• International Journal of Precision Engineering and Manufacturing
• /
• 제7권2호
• /
• pp.52-55
• /
• 2006

The OLEDs(Organic Light-Emitting Diodes) structure organizes the bottom layer using glass, ITO(indium thin oxide), hole injection layer, hole transport layer, emitting material layer, electron transport layer, electron injection layer and cathode using metal. OLED has various advantages. OLEDs research has been divided into structural side and emitting material side. The amount of emitting light and luminescence efficiency has been improved by continuing effort for emitting material layer. The emitting light mechanism of OLEDs consists of electrons and holes injected from cathode and anode recombination in emitting material layer. The mobilities of injected electrons and holes are different. The mobility of holes is faster than that of electrons. In order to get high luminescence efficiency by recombine electrons and holes, the balance of their mobility must be set. The more complex thin film structure of OLED becomes, the more understanding about physical phenomenon in each interface is needed. This paper observed what the thickness change of hole transport layer has an affection through the below experiments. Moreover, this paper uses numerical analysis about carrier transport layer thickness change on the basis of these experimental results that agree with simulation results.

• Journal of the Korean Wood Science and Technology
• /
• 제37권2호
• /
• pp.137-140
• /
• 2009

Chromated copper arsenate (CCA), a long history of successful preservative, have raised environmental concerns. Adsorption characteristics of domestic soils for chromium, copper, and arsenic were assessed by measuring distribution coefficient ($K_d$) values of these metal components in a laboratory scale. The results revealed that $K_d$ values were higher in chromium, followed by arsenic and copper in soil matrix. Different soil matrixes resulted in varying mobilities of CCA components. The values of $K_d$ for all three metals increased with organic matter contents. The results suggest that the mobility of metal components may be very limited to the surface area adjacent to CCA-treated wood due to their fairly large distribution coefficient ($K_d$). However, the metal components would be persistent and accumulated in the soil, resulting in high chemical concentration in service area of treated wood.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.660-661
• /
• 2008

Nanotubes fabricated with diverse materials show different hydrophobic properties. The hydrophobic property is one of key properties for possible applications to ion channels due to their affinity. This study focuses on the structures of water molecules inside nanotubes with varying hydrophobicity using molecular dynamics simulation. Hydrophobicity here is determined by varying the attraction term in Lennard-Jones potential. The number of water molecules inside hydrophilic nanotubes increase, as expected, and their mobilities also increase. This trend is rather discrete with increasing number of water molecules and this discreteness is attributed to hydrogen bond. We plan to perform energy analysis to understand these structural results.

• Macromolecular Research
• /
• 제14권6호
• /
• pp.630-633
• /
• 2006

In heterojunction photovoltaic devices of $ITO/TiO_2/poly$(3-alkylthiophene)/Au, the photo current was characterized at different temperatures for different alkyl chain lengths and regioregularities: regiorandom, regioregular poly(3-hexylthiophene), and regioregular poly(3-dodecylthiophene). The regioregularity and alkyl chain length affected the photovoltaic characteristics due to differences in hole-carrier transportation. The drift charge mobilities of these devices were analyzed by the space-charge-limited current theory using the relation between the dark current and the bias voltage. The photocurrent in the devices based on poly(3-alkylthiophene)s decreased rapidly below the temperature at which the drift charge mobility was $10^{-5}\;cm^2/V{\cdot}s$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.575-578
• /
• 2002

In this work, the electrical characteristics of organic thin film transistors with the surface-treated organic gate insulator have been studied. For the surface treatment, the photoalignment technique was used. The field effect mobilities of the devices with PVP gate insulator was improved about ten times as high as those of TFTs without the insulator surface treatment.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.378-381
• /
• 2001

