• Title/Summary/Keyword: Mobile handset

Search Result 194, Processing Time 0.027 seconds

Design and Implementation of UWB Antenna with Dual Band Rejection Characteristics for Mobile Handset (단말기용 이중 대역저지 특성을 가지는 초광대역 안테나 설계 및 구현)

  • Cho, Young Min;Yang, Woon Geun
    • Journal of IKEEE
    • /
    • v.20 no.1
    • /
    • pp.68-74
    • /
    • 2016
  • In this paper, we present a compact planar dual band rejection Ultra Wide Band(UWB) antenna with folded parasitic element. The proposed antenna is consist of a hexagonal planar radiation patch antenna with a folded parasitic element which is located over the top and bottom surface. In contrast with other antenna which rejects single band using one method, folded parasitic element rejects dual band using one simple structure. Owing to folded parasitic element, dual-rejected properties are achieved in the Worldwide Interoperability for Microwave Access(WiMAX), C-band, and Wireless Local Area Network(WLAN) bands. The bandwidth of the proposed antenna was measured as 3.1~10.6 GHz for voltage standing wave ratio(VSWR) less than 2, except for the dual rejection bands of 3.4~4.2 GHz and 5.15~6.00 GHz.

A Study on a Location Determination System using Infrastructure Information of a WLAN Network (무선랜 네트워크의 인프라 정보를 이용한 위치측위 시스템에 관한 연구)

  • Lim, Joong-Seon;Choi, Gyung-Hyun
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.10 no.6
    • /
    • pp.98-107
    • /
    • 2011
  • In this paper, we propose the location determination system of an agent mobile device using the information provided by the WLAN(Wireless LAN) infrastructure. This system is configured as a typical ESS(Extended Service Set)-type WLAN structure with real-time location positioning engine and thru AP(Access Point) controller. The positioning engine collects the information of agent devices using SNMP(Small Network Management Protocol) thru AP controller and utilize those information as Cell ID. for LBS(Location Based Service). In the result of a real office environment implementation, the average success rate of inter-AP roaming is measured to 62.5% and the duration time of the device information update within the AP is average of 11 second of time, which means this system is adaptable to the location based service of above average accuracy but somewhat less urgency.

Development of GPS Baseband Chip (GPS Baseband Chip 개발)

  • Cho, Jae-Bum;Lee, Tae-Hyoung;Lee, Yoon-Jick;Heo, Jung-Hun;Jung, Hwi-Sung;Jeong, Jun-Young;Yoon, Suk-Ki;Kim, Hak-Soo;Cho, Dong-Sik;Choi, Hoon-Soon
    • Proceedings of the KIEE Conference
    • /
    • 2003.07d
    • /
    • pp.2313-2315
    • /
    • 2003
  • This paper presents the development methods which Samsung GPS baseband chip is called S3E4510X. Specification of S3E4510X and design methodology of baseband architecture is presented with a study of their effects. Also GPS core block and software are described in detail. We designed and implemented the test board with RF module for evaluating performance via static test dynamic test and each performance factors using live signal and CPS simulator. Test results show that our development GPS baseband chip have effectively performance for mobile handset Location Based Service (LBS) and its practical use for navigation.

  • PDF

The Effect of New Revenue Recognition Standard on Telecom Firms' Financial Reporting : Focusing on Regulatory Accounting (새로운 수익인식기준이 통신사업자의 재무보고에 미치는 영향 : 규제회계를 중심으로)

  • Chon, Mi-Lim;Jung, Jin-Hyang;Lee, Tae-Hee
    • Journal of Digital Convergence
    • /
    • v.17 no.11
    • /
    • pp.163-170
    • /
    • 2019
  • A new revenue recognition standard was adopted in 2018. The purpose of this paper is to analyse how K-IFRS 1115 'Revenue from Contracts with Customers' affects the revenue recognition of the telecommunication firms and to suggest a regulatory policy for the telecommunications industry. It shows identifying performance obligations for bundles, determining the transaction price and allocating the transaction price to the performance obligation and how to account for it using case study. The most important change in the telecommunication companies's revenue is to allocate the transaction price to two performance obligations: telecom services and mobile handset sales. As a result, sales revenue are expected to drop en masse. This study provides important implications for the regulatory accounting policy of the telecommunications industry.

