• Journal of Broadcast Engineering
• /
• v.25 no.6
• /
• pp.870-881
• /
• 2020

This paper presents cell ID (cell identity) detection schemes using PSS/SSS (primary synchronization signal/secondary synchronization signal) for 5G NR (new radio) system and evaluates the detection performance. In this paper, we consider two cell ID detection schemes, i.e. two-stage detection and joint detection schemes. The two-stage detection scheme consists of two stages which estimate a channel gain between a transmitter and receiver and detect the PSS and SSS sequences. The joint detection scheme jointly detects the PSS and SSS sequences. In addition, this paper presents coherent and non-coherent combining schemes. The coherent scheme calculates the correlation value for the total length of the given PSS and SSS sequences, and the non-coherent combining scheme calculates the correlation within each group by dividing the total length of the sequence into several groups and then combines them non-coherently. For the detection schemes considered in this paper, the detection error rates of PSS, SSS and overall cell ID are evaluated and compared through computer simulations. The simulation results show that the joint detection scheme outperforms the two-stage detection scheme for both coherent and non-coherent combining schemes, but the two-stage detection scheme can greatly reduce the computational complexity compared to the joint detection scheme. In addition, the non-coherent combining detection scheme shows better performance under the additive white Gaussian noise (AWGN), fixed, and mobile environments.

• Journal of Broadcast Engineering
• /
• v.27 no.2
• /
• pp.228-239
• /
• 2022

In this paper, we propose an unmanned vehicle scratch detection deep learning model for car sharing services. Conventional scratch detection models consist of two steps: 1) a deep learning module for scratch detection of images before and after rental, 2) a manual matching process for finding newly generated scratches. In order to build a fully automatic scratch detection model, we propose a one-step unmanned scratch detection deep learning model. The proposed model is implemented by applying transfer learning and fine-tuning to the deep learning model that detects changes in satellite images. In the proposed car sharing service, specular reflection greatly affects the scratch detection performance since the brightness of the gloss-treated automobile surface is anisotropic and a non-expert user takes a picture with a general camera. In order to reduce detection errors caused by specular reflected light, we propose a preprocessing process for removing specular reflection components. For data taken by mobile phone cameras, the proposed system can provide high matching performance subjectively and objectively. The scores for change detection metrics such as precision, recall, F1, and kappa are 67.90%, 74.56%, 71.08%, and 70.18%, respectively.

• Journal of Broadcast Engineering
• /
• v.26 no.4
• /
• pp.429-440
• /
• 2021

With the recent development of deep convolutional neural network learning, deep learning techniques applied to single image super-resolution are showing good results. One of the existing deep learning-based super-resolution techniques is RDN(Residual Dense Network), in which the initial feature information is transmitted to the last layer using residual dense blocks, and subsequent layers are restored using input information of previous layers. However, if all hierarchical features are connected and learned and a large number of residual dense blocks are stacked, despite good performance, a large number of parameters and huge computational load are needed, so it takes a lot of time to learn a network and a slow processing speed, and it is not applicable to a mobile system. In this paper, we use the residual dense structure, which is a continuous memory structure that reuses previous information, and the residual dense channel attention block using the channel attention method that determines the importance according to the feature map of the image. We propose a method that can increase the depth to obtain a large receptive field and maintain a concise model at the same time. As a result of the experiment, the proposed network obtained PSNR as low as 0.205dB on average at 4× magnification compared to RDN, but about 1.8 times faster processing speed, about 10 times less number of parameters and about 1.74 times less computation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.8
• /
• pp.18-25
• /
• 2020

With the development of water internet technology, data communication between objects is expanding. Research related to data communication technology between vehicles that incorporates related technologies into vehicles has been actively conducted. For data communication between mobile terminals, data stability, reliability, and real-time performance must be guaranteed. The 5 GHz Wi-Fi band, which is advantageous in bandwidth, communications speed, and wireless saturation of the wireless network, was selected as the data communications network between vehicles. This study analyzes how to design and implement a 5 GHz Wi-Fi network in a vehicle network. Considering the characteristics of the mobile communication terminal device, a continuous variable communications structure is proposed to enable high-speed data switching. We simplify the access point access procedure to reduce the latency between wireless terminals. By limiting the Transmission Control Protocol Internet Protocol (TCP/IP)-based Dynamic Host Configuration Protocol (DHCP) server function and implementing it in a broadcast transmission protocol method, communication delay between terminal devices is improved. Compared to the general commercial Wi-Fi communication method, the connection operation and response speed have been improved by five seconds or more. Utilizing this method can be applied to various types of event data communication between vehicles. It can also be extended to wireless data-based intelligent road networks and systems for autonomous driving.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.6
• /
• pp.26-36
• /
• 2009

