• 제목/요약/키워드: MoM

검색결과 2,404건 처리시간 0.032초

전기 방사를 이용한 1D / 2D 하이브리드 구조 고활성 MoS2 / CNF 수소 발생 촉매의 합성 및 특성 분석 (MoS2/CNFs derived from Electrospinning and Heat treatment as the Efficient Electrocatalyst for Hydrogen Eovlution Reaction in Acidic Solution)

  • 이정훈;박유세;장명제;박성민;이규환;최우성;최승목;김양도
    • 대한금속재료학회지
    • /
    • 제56권12호
    • /
    • pp.885-892
    • /
    • 2018
  • Molybdenum disulfide ($MoS_2$) based electrocatalysts have been proposed as substitutes for platinum group metal (PGM) based electrocatalyst to hydrogen evolution reaction (HER) in water electrolysis. Here, we studied $MoS_2/CNFs$ hybrid catalyst prepared by electrospinning method with heat treatment for polymer electrolyte membrane(PEM) water electrolysis to improve the HER activity. The physicochemical and electrochemical properties such as average diameter, crystalline properties, electrocatalitic activity for HER of synthesized $MoS_2/CNFs$ were investigated by the Scanning Electron Microscope (SEM), X-ray Diffraction (XRD), X-ray Photoelectron Spectroscopy (XPS), Transmission Electron Microscopy (TEM), Raman Spectroscopy (Raman) and Linear Sweep Voltammetry (LSV). The as spun ATTM/PVP nanofibers were prepared by sol-gel and electrospinning method. Subsequently, the $MoS_2/CNFs$ was dereived from reduction heat treatment of ATTM at the ATTM/PVP nanofibers and carbonization heat treatment. Synthesized $MoS_2/CNFs$ electrocatalyst had an average diameter of $179{\pm}30nm$. We confirmed that the $MoS_2$ layers in $MoS_2/CNF$ electrocatalyst consist of 3~4 layers from the Raman results. In addition, We confirmed that the $MoS_2$ layers in $MoS_2/CNF$ catalyst consist of 7.47% octahedral 1T phase $MoS_2$, 63.77% trigonal prismatic 2H phase $MoS_2$ with 28.75% $MoO_3$ through the XRD, Raman and XPS results. It was shown that $MoS_2/CNFs$ had the overpotential of 0.278 V at $10mA/cm^2$ and tafel slope of 74.8 mV/dec in 0.5 M sulfuric acid ($H_2SO_4$) electrolyte.

Performance and Metabolism of Calves Fed Starter Feed Containing Sugarcane Molasses or Glucose Syrup as a Replacement for Corn

  • Oltramari, C.E.;Napoles, G.G.O.;De Paula, M.R.;Silva, J.T.;Gallo, M.P.C.;Pasetti, M.H.O.;Bittar, C.M.M.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제29권7호
    • /
    • pp.971-978
    • /
    • 2016
  • The aim of this study was to evaluate the effect of replacing corn grain for sugar cane molasses (MO) or glucose syrup (GS) in the starter concentrate on performance and metabolism of dairy calves. Thirty-six individually housed Holstein male calves were blocked according to weight and date of birth and assigned to one of the starter feed treatments, during an 8 week study: i) starter containing 65% corn with no MO or GS (0MO); ii) starter containing 60% corn and 5% MO (5MO); iii) starter containing 55% corn and 10% MO (10MO); and iv) starter containing 60% corn and 5% GS (5GS). Animals received 4 L of milk replacer daily (20 crude protein, 16 ether extract, 12.5% solids), divided in two meals (0700 and 1700 h). Starter and water were provided ad libitum. Starter intake and fecal score were monitored daily until animals were eight weeks old. Body weight and measurements (withers height, hip width and heart girth) were measured weekly before the morning feeding. From the second week of age, blood samples were collected weekly, 2 h after the morning feeding, for glucose, ${\beta}$-hydroxybutyrate and lactate determination. Ruminal fluid was collected at 4, 6, and 8 weeks of age using an oro-ruminal probe and a suction pump for determination of pH and short-chain fatty acids (SCFA). At the end of the eighth week, animals were harvested to evaluate development of the proximal digestive tract. The composition of the starter did not affect (p>0.05) concentrate intake, weight gain, fecal score, blood parameters, and rumen development. However, treatment 5MO showed higher (p<0.05) total concentration of SCFAs, acetate and propionate than 0MO, and these treatments did not differ from 10MO and 5GS (p>0.05). Thus, it can be concluded that the replacement of corn by 5% or 10% sugar cane molasses or 5% GS on starter concentrate did not impact performance, however it has some positive effects on rumen fermentation which may be beneficial for calves with a developing rumen.

