• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.2B
• /
• pp.97-109
• /
• 2012

In this paper, we propose a modulation scheme for a network-coded bi-directional relaying (NBR) system over an asymmetric channel, which means that the qualities of the relay channel (the link between the BS and RS) and access channel (the link between the RS and MS) are not identical. The proposed scheme employs a dual constellation in such a way that the RS broadcasts the network-coded symbols modulated by two different constellations to the MS and BS over two consecutive transmission intervals. We derive an upper bound on the average bit error rate (BER) of the proposed scheme, and compare it with the hybrid constellation-based modulation scheme proposed for the asymmetric bi-directional link. Furthermore, we investigate the channel utilization of the existing bi-directional relaying schemes as well as the NBR system with the proposed dual constellation diversity-based modulation (DCD). From our simulation results, we show that the DCD gives better average BER performance about 3.5~4dB when $E_b/N_0$ is equal to $10^{-2}$, while maintaining the same spectral efficiency as the existing NBR schemes over the asymmetric bi-directional relaying channel.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.343-346
• /
• 2012

Today, According to it widely used that third generation mobile networks service, WCDMA module development technology and its utilization is expanding increasingly and thus to IT Convergence industries is a trend that a lot of appears. This paper, OBD-II communications to bring a vehicle information use and data to an external server transfer and it was developed that vehicle status monitoring from other external devices can be system. From the various sensors inside a vehicle using the OBD-II connector read the information, after converting the user easier to see, WCDMA module using the car status monitoring system to transfer to an external data server was implemented. Developed to test the performance of the system using virtual's state vehicle simulator, which occurs in the real car that will generate the data. It was sent to the OBD-II connector to be occurred data, vehicle status monitoring system was confirmed that Data was received without error. In addition, When this data using WCDMA transmit data to an external server the same data was confirmed that it was received without error. In the future, this technology using the OBD-II vehicle IT convergence technology can be used in a wide range.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.9
• /
• pp.802-810
• /
• 2012

This paper describes RFID(Radio Frequency Identification) based target acquisition and docking system. RFID is non-contact identification system, which can send relatively large amount of information using RF signal. Robot employing RFID reader can identify neighboring tag attached objects without any other sensing or supporting systems such as vision sensor. However, the current RFID does not provide spatial information of the identified object, the target docking problem remains in order to execute a task in a real environment. For the problem, the direction sensing RFID reader is developed using a dual-directional antenna. The dual-directional antenna is an antenna set, which is composed of perpendicularly positioned two identical directional antennas. By comparing the received signal strength in each antenna, the robot can know the DOA (Direction of Arrival) of transmitted RF signal. In practice, the DOA estimation poses a significant technical challenge, since the RF signal is easily distorted by the surrounded environmental conditions. Therefore, the robot loses its way to the target in an electromagnetically disturbed environment. For the problem, the g-filter based error correction algorithm is developed in this paper. The algorithm reduces the error using the difference of variances between current estimated and the previously filtered directions. The simulation and experiment results clearly demonstrate that the robot equipped with the developed system can successfully dock to a target tag in obstacles-cluttered environment.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.3
• /
• pp.33-41
• /
• 2007

Owing to the development of multimedia and communication technologies, multimedia data become a common feature of the information systems and are on the increase. This has led to the need of 3D shape retrieval systems that, given a query object, retrieve similar 3D objects. Therefore, shape descriptor required to describe a 3D object effectively and efficiently. In this paper, a new descriptor for 3D model retrieval based on shape information is proposed. The proposed descriptor utilizes the curvedness together with the shape index that provides local geometry information. The existing 3D Shape Spectrum Descriptor (3D SSD), which is defined as the histogram of shape index values, represents the characteristics of local shapes of the 3D surface. However, it does not properly represent the local shape characteristics, because many points with different curvedness may have the same shape index value. Therefore, we add a new feature that represents the degree of curvedness, thereby improving the discriminating power of the shape descriptor. We evaluate the performance of the proposed method, compared with the previous method. The experimental results have shown that the performance of retrieval has been improved by 23.6%.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.11
• /
• pp.1446-1455
• /
• 2016

The recent increase of fresh farm products, hazardous cargos, and high-priced goods in marine transportation has caused an increased demand of cargo owners and shipping companies with regard to the monitoring of the location and state of cargo. To meet this increase, numerous technologies are being studied for the monitoring of the cargo state. Cargo containers on a ship are loaded on a ship's deck and in a ship's hold, which is located under the deck. However, Since the developed technologies mostly transfer the container status information that collected by mobile communication, it costs a lot to install communication infrastructure on ship. And the ship's hold is completely sealed with a cover, and communication with the reader positioned at the ship's bridge is difficult. Therefore, most existing studies on container monitoring on ships have focused on the monitoring of containers loaded on a ship's deck. Accordingly, this study suggested system configuration for the monitoring of containers in a ship's hold using IP-RFID technology. The suggested system configuration was tested on an actual ship under navigation, and the test results are given in this study. The test results verified that the monitoring of containers in a ship's hold using IP-RFID technology is effective.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.11
• /
• pp.2218-2229
• /
• 2015

