• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.7
• /
• pp.1415-1420
• /
• 2003

The mobile radio networks can be divided into networks that has the base station or the infrastructures like AP(Access Point) and Ad Hoc network that hasn't any infrastructures. As there aren't any fixed infrastructures in Ad Hoc Networks, mobile nodes should transmit the data oかy among mobile nodes themselves. To supplement these weakpoints of the two networks, many studies about Ad Hon based on the 802.11 are in progress. In this thesis, we try to propose the efficiency of the suggested protocols by comparing and analyzing power saving protocols according to the Beacon intervals in multi hop Ad Hoc Networks based on IEEE 802.11.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.8
• /
• pp.679-686
• /
• 2013

Power efficiency becomes more important in wireless LANs as the mobile stations send more data with limited batteries. It has been known that the IEEE 802.11 PSM is not efficient in high load networks: AP cannot deliver buffered packets to a PS station immediately and it can lead the station to stay in active state quite long and result in energy waste. Moreover, it is inefficient that only one data frame is retrieved by a PS-POLL frame. In this paper, we propose a time slotted scheme to enhance the PSM, in which a mobile station can reserve time slots to receive data frames. Our mechanism can reduce collisions by reservation and decrease the channel occupancy by transmitting multiple data frames via one PS-POLL. The analytic model and simulation results show that proposed scheme reduces power consumption significantly and enhances the performance of PSM.

• The KIPS Transactions:PartC
• /
• v.18C no.3
• /
• pp.187-194
• /
• 2011

IEEE 802.11 wireless LAN has become the center of attention for one of the most dominant wireless networking technologies nowadays. In densely deployed wireless LANs, mobile stations are exposed to a number of AP, thus it is needed to select the best AP to associate with. The most common approach is to select the AP with the highest received signal strength. However it does not consider traffic load imposed to each AP so that it may cause the poor network performance. Therefore, in this paper, we propose a throughput estimation scheme for neighboring APs by sniffing the traffic within 802.11 networks. We devise a tool, named "VirtFrame", which is to estimate the station's capable throughput from neighbor APs based on the channel access time by virtually combining the sniffed frames. Simulation results show that our proposed scheme well matches that there exists correlation between the channel access time and the actual throughput of the APs.

• Proceedings of the IEEK Conference
• /
• 2004.08c
• /
• pp.588-591
• /
• 2004

This paper describes a new approach to Internet host mobility. We argue that local mobility, the performance of existing mobile host protocol can be significantly improved. It proposes Fast Moving Detection scheme that based on neighbor AP channel information and moving detection table. And, it composes Local Area Clustering Path (LACP) domain that collected in AP's channel information and MN interface information. It stored the roaming table to include channel information and moving detection. Those which use the proposal scheme will need to put LACP information into the beacon or probe frame. Each AP uses scheme to inform available channel information to MN. From the simulation result, we show that the proposed scheme is advantageous over the legacy schemes in terms of the burst blocking probability and the link utilization.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.2
• /
• pp.537-542
• /
• 2016

The demand for LBS (Location Based Services) is increasing in the development of communication and mobile technologies. Positioning technology is a core technology for LBS, because LBS is based on a position of each device or user. But positioning technology especially for indoor environments is getting a lot of attention. Indoor positioning errors usually occur seriously in indoor environments where APs (Access Points) are set in a very concentrated and complex arrangement. In order to reduce indoor positioning errors, we adopt DOP (Dilution of Precision) which reflects an APs configuration information. In this paper, we propose an enhanced indoor positioning method using IEEE 802.11 RSSI measurements and AP configuration information.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.3 no.2
• /
• pp.42-50
• /
• 2004

This paper describes a new approach to Internet host mobility. We argue that local mobility, the performance of existing mobile host protocol can be significantly improved. It proposes Fast Moving Detection schemethat based on neighbor AP channel information and moving detection table. And, it composes Local Area Clustering Path (LACP) domain that collected in AP's channel information and MN interface information. It stored the roaming table to include channel information and moving detection. Those which use the proposal scheme will need to put LACP information into the beacon or probe frame. Each AP uses scheme to inform available channel information to MN. From the simulation result, we show that the proposed scheme is advantageous over the legacy schemes in terms of theburst blocking probability and the link utilization.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.1
• /
• pp.17-28
• /
• 2014

The increase of smartphone users have made mobile carriers offload increasingly congested traffic of 3/4G by providing Wi-Fi hot-spots in the public places such as coffee shops and subway stations. In the traditional authentication in WLAN, the users should convince the service providers that they are valid customers before they use WLAN services. Since the authentication protocol is designed for service providers. Even with the mutual authentication based on the IEEE 802.1X, which is supported by IEEE 802.11 standard, it is difficult to be convinced of that the service providers really have installed the WLAN APs, which users are confronted with. An attacker can install rogue APs that masquerade as legitimate APs by copying the SSID, MAC address, etc. in order to obtain users' private information. In this paper, we introduce a method of authenticating legitimate APs for smartphone users. And we show our proposal can be well utilized for the current Wi-Fi hot-spots as a security plug-in and prove it through our experiments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37B no.11
• /
• pp.1050-1057
• /
• 2012

Super Wi-Fi is a newly emerging wireless Internet technology, which constitutes Wi-Fi networks using TV white space. A key technical challenge in the Super Wi-Fi applications is how to provide a seamless Internet service even when a Super WiFi user should give up the channel in use to the active incumbent user which is activated in the same service area, preventing from the service continuity in Super Wi-Fi. In this paper, we propose a channel handover method to support service continuity of Super Wi-Fi, in which an AP selects a new operational channel and provides the channel information for MSs. Therefore, the AP and the MSs can carry out seamless handover for Super Wi-Fi service. A performance evaluation shows that the proposed scheme is superior to the conventional Wi-Fi in channel mobility delay.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.10a
• /
• pp.585-587
• /
• 2022

The visual motivation between AP devices is NTP-based visual motivation through the access of the Internet through the internal wired LAN, but this has several seconds of visual difference in hundreds of milliseconds (msec) depending on the network. The frame for the output of the video will vary depending on the application, but usually 24 (image) frames are output to the screen in one second. Therefore, the visual synchronization between peripheral devices can be performed through the adjacent moving camera device, not the wired method. The programming method of generating API for synchronization command when creating an application for visual synchronization and delivering it to AP through MAC may differ from the time in synchronization command according to the environment of the operating system at the transmission side and the situation of the buffer queue of the MAC. Therefore, as a method to solve this problem, the renewal of visual information in the device driver terminal controlling MAC can be much more effective.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.7
• /
• pp.589-596
• /
• 2014

Block Transporter should be optimized transportation path, otherwise it brings about lot of logistics costs and production delays. Block Transporter location must be checked in real time for optimization of transportation path. In this paper we implement real-time location determination using mobile RFID for location of Block Transporter. Mobile RFID reader mounted on a smartphone is recognize Mobile RFID Tag attached in the Transporter. Then, Smartphone is store information of every Transporter name and load and etc. Finally, Smartphone is transmit information(Mobile RFID Tag information, Transporter information, location determination information used AP and GPS) to the server. As a result, We can optimize or modify transportation path of Block Transporter in real-time using information transmitted to the server.