼 모드 벅 변환기를 설명한다. 기존의 히스테스테릭 벅 변환기의 문제인 저 부하에서의 PLL 보상 및 효율 저하를 제안하는 듀얼 벅 변환기의 개선된 PFM 모드를 통해 해결한다. 또한 기존의 듀얼 모드 벅 변환기의 주요 회로인 모드 제어기에서의 부하 변화 감지의 어려움과 느린 모드 전환 속도를 제안하는 모드 제어기로 개선 시킨다. 제안하는 모드 제어기는 최소 1.5us의 모드 전환 시간을 가진다. 제안하는 DC-DC 벅 변환기는 $0.18{\mu}m$ CMOS 공정에서 설계하였으며 칩 면적은 $1.38mm{\times}1.37mm$이다. 기생 소자를 포함한 인덕터와 커패시터를 고려한 후 모의실험 결과는 1~500mA의 부하 전류 범위에서 입력 전압을 2.7~3.3V를 가지며 PFM 모드는 65mV이내, 히스테리틱 모드에서는 고정된 스위칭 주파수 상태에서 16mV의 출력 리플 전압을 가지는 1.2V의 출력 전압을 생성한다. 제안하는 듀얼 모드 벅 변환기의 최대 효율은 80mA에서 95%를 나타내며 해당 전체 부하 범위에서 85% 이상의 효율을 지닌다.

• 조명전기설비학회논문지
• /
• 제29권1호
• /
• pp.80-85
• /
• 2015

In the issues of interleaved topology which have been in limelight as high power converter, various soft-switching methods are studied to reduce switching losses in high power application. The interleaved ZCT converter has an additional filter inductor to reduce losses of diodes during reverse recovery process. However, additional current conduction modes are occurred by the inductor, we need to analyze switching losses with inductor values on each mode. In this paper, current conduction modes and boundary conditions of interleaved ZCT converter are analyzed. In the conclusion, the minimum of switching losses in converter operation modes is analyzed by calculating switching losses.

• 전기전자학회논문지
• /
• 제17권3호
• /
• pp.229-233
• /
• 2013

We investigated electrical conduction and resistance switching behavior of the Ag/ZnO/Ti structures for random access memory devices. These films were prepared on glass substrate by dc sputtering technique at room temperature. The resistance switching follows unipolar switching mode with small switching voltages (0.4 V - 0.6 V). Two electrical conduction mechanisms dominating the LRS and HRS are Ohmic and trap-controlled space charge limited current, respectively. These both conductions are consistent with the filamentary model. Based on the filamentary model, the switching mechanism was also interpreted.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.32-33
• /
• 2009

We propose viewing angle switchable liquid crystal display(LCD) associated with fringe-field switching (FFS) mode with high aperture ratio characteristic. This device is composed of R(red), G(green), B(blue), pixel and W(white) pixel in which R,G,B pixel shows image and white pixel for both viewing angle control and image. Conventional viewing angle controllable liquid crystal display has not transmittance because the liquid crystal only tilts up without rotates in viewing angle control region. In this paper, we suggested that the device has high transmittance characteristic because the LC directors are rotated in which viewing angle control region are generated fringe electric field.

• 대한전자공학회논문지TC
• /
• 제44권3호
• /
• pp.92-97
• /
• 2007

스위칭 모우드 증폭기를 마이크로파 대역에서 이용하고자 하는 많은 연구가 있으며, 이러한 증폭기 중 E급 증폭기는 이론적으로 스위칭 동작을 통해 100%의 효율을 얻을 수 있다. 본 논문에서는 2.4GHz 대역 마이크로파 E급 증폭기로 출력 전력이 17.6dBm, 66%의 전력부가효율을 갖는 설계된 증폭기를 무선 랜 송신부에서 사용하기 위해 증폭기의 비선형 왜곡을 보상하고자 테이블 참조기법(Look Up Table)을 이용한 기저대역 사전왜곡 기법을 적용하였다. 설계된 증폭기는 -3dBm의 입력 무선랜신호를 인가하였을 때 출력스펙트럼 측정 결과가 IEEE 무선랜 스펙트럼 마스크 표준규격을 만족하며, 기저대역 사전왜곡을 적용하였을 때 중심주파수에서 20MHz offset인 주파수에서 최대 5dB의 ACPR 특성이 향상되었다.