• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1998년도 봄 학술발표회 논문집
• /
• pp.327-334
• /
• 1998

A method of calculating the natural frequency corresponding to the first mode of vibration of beams and toll.or structures, with irregular cross sections and with arbitrary boundary conditions was developed and reported by Kim, D. H. in 1974. In this paper, the result of application of this method to the special orthotropic plates with free edges supported on elastic foundation and with a pair of opposite edges under axial forces is presented. Such plates represent the concrete highway slab and hybrid composite pavement of bridges. The reinforced concrete slab can be assumed as a special orthotropic plate, as a close approximation. The highway slab is supported on elastic foundation, with free boundaries. Sometimes, the pair of edges perpendicular to the traffic direction may be subject to the axial forces. The plate is subject to the concentrated load/loads, in the form of traffic loads, or the test equipments. Any method nay be used to obtain the deflection influence surfaces needed for this vibration analysis. Finite difference method is used for this purpose, in this paper. The influence of the modulus of the foundation, the aspect ratio of the plate, and the magnitudes of the axial forces and the concentrated attached mass on the plate, on the natural frequency is thoroughly studied.

• 한국통신학회논문지
• /
• 제27권3A호
• /
• pp.205-210
• /
• 2002

In a Doppler weather radar, high resolution windspeed profile measurements are needed to provide the reliable detection of hazardous weather conditions. For this purpose, the pulse pair method is generally considered to be the most efficient estimator, However, this estimator has some bias errors due to asymmetric spectra and may yield meaningless results in the case of a multimodal return spectrum. Although the poly-pulse pair method can reduce the bias errors of skewed weather spectra, the modes of spectrum may provide more reliable information than the statistical mean for the case of a multimodal or seriously skewed spectrum. Therefore, the idea of relatively simple mode estimator for a weather radar is developed in this paper, Performance simulations show promising results in the detection of hazardous weather conditions.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.1103-1107
• /
• 1990

This paper describes a new method of noise-canceling in an instrumentation using a pair of identical Potential Transformers (PT). This method allows us to get reliable signals without any noise, not only on the transmission line, but also on the sensors; even if we do not have a reference noise or a specific noise. In this case "any noise" means normal mode noise (NMN), under a quarter frequency of the switching. We proposed to call this method alternating noise-canceling (ANC). The accuracy of this new method has been verified by experimentations.entations.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1034-1039
• /
• 2000

In turbo-machines operated at high speeds through gear speed increasers a precise coupled analysis of lateral and torsional vibrations is required to achieve highly reliable designs with low vibration and low noise levels, where the vibration coupling is due to the gear pair mesh stiffness. In this paper, applying the generalized coupled lateral-torsional finite element model of a gear pair element, has been analyzed a coupled lateral-torsional vibration of the prototype 800 RT turbo-chiller rotor-bearing system with a bull-pinion gear speed increaser. Results have shown that the coupled torsional natural frequencies have decreased due to the coupling effect of lateral vibration and particularly, the 2nd torsional natural frequency and its mode shape have had big changes. However, changes of lateral vibration characteristics have been noticed only at high lateral whirl natural frequencies above 15,000 rpm.

• 한국광학회지
• /
• 제16권6호
• /
• pp.535-541
• /
• 2005

$Cr^{4+}:YAG$ 레이저 매질을 사용하여 실온영역에서 안정적으로 수동 모드 잠금된 근적외선 펨토초 레이저를 제작하고, 그 특성을 분석하였다. 공진기 내부에 설치된 프리즘의 조절만으로 손쉬운 파장 조절이 가능하였으며, 연속 발진시 1400 nm부터 1510 nm까지 110 nm 정도, 모드 잠금 경우 1500 nm 부근에서 30 nm 정도의 파장 조절이 가능함을 확인하였다. $1.5 \%$의 투과율을 지닌 출력거울을 사용하였으며, 연속 발진시 흡수 파워가 7.6 W 일 때 최대 810 mW 이상의 출력을 측정하였다. 공진기 내에서 발생된 분산을 보상하기 위하여 적외선용 프리즘 쌍을 사용하였으며, 100 MHz의 반복률에서 푸리에 변환한계에 근접한 64 fs의 극초단 펄스 방출이 가능하였다. 레이저의 중심파장이 1510 nm 일 때 스펙트럼의 반치폭은 44 nm였다. 모드 잠금이 꺼지지 않고 장시간 안정적으로 작동이 가능한 레이저 제작을 위해 공진기 내부의 광 경로에 관을 설치하고 질소가스를 순환시켰으며, 평균출력 250 mW로 최적화하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권11호
• /
• pp.5209-5228
• /
• 2016