A study to detect and leaked personal information on the smartphone. (스마트폰 상에서의 개인정보 유출 탐지 모니터링 연구)

  • Kim, Wung-Jun;Park, Sang-Hwi;Park, Sang-No;Kim, Chang-Su;Jung, Hoe-Kyung
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2014.05a
    • /
    • pp.606-608
    • /
    • 2014
  • Recent smartphone users constantly increases, an increase in malicious applications smartphones indiscretions exists within the Terminal, through the deployment of privacy disclosure, Singh and other victims also are on the rise. A typical personal way to malicious code masquerading as a normal application and install it on the handset of my text message or a personal note, such as personal information, the certificate directory, is the way that leaked. Therefore, to obtain permission to attack the root Terminal event by collecting malware infections and respond to determine whether it is necessary for the technique. In this paper, check the features of a Smartphone in real time systems, to carry out a study on the application throughout the Terminal to collect my attack event analysis, malware infection can determine whether or not the mobile security monitoring system. This prevents a user's personal information and take advantage of the top and spill are expected to be on the field.

  • PDF

A Study on Application of DSS for enhancing 5G Coverage (5G 커버리지 개선을 위한 DSS 적용 방안 연구)

  • Seong-Gyoon, Park;Soong-Hwan, Ro
    • Journal of IKEEE
    • /
    • v.26 no.4
    • /
    • pp.693-704
    • /
    • 2022
  • 5G service uses mid-band (n78) than existing mobile communication frequencies, so it is necessary to improve 5G coverage by utilizing low-band frequencies below 2 GHz. To this end, the application of Dynamic Spectrum Sharing technology of LTE and 5G-NR system using most of the low-band frequencies is required. In this paper, signaling overhead factors for DSS application and RF issues for terminal implementation are derived, and signaling overhead ratios from the respective perspectives of 5G-NR and LTE for the 1.8GHz band (50MHz width) that can utilize wide-bandwidth among low-band frequencies are estimated. Also handset RF issues were analyzed. Based on the analysis results, if DSS technology using low band is applied, it is expected that excellent 5G service quality can be provided due to 5G coverage improvement when LTE traffic quickly migrates to 5G-NR.

Design of a Internal Loop Antenna for Multi-band Mobile Handset Applications (다중 대역 이동 통신 단말기용 내장형 루프 안테나 설계)

  • Lee Young-Joong;Lee Jin-Sung;Jung Byungwoon;Park Myun-Joo;Lee Byungje
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.16 no.9 s.100
    • /
    • pp.917-925
    • /
    • 2005
  • In this paper, the quad-band antenna for mobile handsets is proposed and developed. The operating frequency bands include GSM(880 MHz${\~}$960 MHz), GPS(1,575 MHz$\pm$10 MHz), DCS(1,710 MHz${\~}$l,880MHz), and PCS(1,850 MHz${\~}$l,990 MHz). The proposed antenna consists of a feed line, a shorting post, and a radiating element of the feed loop. The multi-band operation is achieved by using the fundamental and higher resonant modes of the radiating element. Based on analysis of the current distribution on the radiator, the resonant frequency of each mode can be adjusted by adding the different sizes of slots on the radiator. The radiator of the feed loop is designed to be symmetrical so that the energy is symmetrically distributed on the radiator, which results in omni-directional radiation pattern. The ground plane under the radiator is removed in order to improve the bandwidth. The measured impedance bandwidths are $10.1\%$ in GSM band(VSWR<2.5), $26.8\%$ in GPS band, and DCS/US-PCS bands(VSWR<2.5), respectively. The maximum gains on the H-plane of the fabricated antenna are measured about -0.37 dBi${\~}$2.55 dBi for all operating frequency bands.

