• Journal of Ocean Engineering and Technology
• /
• v.23 no.2
• /
• pp.1-7
• /
• 2009

This paper presents a sliding mode controller based on Ackermann's formula and applies it to stabilizing a two-wheeled mobile inverted pendulum in equilibrium. The mobile inverted pendulum is a system with an inverted pendulum on a mobile cart. The dynamic modeling of the mobile inverted pendulum was established under the assumptions of a cart with no slip and a pendulum with only planar motion. The proposed sliding mode controller was based upon a class of nonlinear systems whose nonlinear part of the modeling can be linearly parameterized. The sliding surface was obtained in an explicit form using Ackermann's formula, and then a control law was designed from reachability conditions and made the sliding surface attractive to the equilibrium state of the mobile inverted pendulum. The proposed controller was implemented in a Microchip PIC16F877 micro-controller. The developed overall control system is described. The simulation and experimental results are presented to show the effectiveness of the modeling and controller.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.7
• /
• pp.656-663
• /
• 2007

A new dynamic balancing algorithm has been proposed to minimize the number of sensors necessary for the horizontal balancing of the mobile inverted pendulum while maintaining the same level of the commercial performance. The inverted pendulum technique is getting attention and there have been many researches on the Segway since the US inventor Dean Kamen commercialized. One of the major problems of the Segway is that many sensors are required for the control of the Segway, which results in the high price. In this research, a single gyro and a tilt sensor are fused to obtain the absolute tilt information, which is applied for the control of the mobile inverted pendulum. A dynamic balancing technique has been developed and applied for a robust control system against disturbances. The intelligent handling and stable curving of the Segway as a next generation mobile tool are verified with a human loading.

• The Journal of Korea Robotics Society
• /
• v.4 no.4
• /
• pp.289-297
• /
• 2009

This paper presents the development and control of a two wheeled car-like mobile robot using balancing mechanism whose heading control is done by turning the handle. The mobile inverted pendulum is a combined system of a mobile robot and an inverted pendulum system. A sensor fusion technique of low cost sensors such as a gyro sensor and a tilt sensor to measure the balancing angle of the inverted pendulum robot system accurately is implemented. Experimental studies of the trajectory following control task has been conducted by command of steering wheel while balancing.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.2
• /
• pp.171-176
• /
• 2013

In this research a Self-Standable mobile Robot with standing arms based on an Wheeled Inverted Pendulum is developed. Almost existing mobile robots have wide planar shape that is statistically stable and it is sometimes hard for them to run or steer on a narrow road. A Wheeled Inverted Pendulum based mobile robot has vertical shape that is upright-running and easily steering on a narrow road. It, however, requires actively balancing control and never restores the shape once it falls down. This research develops a Self-Standable mobile robot which equips standing arms and is able to change its chassis' posture freely from planar to vertical shape or vice versa.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.5
• /
• pp.440-445
• /
• 2010

This paper proposes a single accelerometer sensor control algorithm to mobile inverted pendulum, generally called 'Segway', and evaluates the performance of this system comparing to the conventional ones. The commercialized 'Prototype Segway-PT' is initially considered as a next-generation transport vehicle. However, this robot is operated by three gyroscopes and two accelerometers to control the posture and speed, and it requires the complex signal processing for fusing the two sets of data. As the result of this, the growth rate of market size of 'Segway' is slow because of its high price mainly. In this paper, the mobile inverted pendulum is operated by a single accelerometer to simplify the control system to lower the price. Low pass filter is one of the good sensors to reducing the variation of an accelerometer, but it has time delay. This time delay disturbs real-time mobile inverted pendulum control. Like this, other various algorithms are used for this system, but each one has its own weak point. So this paper proposes a new filtering method, median filter and EKF. Median filter is used to image processing to reject impulse elements like salt and pepper noise. As the major performance evaluation parameter for the accelerometer, the high-frequency to low frequency ratio from FFT (Fast Fourier Transform) is used. Effectiveness of the proposed algorithms has been verified through the real experiments and the results are demonstrated.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.06a
• /
• pp.715-716
• /
• 2008

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.3
• /
• pp.240-247
• /
• 2013

This paper proposes an optimal three-dimensional coordinate implementation of the vision sensor using two CCD cameras. The PBVS (Position based visual servoing) is implemented using the positional information obtained from images. Stereo vision by PBVS method that has enhanced every frame using calibration parameters is effective in the distance calculation. The IBVS (Image based visual servoing) is also implemented using the difference between reference and obtained images. Stereo vision by IBVS method calculates the distance using rotation angle of motors that correspond eyes and neck without enhanced images. The PBVS method is compared with the IBVS method in terms of advantages, disadvantages, computing time, and performances. Finally, the IBVS method is applied for the dual arm manipulator on the mobile inverted pendulum. The autonomous mobile inverted pendulum is successfully demonstrated using the center of the manipulator's mass.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.7
• /
• pp.157-163
• /
• 2011

In this paper, configuration control for the Horizontal Maintenance and driving of the mobile inverted pendulum robot has been studied using ARS(Attitude Refrence System). The inverted pendulum technique is getting attention and there have been many researches on the seg-way since the US. Using its 2 freedom, a mobile inverted pendulum robot can move in various modes and Our robot performs goal reaching ARS. Mobile inverted pendulum robot fall down to the forward or reverse direction to converge to the stable point. Kalman Filter is normally used for the algorithm and numerous research is progressing at the moment. To calculate the attitude in ARS using 2 axis gyro(roll, pitch) and 3 axis accelerometers (x, y, z). In this paper we present a two wheel robot system for an autonomous mobile robot. This paper realized the robot control method which is much simpler but able to get desired performance by using the IMU and PID control.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.15 no.2
• /
• pp.126-131
• /
• 2015

Studies on the control of inverted pendulum type systems have been widely reported. This is because this type of system is a typical complex nonlinear system and may be a good model to verify the performance of a proposed control system. In this paper, we propose the design of two fuzzy logic control systems for the control of a Segway mobile robot which is an inverted pendulum type system. We first introduce a dynamic model of the Segway mobile robot and then analyze the system. We then propose the design of the fuzzy logic control system, which shows good performance for the control of any nonlinear system. In this paper, we here design two fuzzy logic control systems for the position and balance control of the Segway mobile robot. We demonstrate their usefulness through simulation examples. We also note the possibility of simplifying the design process and reducing the computational complexity. This possibility is the result of the skew symmetric property of the fuzzy rule tables of the system.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.1
• /
• pp.49-55
• /
• 2020

This paper presents the system modeling, analysis, and controller design and implementation with a inverted pendulum system in order to test Linear Quadratic control based robust algorithm for inverted pendulum robot. The balancing of an inverted pendulum robot by moving pendulum robot like as 'segway' along a horizontal track is a classic problem in the area of control. This paper will describe two methods to swing a pendulum attached to a cart from an initial downwards position to an upright position and maintain that state. The results of real experiment show that the proposed control system has superior performance for following a reference command at certain initial conditions.