• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.8
• /
• pp.525-529
• /
• 2017

Molybdenum oxide ($MoO_3$) offers pivotal advantages for high optical transparency and low light reflection. Considering device fabrication, n-type $MoO_3$ semiconductor can spontaneously establish a junction with p-type Si. Since the energy bandgap of Si is 1.12 eV, a maximum photon wavelength of around 1,100 nm is required to initiate effective photoelectric reaction. However, the utilization of infrared photons is very limited for Si photonics. Hence, to enhance the Si photoelectric devices, we applied the wide energy bandgap $MoO_3$ (3.7 eV) top-layer onto Si. Using a large-scale production method, a wafer-scale $MoO_3$ device was fabricated with a highly crystalline structure. The $MoO_3/p-Si$ heterojunction device provides distinct photoresponses for long wavelength photons at 900 nm and 1,100 nm with extremely fast response times: rise time of 65.69 ms and fall time of 71.82 ms. We demonstrate the high-performing $MoO_3/p-Si$ infrared photodetector and provide a design scheme for the extension of Si for the utilization of long-wavelength light.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2000.05a
• /
• pp.15-16
• /
• 2000

• Journal of Powder Materials
• /
• v.24 no.5
• /
• pp.400-405
• /
• 2017

The addition of a large amount of alloying elements reduces the compactibility and increases the compacting pressure, thereby shortening the life of the compacting die and increasing the process cost of commercial PM steel. In this study, the characteristic changes of Fe-Mo-P, Fe-Mn-P, and Fe-Mo-Mn-P alloys are investigated according to the Si contents to replace the expensive elements, such as Ni. All compacts with different Si contents are fabricated with the same green densities of 7.0 and $7.2g/cm^3$. The transverse rupture strength (TRS) and sintered density are measured using the specimens obtained through the sintering process. The sintered density tends to decrease, whereas the TRS increases as the Si content increases. The TRS of the sintered specimen compacted with $7.2g/cm^3$ is twice as high as that compacted with $7.0g/cm^3$.

• Development and Reproduction
• /
• v.26 no.2
• /
• pp.79-90
• /
• 2022

Krüppel-like factor 10 (KLF10) regulates various cellular functions, such as proliferation, differentiation and apoptosis, as well as the homeostasis of several types of tissue. In the present study, we attempted a loss-of-function analysis of zebrafish Klf11a and Klf11b, which constitute human KLF10 homologs. Embryos injected with klf11b-morpholino (MO) showed developmental retardation and cell death, whereas klf11a-MO-injected embryos showed normal development. In klf11b-MO-injected embryos, a dramatic increase in the amount of zebrafish p53 mRNA might be the cause of the increase in that of bax. The degree of apoptosis decreased in the klf11b-MO and p53-MO co-injected embryos. These findings imply that KLF10 is a negative regulator of p53-dependent transcription, suggesting that the KLF10/p53 complex may play an important role in apoptosis for maintenance of tissue homeostasis during embryonic development.

• Biomedical Science Letters
• /
• v.1 no.1
• /
• pp.89-94
• /
• 1995

Considering the planar structure and nonpolar properity of benzo(a)pyrene(B(a)p) and the planar heme part of cytochrome P-450, stacking interaction is probable. MO calculation on B(a)P and heme part of cytochrome P-450 were carried out to dertermine probable stacking interaction models. In this case, orbital interaction is most important. Accordingly, the stacking positions have high eigen vector in frontier orbital and boning type between two molecules. In this way, five probate models were selected and examined by MN2 and MO method. The most probable .stacking interaction model which is the 4, 5, 6 positions of B(a)P overlap carbon atom and pyrrole ring of ring of heme group was determined.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.332.2-332.2
• /
• 2016

Two dimensional transition-metal dichalcogenides (TMDs) semiconductors are attractive materials for optoelectric devices because of their direct energy bandgap and transparency. To investigate the feasibility of transparent p-n junctions, we have fabricated a p-n heterojunction consisting of p-type WSe2 and n-type MoS2 flakes since WSe2 and MoS2 with proper electrode metals exhibit p-type and n-type behaviors, respectively. These heterojunctions exhibits gate-tunable rectifying behaviors and photovoltaic effects (ECE ~ 0.2%) indicating that p-n junctions were formed. In addition, photocurrent and photovoltaic effects were observed under light illumination, which were dependent on the gate voltage. In addition, the photocurrent mapping images indicate that the photovoltaic effects comes from the junction area. Possible origins of gate-tunability are discussed.