A Combination Method of CO2-Narcosis and Cold Treatment for Breaking Diapause of Bombus ignitus and Bombus terrestris Bumblebee Queens

  • Yoon, Hyung Joo;Lee, Kyeong Yong
    • International Journal of Industrial Entomology and Biomaterials
    • /
    • 제28권2호
    • /
    • pp.58-65
    • /
    • 2014
  • Bumblebees are important pollinators of crops and wildflowers. Bumblebees generally produce one generation per year. One of the key stages for year-round rearing of bumblebees is breaking diapause. To evaluate the effects of a combination method of $CO_2$-narcosis and cold treatment to break the diapause of B. ignitus and B. terrestris queens, we determined whether this method affected their ability to establish a colony after the diapause break. The diapause treatment regimes that were utilized were $CO_2$ ($CO_2$-narcosis), CT-1M (cold treatment at $5^{\circ}C$ for 1 mo), CT-1M-$CO_2$ ($CO_2$-narcosis after cold treatment for 1 mo), CT-2M-$CO_2$ ($CO_2$-narcosis after cold treatment for 2 mo), CT-2M (cold treatment for 2 mo), CT-2.5M-$CO_2$ ($CO_2$-narcosis after cold treatment for 2.5 mo) and CT-2.5M (cold treatment at $5^{\circ}C$ for 2.5 mo). In view of the effects on the colony developmental characteristics of B. ignitus queens, the most favorable diapause treatment was CT-1M-$CO_2$. A combination method of $CO_2$-narcosis and cold temperature treatment yielded better results than that of single $CO_2$-narcosis or cold temperature treatment on the colony development of diapause-broken B. ignitus queens. In the case of B. terrestris queens, we concluded that a combination method of $CO_2$ and cold temperature treatment yielded better results than that of a single cold-temperature (up to 2 mo) treatment. In conclusion, the findings of the present study indicated that the combined application of $CO_2$ and cold temperature was a favorable method for the colony development of diapause-broken B. ignitus and B. terrestris queens compared with only $CO_2$-narcosis or cold temperature treatments. A combination method of $CO_2$ and cold treatment reduced the side effect of $CO_2$-narcosis and shortened the duration of cold treatment by at least 1 mo.

산소-니트로실 착물의 연구(제3보): 티오메틸아미드옥심의 몰리브덴과 텅스텐 산소-니트로실 착물의 합성과 특성 (Synthesis and Properties of Molybdenum and Tungsten Oxo-Nitrosyl Complexes of Methylthioamidoxime)

  • 노수균;오상오
    • 대한화학회지
    • /
    • 제40권1호
    • /
    • pp.28-36
    • /
    • 1996
  • 본 연구의 오핵 착물은 몰리브덴(VI)과 텅스텐(VI)의 다핵 착물, 몰리브덴(O)과 텅스텐(O)의 디니트로실 단핵 착물 및 티오메틸아미드옥심의 반응에서 얻었다. 합성한 착물$(n-Bu_4N)_2[Mo_4O_{12}Mo(NO)_{2}{CH_3SCH_2C(NH_2)NHO}_2{CH_3SCH_2C(NH)NO}_2]$ (1), $(n-Bu_4N)_2[W_4O_{12}Mo(NO)_2{CH_3SCH_2C(NH_2)NHO}_2{CH_3SCH_2C(NH)NO}_2]$ (2) $(n-Bu_4N)_2[Mo_4O_{12}Mo(NO)_2{CH_3SCH_2C(NH_2)NHO}_2{CH_3SCH_2C(NH)NO}_2]$ (3)은 원소 분석, 적외선, 전자 흡수 및 $^1/H\;NMR$ 스펙트라에 의해 특성을 조사하였다. 착물의 분광학적인 연구는 시스-${M(NO)_2}^{2+}$(M=Mo, W) 단위체 및 착물의 적은 비편재화 존재를 알 수 있다. 합성한 착물$(n-Bu_4N)_2\;[W_4O_{12}Mo(NO)_2{CH_3SCH_2C(NH_2)NHO}_2{CH_3SCH_2C(NH)NO}_2]$ (2)은 X-선 단결정 회절에서 결정구조를 밝혔고, 얻은 데이타는 Monoclinic, $P2_1/a,\;a\;=\;22.14(2){\angs},\;b\;=\;14093(1){\angs},\;{\beta}\;=\;111.08(6){\deg},\;V\;=\;7155(9){\angs}^3,$ Z = 4이었다. 구조 결정에 이용한 회절강도 6191개($I>3{\sigma}(I)$)에 대한 최종 신뢰도 인자는 0.072 이었다. 물질의 골격구조는 텅스텐의 산화상태 6가로 구성된 두 개의 이핵체 $[W_2O_5{CH_3SCH_2C(NH_2)NHO}\;{CH_3SCH_2C(NH)NO}]$와 몰리브덴의 산화상태 0가인 ${Mo(NO)_2}6{2+}$로 형성되어 있다. ${M(NO)_2}^{2+}$(M = Mo, W) 단위체는 형식상 시스 형태이며 기하학적으로 $C_{2v}$ 대칭을 가진다.