ad-hoc network is self-constructed by mobile hosts without any infrastructure. And the hosts collaborate with each other for routing packet by means of multi-hop communication. But it is too hard to deploy ad hoc network at the large area because of the salability problem caused by low network throughput. network throughput decrease is due to contention on the air among the neighbor host and single interface limitation, and broadcast flooding through overall network. In this paper, to solve the ad hoc scalability problem, we propose mesh network based scalable hierarchical ad hoc architecture, and also propose the adaptation methods for inter-working with the host not including ad hoc functions and the legacy infra-network.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.11
• /
• pp.755-762
• /
• 2014

In recent year, along with the rapid development of LED technology, many applications using LEDs with Visible Light Communication(VLC) have been researched. Since it is easy to provide LOS communication environment along with cheap deployment cost, the indoor positioning system based on VLC has been actively studied. In this paper, we propose an accurate indoor positioning algorithm using a stereo image sensor and white-light LEDs with the visible light communication. Indoor white-light LEDs are located at the ceiling of a room and broadcast their position information by VLC technology. Mobile receiver with stereo image sensor receives LED position information by VLC and estimates its position and angle information. Simulation results are given to show the efficiency of proposed indoor positioning algorithm.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.8
• /
• pp.849-859
• /
• 2013

This paper explores the policy alternatives to promote efficient use of spectrums for public use and terrestrial broadcasting, which are essential to provide spectrum for mobile broadband services. To this end, recent overseas spectrum management policies are introduced and utilized to provide domestic policy alternatives. For the efficient use of spectrum for public use, policy alternatives such as detailed survey of current usage of spectrum for public use, levying the opportunity cost, installment of spectrum efficiency fund, providing incentives for the efficient use of spectrum for military use, and introduction of shared use are proposed. For the efficient use of spectrum for terrestrial broadcasting, short-term policy alternative such as change of contribution rate base of the broadcasting - telecommunications development fund is proposed. For long-term policy alternatives, change of spectrum provision from designation to allocation for the spectrum for commercial terrestrial broadcasting and introduction of administered incentive pricing to public terrestrial broadcasting are proposed.

• Journal of the Korea Convergence Society
• /
• v.6 no.4
• /
• pp.235-241
• /
• 2015

As the broadcast, tele communication and media technology develop, the media are divided into various specialities from the internet to the mobile device. An advertising creative in the field, an innovative changes are taking place that had not been in the era of the passed traditional media TV, newspaper, magazine and etc. It's not but the various media's dividing, also the consumers who use the media are evolving in their media behavior from a passive attitude to a positive one. In other words, They consumers receive the advertising messages with positive attitude to researching the message in the searching tool by themselves and participate, act, and diffuse their acknowledgements. In this thesis, as the advertising creative circumstance like this, these varied advertising creative are tried to explained by the three dimension module that is suggested in this thesis.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.12
• /
• pp.2614-2618
• /
• 2012

Recently, multimedia broadcasting traffic is explosively increasing since the performance of smartphones is significantly enhanced and capacity of mobile access network such as LTE is steeply increasing. We can accommodate the multimedia broadcasting traffic via general unicast scheme or eMBMS which is a broadcast-specific scheme. First, the unicast scheme provides higher spectral efficiency compared to the eMBMS. However, unfortunately, the efficiency of the unicast scheme dramatically decreases as the number of users increases. On the other hand, although the spectral efficiency of the eMBMS is lower than that of the unicast, it can serve many users with a channel. Thus, this paper defines and investigates the capacity efficiencies of the both schemes for multimedia broadcasting traffic. In addition, we derive the optimal number of users where the eMBMS can provide the higher capacity efficiency than that of the unicast scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.5B
• /
• pp.274-286
• /
• 2005

In this paper, we propose a new power-efficient and reliable connected dominating set based routing protocol in the mobile ad hoc networks. Gateway nodes must be elected in consideration of residual energy and mobility because frequent reconstruction of connected dominating set result in transmission error for route losses. If node density is high, it results in a lot of contentions and more delays for network congestion. Therefore, in this paper, we propose a new construction method of connected dominating set that supports reliable and efficient data transmission through minimizing reconstruction of connected dominating set by delaying neighbor set advertisement message broadcast in proportion to weighted sum of residual energy, mobility, and the number of neighbor nodes. The performance of the proposed protocol is proved by simulation of various conditions.