• Journal of Sensor Science and Technology
• /
• v.28 no.5
• /
• pp.271-276
• /
• 2019

Pure and 0.5, 1, 2, 5, and 10 at% of Mo-doped $Co_3O_4$ yolk-shell spheres were synthesized by ultrasonic spray pyrolysis of droplets containing Co nitrate, ammonium molybdate, and sucrose and their gas sensing characteristics to 5 ppm trimethylamine (TMA), ethanol, p-xylene, toluene, ammonia, carbon monoxide, and benzene were measured at $225-325^{\circ}C$. The sensor using pure $Co_3O_4$ yolk-shell spheres showed the highest response to p-xylene and very low response to TMA at $250^{\circ}C$, while the doping of Mo into $Co_3O_4$ tended to increase the overall responses of gas sensors. In particular, the sensor using 5 at% Mo-doped $Co_3O_4$ yolk-shell spheres exhibited the high response to TMA with low cross-responses to other interfering gases. The high response and selectivity of Mo-doped $Co_3O_4$ yolk-shell spheres to TMA are attributed to the electronic sensitization by higher valent Mo doping and acid-base interaction between TMA and Mo components.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.5
• /
• pp.379-386
• /
• 1994

Reactions of 1',2-bis(diphenylphosphino)-l-(N,N-dimethylaminomethyl)ferrocene (FcNPP) with $M(CO)_6$ (M=Cr, Mo, W) in the presence of TMNO (Trimethylamine oxide) in a stoichiometric ratio of 1 : 1.5 : 3.5 produced a series of Gp 6 metal carbonyl derivatives with a variety of coordination modes: M(CO)$_4({\eta}^2$-FcNPP-P,P) (M=Cr, Mo, W), $M(CO)_5({\eta}^1-FcNPP-P) (M=Mo, W)\;,\; M_2(CO)_9({\eta}^1\;,\;{\eta}^2-FcNPP-P,P,N) (M=Cr, Mo)\;,\;M_2(CO)_{10}({\eta}^1\;,\;{\eta}^1-FcNPP-P,P) (M=Cr, Mo, W)\;, and\;W(CO)_4({\eta}^2-FcNPP(O)-P,N)$. All these complexes were characterized by microanalytical and spectroscopic techniques. In one case, the structure of W(CO)$_4({\eta}^2$-FcNPP(O)-P,N) was determined by X-ray crystallography. Crystals are monocinic, space group P$2_{1/C}$, with a=10.147(2), b=19.902(3), c=19.821(4) ${\AA},\;{\beta}=96.88(2)^{\circ},\;V=3974(l){\AA}^3$, Z=4, and $D_{calc}=1.64 g cm^{-3}$. The geometry around the central tungsten metal is a distorted octahedron, with the nitrogen and phosphorus atoms being cis to each other. Some of these complexes exhibited catalytic activities in the allylic oxidation and epoxidation of cholesterly acetate. Other oxidation products were also formed with the different chemical yields and product distribution depending upon the ligand and the central metal.

• Journal of the Korean Chemical Society
• /
• v.38 no.2
• /
• pp.101-107
• /
• 1994

Some molybdenum(III) and (IV) complexes have been prepared from the reaction of $MoCl_4$·2MeCN with N, P, O-donating ligands and characterized by elemental analysis, infrared and UV-Visible spectroscopy. 3,5-Lutidine, 1,2-phenylenediamine, 8-hydroxyquinoline, 9,10-phenanthrenequinone, triphenylphosphine and 1,2-bis(diphenylphosphino)ethane were chosen as coordinating ligands. Stretching frequencies $\upsilon$ (Mo-Cl) of Mo(IV) appear at higher frequencies than those of Mo(III) complexes due to the increasing oxidation number of metal. $MoCl_4(L)_2$ exhibit one Mo-Cl stretching frequency, whereas Mo$Cl_4$(L^L) exhibit four Mo-Cl stretching frequencies. The number of Mo-Cl stretching frequency suggestes the former complexes have trans($D_{4h}$) and the latter complexes have cis($C_{2v}$) symmetry. Stretching frequency ${\nu}g(C{\equiv}N)$ of acetonitrile in Mo(III) complexes are shifted to about 30 $cm^{-1}$ higher frequency compared with that of a free ligand (2260 $cm^{-1}$). These spectral data indicates that Mo(III) complexes are in the octahedral geometries with the coordinated acetonitrile. Finally each molybdenum(III) and (IV) complexes showed the following formulation; $[MoCl_4(L)_2]$,[Mo$Cl_4$(L^L)], $[MoCl_3(L)_2MeCN]$ and [Mo$Cl_3$(L^L)MeCN].

• Analytical Science and Technology
• /
• v.6 no.3
• /
• pp.289-296
• /
• 1993

The formation of Mo(VI)-alizarin red S chelate ion and its extraction into an organic solvent by ion-pairing were studied for the separative determination of trace Mo(VI) in natural water samples. Natural water 100mL was sampled in 250mL separatory funnel. After Mo(VI)-ARS chelate ion was formed by adding 0.01M alizarin red S solution 0.5mL to the water sample of pH 4.0, 0.2% aliquat-336 chloroform solution 10mL was added and the solution was vigorously shaked for about 30 seconds to from the ion-pair between Mo(VI)-ARS and aliquat-336, completely. The solution was stood for about 90 minutes. And the organic phase was taken for the absorbance measurement of the ion-pair at 520 nm. The content of Mo(VI) in sample was obtained from the standard calibration curve. Several extraction conditions such as pH, adding amounts of alizarin red S and aliquat-336, and shaking and standing times were optimized. This procedure was applied to the analysis of river and tap waters. It could be confirmed from the recoveries of over 99% in samples spiked with a given amount of Mo(VI) that this method was quantitiative in the determination of trace Mo(VI) in a natural water.