• The KIPS Transactions:PartA
• /
• v.14A no.7
• /
• pp.391-398
• /
• 2007

In this paper, we design a future mobile camera standard interface based on the MIPI CSI-2 and D-PHY specification. The proposed CSI-2 have the efficient multi-lane management layer, which the independent buffer on the each lane are merged into single buffer. This scheme can flexibly manage data on multi lanes though the number of supported lanes are mismatched in a camera processor transmitter and a host processor. The proposed CSI-2 & D-PHY are verified under test bench. We make an experiment on CSI-2 & D-PHY with FPGA type test-bed and implement them onto a mobile handset. The proposed CSI-2 & D-PHY module are used as both the bridge type and the future camera processor IP for SoC.

• Journal of Broadcast Engineering
• /
• v.16 no.4
• /
• pp.602-613
• /
• 2011

In this paper, we propose a hybrid stereoscopic camera system which acquires and utilizes stereoscopic images from two different camera modules, the main-camera module and the sub-camera module. Hybrid stereoscopic camera can effectively reduce the price and the size of a stereoscopic camera by using a relatively small and cheap sub-camera module such as a mobile phone camera. Images from the two different camera modules are very different from each other in aspects of color, angle of view, scale, resolution and so on. The proposed system performs an efficient hybrid stereoscopic image registration algorithm that transforms hybrid stereoscopic images into normal stereoscopic images based-on camera geometry. As experimental results, the registered stereoscopic images and applications of the proposed system are shown to demonstrate the performance and the functionality of the proposed camera system.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2000.10a
• /
• pp.39-45
• /
• 2000

A small camera module fabricated by including bare chip bonding methods is utilized to realize advanced mobile devices. One of the driving forces is the TOG (Tape On Glass) bonding method which reduces the packaging size of the image sensor clip. The TOG module is a new thinner and smaller image sensor module, using flip chip interconnection method with the ACP (Anisotropic Conductive Paste). The TOG production process was established by determining the optimum bonding conditions for both optical glass bonding and image sensor clip bonding lo the flexible PCB. The bonding conditions, including sufficient bonding margins, were studied. Another bonding method is the flip chip bonding method for DSP (Digital Signal Processor) chip. A new AC\ulcorner was developed to enable the short resin curing time of 10 sec. The bonding mechanism of the resin curing method was evaluated using FEM analysis. By using these flip chip bonding techniques, small camera module was realized.

• Proceedings of the Korea Contents Association Conference
• /
• 2007.11a
• /
• pp.482-486
• /
• 2007

Industry for mobile camera module is a complex one based on various technologies, including mechanics, communication technology, material engineering, and electronics which are connected closely. This industry has been already known to a higher value-added business, and as going into an aging society, is expected a market growth. Also, it is a knowledge based component industry and each components assembled into product is almost home made items. This characteristics made many small and medium and venture enterprises participate in this area. Using this study, related companies refer the status and make the decision for commercialize the technology in the internal and world market.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.252-254
• /
• 2004

This paper proposes a common platform for an internet-based mobile robot and its operator terminal. The common platform can reduce the cost and time to develop an internet-based robot and its operator terminal. The robot performs the role of a server and its terminal a client. One operator can use this terminal to make a command and this command can be sent to the robot through a wireless network. According to given commands, the robot moves a point and sends an image by using a camera or desired information by using other sensors. The information sent from the robot can help an operator to control the robot. The mobile robot consists of two modules, main module and motion module. Main module can exchange information with the operator terminal, process information, and send a command to motion module. Each application program for one internet-based mobile robot and its operator terminal will be developed to show that the same platform can be used for them. Also, it will be shown that the robot can be controlled easily by using its operator terminal.

• Journal of the Optical Society of Korea
• /
• v.13 no.2
• /
• pp.206-212
• /
• 2009

This study presents the compact zoom lens with a zoom ratio of 5x for a mobile camera by using a prism. The lens modules and aberrations are applied to the initial design for a four-group inner-focus zoom system. An initial design with a focal length range of 4.4 to 22.0 mm is derived by assigning the first-order quantities and third-order aberrations to each module along with the constraints required for optimum solutions. We separately designed a real lens for each group and then combined them to establish an actual zoom system. The combination of the separately designed groups results in a system that satisfies the basic properties of the zoom system consisting of the original lens modules. In order to have a slim system, we directly inserted the right-angle prism in front of the first group. This configuration resulted in a more compact zoom system with a depth of 8 mm. The finally designed zoom lens has an f-number of 3.5 to 4.5 and is expected to fulfill the requirements for a slim mobile zoom camera having high zoom ratio of 5x.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.803-807
• /
• 2003

Tele-operation and remote monitoring techniques are essential and important technologies for performing the inspection and repair tasks effectively in nuclear power plants. This paper presents the application of a mobile robot for the remote monitoring and inspection of the Calandria faces, where human access is limited because of the high-level radioactive environments during full power operation. The mobile robot was designed with reconfigurable crawler type of wheels attached on the front and rear side in order to pass through the ditch. The extendable mast, mounted on the mobile robot, can be extended up to 8 m vertically. This robot was also equipped a visible CCD/thermal infrared inspection head module and a stereo camera module for the enhancement of visual inspection.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.5
• /
• pp.135-142
• /
• 2013

With a rapid growth of hardware and product material industries, evolution of handheld terminal technologies is progressed. Various applications using mobile phone are the major trend in recent smart applications. Especially, interesting applications using camera module in a smartphone are developed continuously, mobile users are able to use various useful mobile applications nowadays. In this paper, we design and implement smartphone app for measuring real size of the shooting object in the image taken by a camera module in a smartphone precisely. We implement 4 different shooting modes for precise measurement of objects and 0 point control module is developed to minimize the differences of shooting images taken by different types and systems of various smartphones. The smartphone app proposed and implemented in this paper is analyzed and evaluated by a simulation study.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.3
• /
• pp.68-72
• /
• 2009

Millions of landmines still have been buried in various countries around the world. Unfortunately, landmines make the correct detection of humanitarian organizations very difficult. For this purpose, new technologies such as improved sensors, efficient manipulators and mobile robots are needed. Our effort is to develop a small mobile robot for landmine detection. The mobile robot consists of sensor module, GPS, RF communications equipment, IR camera, motors, and controllers, etc. This paper describes the current configuration of development in landmine detecting tracked robot. Specifically we are concerned with the sensor module of the mobile robot. Our results show that graphs have measured a small metal instead of a real landmine because of the big danger of students experiments on detection with real landmines.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.1
• /
• pp.115-123
• /
• 2002

In this paper, we present two types of vision algorithm that mobile robot has CCD camera. for obstacle avoidance and path plan. One is simple algorithm that compare with grey level from input images. Also, The mobile robot depend on image processing and move command from PC host. we has been studied self controlled mobile robot system with CCD camera. This system consists of TMS320F240 digital signal processor, step motor, RF module and CCD camera. we used wireless RF module for movable command transmitting between robot and host PC. This robot go straight until 95 percent filled screen from input image. And the robot recognizes obstacle about 95 percent filled something, so it could avoid the obstacle and conclude new path plan. Another is complex algorithm that image preprocessing by edge detection, converting, thresholding and image processing by labeling, segmentation, pixel density calculation.