The electron drift mobility of poly(4,4'-cyclohexylidenediphenyl carbonate) (PC-Z) doped with 3,5-dimethy-3,5-di-t-butylstilbenequinone(MBSQ), 3,5,3,5-tetra-t-butyl stilbenequinone(TBSQ) and 3,5,3,5-tetra-methyl stilbenequinone(TMSQ) was measured by the time-of-flight technique. The electric field and temperature dependences of the electron drift mobility were discussed with Poole-Frenkel, Arrhenius formulations and non-Arrhenius type of temperature dependence. It was assumed that the hopping sites were Gaussian distribution. Mobility and activation energy of MBSQ were increased with increasing dopant. However, mobilities and activation energy of TBSQ and TMSQ were increased and decreased, respectively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.47-48
• /
• 2005

The moving photocarrier grating(MPG) technique for the determination of the carrier mobilities and the recombination lifetime in a-Se:As films have been studied. The electron and hole drift mobility and the recombination lifetime of a-Se films with arsenic (As) additions have been obtained. We have found an increase in hole drift mobility and recombination lifetime, especially when 0.3% As is added into a-Se film. However, the electron mobility exhibits no observable change up to 0.5% As addition in a-Se films.0.3% As added a-Se film also exhibits the maximum short circuit current densities per laser intensity of $5.29\times10^{-7}$ A/W.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.252-253
• /
• 2005

The effects of As addition in amorphous selenium (a-Se) films on the carrier mobilities and the recombination lifetime have been studied using the moving photo-carrier grating (MPG) measurements. The electron and hole mobility, and recombination lifetime of a-Se films with arsenic (As) additions up to 1% have been obtained. We have found an increase in hole drift mobility and recombination lifetime, especially when 0.3% As is added into a-Se film, whereas electron mobility decreases with As addition due to the defect density from shallow traps.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 1998년도 가을 학술발표논문집 Vol.25 No.2 (2)
• /
• pp.665-667
• /
• 1998

자동화 설계의 합성 과정 중에서 스케쥴링은 설계되는 하드웨어의 면적과 실행 시간을 결정하는 중요한 단계이다. 본 논문에서는 논문[8]의 방법으로 모든 연산의 배정 가능 범위를 축소하였으나 스케쥴링이 종료되지 않을 때 현재의 스케쥴링 상황을 매개변수로 표현하여 임의의 연산 배정 범위를 축소하기 위한 선택 함수를 제안한다. 제안한 방법에서는 배정 가능 범위가 가장 큰 연산의 ASAP 또는 ALAP중의 하나를 항상 선택하는데, 그러한 연산이 2개 이상인 경우에는 임의의 연산의 ASAP 또는 ALAP을 선택하여 축소하는 경우에 모든 연산의 배정 가능 범위의 변화량, 임의의 연산을 ASAP 또는 ALAP에 고정하였을 때 자원 제약과 그 연산의 종속성에 의한 다른 연산들의 이동 변화량, 그리고 각 파티션에 연산들의 배정을 균등하게 하는 정보를 사용하여 연산의 ASAP 또는 ALAP중에 하나를 선택한다. 이 알고리즘의 성능 평가는 5차 엘립틱 웨이브 필터를 벤치마크로 사용하였으며, 실험 결과는 모든 엘립틱 웨이브 필터에 대해 최적이었다.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제5권5호
• /
• pp.332-339
• /
• 2000

Experimental and theoretical works were performed for the separation of large polyelectrolytes such as DNA in the column packed with gel particles under an electric field. This paper shows how intraparticle convection effects the separation of DNAs in the column because DNAs quickly oriented through the pores in the field direction. Dimensionless transient mass balance equations were derived considering diffusion and electrophoretic convection. The separation criteria is theoretically studied using two different Peclet numbers in the fluid and solid phases and these criteria were verified uing two different DNAs by electrophoretic mobilities measured experimentally, showing how the separation position of DNAs varies in the column according to values of Pe(sub)f/Pe(sub)g of individual DNA. Governing equations are simultaneously solved by operator theoretic and characteristic methods to yield the column response.