  • PDF

Mod. 9Cr-1Mo강에서의 $550^{\circ}C$ 부근에서 템퍼링시 발생하는 취성에 관한 연구 (Study on the Embrittlement of the Mod. 9Cr-1Mo Steel Tempered at $550^{\circ}C$)

  • 구지호;신종호;허성강
    • 열처리공학회지
    • /
    • 제23권3호
    • /
    • pp.156-162
    • /
    • 2010
  • The modified 9Cr-1Mo steel (P91 steel) is very popular as a boiler tube material of the USC (Ultra-Supercritical) power plants. The steels were tempered in the temperature range of 400 to $650^{\circ}C$ and the mechanical tests, such as impact and hardness tersts were performed at the room temperature for the tempered steels. A drop in the impact value (embrittlement) and the hardeness increase were simultanously observed in the range of temperature between $475^{\circ}C$ and $600^{\circ}C$, particularly at $550^{\circ}C$. TEM observation shows the hardening was caused by $M_2C$, resulting in the embrittlement. And the maximum volume fraction of $M_3C$ was also observed at $550^{\circ}C$, Therefore, the embrittlement seems to be caused by both the $M_2C$ and $M_3C$.

Novel Two-dimensional Network Based on Amino-acid-octamolybdate Bridged by Second Metals: {M(H2O)3(pro)Mo4O13}2·2H2O (pro = proline, M = Co, Ni, Cu, Zn)

  • Wu, Xiao-Yuan;Lu, Can-Zhong;Xia, Chang-Kun;Chen, Shu-Mei;Liu, Jiu-Hui;Chen, Li-Juan;Yang, Wen-Bin
    • Bulletin of the Korean Chemical Society
    • /
    • 제27권8호
    • /
    • pp.1206-1210
    • /
    • 2006
  • Four isostructural amino-acid-based polyoxomolybdates, {$M(H_2O)_3(pro)Mo_4O_{13}$}$_2{\cdot}2H_2O$ (pro = proline, M = Co (1), Ni (2), Cu (3), Zn (4)), have been synthesized and structurally characterized by single crystal X-ray diffraction, elemental analysis, IR spectrum, TG analysis. The structures of 1-4 are layered networks built up from {$Mo_8O_{26}(pro)_2$}$^{4-}$ units and {$M(H_2O)_3O_3$} octahedra, the uncoordinated water molecules occupying the interlayer regions.

Effects of Fattening Period on Growth Performance, Carcass Characteristics and Lipogenic Gene Expression in Hanwoo Steers