Recently Wi-Fi Alliance defined Wi-Fi direct, which can communicate through a direct connection between the mobile device anytime, anywhere. In Wi-Fi direct, all devices are categorized by group of owner (GO) and client. Since portability is emphasized in Wi-Fi direct devices, it is essential to control the energy consumption of a device very efficiently. In order to avoid unnecessary power consumed by GO, Wi-Fi direct standard defines two power management schemes: Opportunistic power saving scheme and Notice Of Absence (NOA) scheme. But, these two schemes do not consider the traffic pattern, so we cannot expect high energy efficiency. In this paper, we suggest an algorithm to enhance the energy efficiency of Wi-Fi direct power saving, considering the characteristics of multimedia video traffic. Proposed algorithm utilizes the statistical distribution for the size of video frames and adjusts the length of awake interval dynamically. Also, considering the inter-dependency among video frames, the proposed algorithm assigns priorities to video frames and ensures that a video frame with high priority is transmitted with higher probability than other frames with low priority. Simulation results shows that the proposed method outperforms the traditional NOA in terms with average delay and energy efficiency.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.12
• /
• pp.2450-2460
• /
• 2015

Recently, as interest in IoT (Internet of Things) increase, research and standardization of a new protocol which reflects the characteristics of IoT has progressed. Among them, RPL(IPv6 for Low-Power Lossy Network) is a standardized routing protocol for IoT. RPL utilizes DIO (DODAG Information Object) messages which is flooded from the sink node to the whole network for path establish and maintenance. However, in large scale networks, not only a long time is required to propagate the DIO message to the whole networks but also a bottleneck effect around the sink node is occurred. Multi-sink based approaches which take advantage of reducing routing overhead and bottleneck effect are widely used to solve these problems. In this paper, we define 'unnecessary path update problems' that may arise when applying the RPL protocol to the multi sink based IoT networks and propose two methods namely Routing Metric based Path Update Decision method and Immediate Successor based Path Update Decision method for selective routing update.

• Journal of Internet Computing and Services
• /
• v.12 no.4
• /
• pp.181-194
• /
• 2011

Server push which is technology of sending contents from servers to browsers in real time using long polling requests enables real time bidirectional communications between servers and browsers in HTTP environment. Recently, thanks to the rapid supply of mobile devices having ability of full browsing, server push is being applied to various applications. However, because servers providing services should offer distributed contents to a large number of users simultaneously in various user environments, they have a burden that offers contents quickly distinguishing much more concurrent users than before. The method of message exchange so far achieved in distributed server environment has difficulties in the performance of simultaneous user request process, the identification of users and the contents delivery. In this paper, We proposed message exchange architecture between servers for offering server push in the distributed server environment. The proposed architecture enables message exchange in the method of push between servers based on event driven architecture. In addition, the proposed architecture enables flexible identification of a event agent and event processing under the connected environment of a lot of users. In this paper, we designed and implemented the proposed architecture and compared performance with the previous way through a performance test. In addition, function is confirmed through the case realization. As a result of the performance test, the proposed architecture can lessen the use of server Thread and response time of users and increase simultaneous throughput.

• Communications of Mathematical Education
• /
• v.31 no.3
• /
• pp.241-255
• /
• 2017

The 4th industrial revolution is coming. In order to prepare for the new learning environment with it, we may need digital mathematics textbooks that fully utilize all possible technologies. So various attempts have been made in elementary and middle school mathematics education. However, despite the importance of higher mathematics, we haven't seen a best possible math digital textbooks yet in Korea. In this paper, we introduce our new model of interactive math digital textbook about Linear Algebra/ Calculus/ Differential Equations/ Statistics/ Engineering Math. Especially, this manuscript focuses on our experience of using digital contents and interactive labs for developing a new model for linear algebra digital textbook. We introduce our works on linear algebra digital textbooks which include pdf e-book, web contents, video clips of lectures, interactive lab. Using this linear algebra digital textbook, students can freely use any mobile devices to access diverse learning materials, lessons, and hands-on exercises without any limitations. Also, times saved in the computation, coding, and typing process can be used to have more discussions for deeper understanding of mathematical concepts. This type of linear algebra digital textbook, which contains all interactive free cyber-lab with codes and all lectures for each sections, can be considered as a new model for the next generation of math digital textbook.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.6_1
• /
• pp.463-469
• /
• 2013

In addition to the VRS-RTK service, FKP-RTK service launched recently in Korea however unlike VRS, it is not yet applied to various surveying tasks. VRS system is operated in two way communication over the mobile Internet. When user send rover position data to network RTK server and the server provides correction data to users continuously. It causes to increase communications load and makes delaying or failure in data transmission depends on server capacity and number of concurrent users. In contrast, since FKP system is one way communication system, user only receives correction data and area correction parameters for the selected Continuous Reference Station from the server. Thus, there is no limitation to the number of concurrent users in FKP system and it would be more efficient than VRS system in terms of economic. To this end, we performed FKP-RTK test for Unified Control Points and Urban Control Points where are located at 5 regions in Korea to evaluate the accuracy. As a result, almost of FKP positioning data are in error range of ${\pm}6.2cm$ in horizontal and it would be enough for construction survey such as for earth work in limited except precise structure survey.