A Design of Multi-Band Chip Antenna for Mobile Handsets (휴대단말기용 다중 대역 칩 안테나 설계)

  • Cho, In-Ho;Jung, Jin-Woo;Lee, Cheon-Hee;Lee, Yong-Hee;Lee, Hyeon-Jin;Lim, Yeong-Seog
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.19 no.4
    • /
    • pp.477-483
    • /
    • 2008
  • The paper introduces mobile handset multi-band chip antenna to be used on meander line PIFA structure and parasite patch. The proposed antenna uses an FR-4 substrate. The top layer is consist of meander lines PIFA structure to implement GSM900 and is connected with each rad and meander line on the via-hole for maximize space efficiency. The middle layer is designed with the signal line and gap to implement a DCS and PCS bands, the bottom layer which is added to a parasite patch on the ground can be show an adjust of frequency and impedance character by the connection of the radiators of middle layer and coupling. The fabricated antenna with the dimension of $28{\times}6{\times}4\;mm^3$. The ground plane a dimension of $45{\times}90\;mm$, designed by a commercial software CST simulator. The experimental results show that the bandwidth for(VSWR<3) is 90($875{\sim}965$) MHz in GSM900 band operation and 380($1,670{\sim}2,050$) MHz in DCS, PCS band operation. The maximum gains of antenna are 0.25 dBi, 3.65 dBi and 3.3 dBi at resonance frequencies and it has omni-directional pattern practically.

Design of a Multi-band Internal Antenna Using Half Wavelength Loaded Line Structure for Mobile Handset Applications (반파장 로디드 라인 구조를 이용한 이동 통신 단말기용 다중 대역 내장형 안테나 설계)

  • Shin Hoo;Jung Woo-Jae;Jung Byungwoon;Park Myun-Joo;Lee Byungje
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.16 no.12 s.103
    • /
    • pp.1179-1185
    • /
    • 2005
  • In this paper, novel internal antenna with its controllable resonant frequency is presented for triple-band or over mobile handsets. The operating range can include GSM(880${\~}$960 MHz), GPS(1,575$\pm$10 MHz), DCS(1,710${\~}$1,880 MHz), US-PCS(1,850${\~}$l,990 MHz), and W-CDMA(1,920${\~}$2,170 MHz). The proposed antenna is realized by combination of a half wavelength loaded line and a shorted monopole. A single shorting and feeding points are used and they are common to both antenna structures. By controlling a value of lumped inductance element between shorting point and ground plane, the antenna provides enough bandwidth to cover DCS, US-PCS, and W-CDMA respectively. When these higher bands are controlled by the values of inductance, resonant characteristics in GSM and GPS bands are maintained. In this work, maximum value of the inductor is limited within 3.3 nH to mitigate gain degradation from frequency tuning. As a result, measured maximum gain of antenna is -0.58${\~}$-0.30 dBi in the GSM band, -0.57${\~}$0.43 dBi in the GPS band and 0.38${\~}$1.15 dBi in the DCS/US-PCS/W-CDMA band. In higher band, the proposed antenna is certified that resonant frequency of about 240 MHz can be effectively controlled within gain variation of about 0.77 dB by simulation and measurement.

Combined Image Retrieval System using Clustering and Condensation Method (클러스터링과 차원축약 기법을 통합한 영상 검색 시스템)

  • Lee Se-Han;Cho Jungwon;Choi Byung-Uk
    • Journal of the Institute of Electronics Engineers of Korea CI
    • /
    • v.43 no.1 s.307
    • /
    • pp.53-66
    • /
    • 2006
  • This paper proposes the combined image retrieval system that gives the same relevance as exhaustive search method while its performance can be considerably improved. This system is combined with two different retrieval methods and each gives the same results that full exhaustive search method does. Both of them are two-stage method. One uses condensation of feature vectors, and the other uses binary-tree clustering. These two methods extract the candidate images that always include correct answers at the first stage, and then filter out the incorrect images at the second stage. Inasmuch as these methods use equal algorithm, they can get the same result as full exhaustive search. The first method condenses the dimension of feature vectors, and it uses these condensed feature vectors to compute similarity of query and images in database. It can be found that there is an optimal condensation ratio which minimizes the overall retrieval time. The optimal ratio is applied to first stage of this method. Binary-tree clustering method, searching with recursive 2-means clustering, classifies each cluster dynamically with the same radius. For preserving relevance, its range of query has to be compensated at first stage. After candidate clusters were selected, final results are retrieved by computing similarities again at second stage. The proposed method is combined with above two methods. Because they are not dependent on each other, combined retrieval system can make a remarkable progress in performance.