Device-to-device (D2D) communication underlaying cellular networks can bring significate benefits for improving the performance of mobile services. However, it hinges on elaborate resource sharing scheme to coordinate interference between cellular users and D2D pairs. We formulate a joint mode selection, link allocation and power control optimization problem for D2D communication sharing uplink resources in a multi-user cellular network and consider the efficiency and the fairness simultaneously. Due to the non-convex difficulty, we propose a three-step scheme: firstly, we conduct mode selection for D2D pairs based on a minimum distance metric after an admission control and obtain some cellular candidates for them. And then, a cellular candidate will be paired to each D2D pair based on fairness. Finally, we use Lagrangian Algorithm to formulate a joint power control strategy for D2D pairs and their reused cellular users and a closed-form of solution is derived. Simulation results demonstrate that our proposed algorithms converge in a short time. Moreover, both the sum rate of D2D pairs and the energy efficiency of cellular users are improved.

• 한국소음진동공학회논문집
• /
• 제12권2호
• /
• pp.116-123
• /
• 2002

Applying a general coupled lateral and torsional vibration finite element model of gear pair element, this paper intends to look into in detail the coupled lateral and torsional vibration characteristics of a turbo-chiller rotor bearing system, having a bull-pinion speed increasing gear. Investigations have been carried out systematically by comparing the uncoupled and coupled natural frequencies and their mode shapes upon varying the gear mesh stiffness with considerations on rotating speeds, and also by comparing the strain energies of lateral and torsional vibration modes. Results hale shown that some modes may hale the coupled lateral and torsional mode characteristics as the gear mesh stiffness Increases over a certain value, and moreover that their associated dominant modes may be different from their initial modes, j.e., a certain dominant mode may change from an initial torsional one to a lateral one or from an initial lateral one to a torsional one.

• 정보보호학회논문지
• /
• 제17권1호
• /
• pp.103-107
• /
• 2007

본 논문에서는 JCCI 2003에 제안된 새로운 인증-암호화 모드 $NAE^{[1]}$에 대한 위조 공격을 제안한다. NAE는 CFB 모드와 CTR 모드를 결합시킨 변형된 형태로, 하나의 기반이 되는 블록암호 키를 가지고 최소한으로 블록암호를 호출하는 인증-암호화 기법이다. 그러나 본 논문에서는 단순 암호문 조작으로 NAE에 대해 유효한 암호문-태그 쌍을 생성할 수 있음을 보인다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -1
• /
• pp.646-649
• /
• 2002

In this paper, a low-voltage CMOS squarer and a four-quadrant analog multiplier are presented. It is based on a source-coupled pair and a scaled-floating voltage generator which are modified to work as a voltage squaring and a sum/difference circuits. The proposed squarer/multiplier have been simulated with HSPICE, where -3㏈ bandwidth of 10MHz is achieved. The power consumption is about 0.6㎽, from a ${\pm}$1.5V supply, and the total harmonic distortion is less than 0.7%, with a 1.2V peak-to-peak 1MHz input signal.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(5)
• /
• pp.87-90
• /
• 2002

This paper describes design technique of switched-capacitor 1V delta-sigma modulator. To solve the incomplete switching operation at low voltage, bootstrapping technique is used. For PMOS input pair of 1V operational amplifier, simple common mode level down technique is used. Designed 2nd order single loop modulator has an oversampling ratio of 64 and obtains a peak SNR of 71dB, a dynamic range of 73 dB with the power consumption of 350uW at 1V power supply.