  • Kwon, Eung Gi;Park, Byung Ki;Kim, Hyeong Cheol;Cho, Young Moo;Kim, Tae Il;Chang, Sun Sik;Oh, Young Kyoon;Kim, Nam Kuk;Kim, Jun Ho;Kim, Young Jun;Kim, Eun-Jib;Im, Seok Ki;Choi, Nag-Jin
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제22권12호
    • /
    • pp.1654-1660
    • /
    • 2009
  • This study was conducted to investigate the effects of different fattening periods i.e. 25, 27 and 29 months of age (25 mo, 27 mo and 29 mo), on feed consumption, body weight gain, carcass parameters, and lipogenic gene expression in 45 Korean native steers (Hanwoo). Daily DM intake was higher in steers on 29 mo compared with those on 25 mo or 27 mo. Daily body weight gain was higher in steers on 25 mo compared with those on 27 mo or 29 mo during fattening and overall experimental periods. Therefore, feed conversion ratio was lower in 25 mo compared with 27 mo or 29 mo during the fattening and whole experimental periods. As expected, slaughter and carcass weights were higher in the order of 29 mo>27 mo>25 mo. Carcass yield grade was relatively lower in 29 mo reflecting higher back fat thickness compared with other treatments, while carcass quality grade was not largely influenced by the treatments. By investigation with an ultra-sound scanning technique, the marbling score was significantly and numerically higher in 25 mo compared with 27 mo or 29 mo. The mRNA levels of stearoyl-CoA desaturase (SCD) gene were gradually increased in the late fattening stages (p<0.01) and mRNA of acetyl-CoA carboxylase (ACC), ATP citrate lyase (ACL) and glucose transporter 4 (GLUT4) gene were highly expressed in 29 mo compared with 25 mo and 27 mo (p<0.05). However, gene expressions of adipocyte fatty acid binding protein 4 (FABP4) and lipoprotein lipase (LPL) were not significantly different among the treatments. Thus the present results indicated that different fattening period has no major effect on carcass characteristics, although 25 mo had a lower carcass weight compared with 27 mo or 29 mo.

X%C-5%Cr-5%V -5%Mo-5%W-5%Co 다합금계백주철의 응고조직에 관한 연구 (The Solidification Microstructure of X%C-5%Cr-5%V-5%Mo-5%W-5%Co Multi-Component White Cast Iron)

  • Yu, Sung-Kon;Yasuhiro Matsubara
    • 한국재료학회지
    • /
    • 제11권6호
    • /
    • pp.472-476
    • /
    • 2001
  • 광학 및 주사전자현미경을 사용하여 X%C-5%Cr-5%V-5%Mo-5%W-5%Co 조성을 가진 다합금계백주철에서 정출되는 탄화물의 종류 및 형태를 3차원적으로 관찰하였는 바 MC, M$_2$C 및 M$_{7}$C$_{3}$의 3종류의 탄화물이 정출되었다. MC탄화물은 꽃잎, 구상 그리고 산호초형태의 3종류, M$_2$C탄화물은 층상 및 판상의 2종류, M$_{7}$C$_{3}$7탄화물은 고크롬백주철에서 관찰되는 막대형태의 한 종류만 관찰되었다. 첨가한 합금원소중 Co는 기지조직에만 고용되었기 때문에 탄화물의 현상에는 영향을 미치지 않았다.않았다.

  • PDF

All Carrier Ohmic-Contacts을 이용한 유기 발광 다이오드의 성능 향상 연구

  • 박진우;임종태;염근영
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
    • /
    • pp.168-168
    • /
    • 2012
  • 본 연구에서는 Molybdenum oxide (MoOx)-doped 4,4',4"-tris[2-naphthyl(amino)] triphenylamine(2-TNATA)의 P-doping에 의한 hole ohmic contact과 fullerene (C60)/lithium (LiF)의 electron ohmic contact에 의한 All Ohmic contact를 이용한 유기 발광 다이오드 (OLEDs)의 광저항 특성의 향상을 설명한다. 이 소자의 성능은 MoOx-doped 2-TNATA의 두께와 도핑농도에 큰 영향을 받는다. glass/ITO/MoOx-doped 2-TNATA (100 nm)/Al 구조의 소자에서 MoOx-doped 2-TNATA 도핑 농도가 25%에서 75%로 증가할수록 hole only device의 hole ohmic 특성이 향상됐다. 그 이유는 p-type doping effect 때문이다. 또한 photoemission spectra 분석결과, p-type doping effect는 hole-injecting barrier 높이는 낮추고, hole conductivity는 향상되었다. 이것은 2-TNATA에 도핑된 MoOx의 전하전송 콤플렉스의 형성으로 hole carrier의 수가 증가하여 발생되었다. MoOx-doped 2-TNATA의 hole ohmic contact과 fullerene (C60)/lithium fluoride (LiF)의 electron ohmic contact 으로 구성된 glass/ITO/MoOx-doped 2-TNATA (75%, 60 nm)/NPB (10 nm)/Alq3 (35 nm)/C60 (5 nm)/LiF (1 nm)/Al (150 nm)의 소자구조는 6,4V에서 127,600 cd/m2 최대 휘도와 약 1,000 cd/m2에서 4.7 lm/W의 높은 전력 효율을 보여준다.

  • PDF

MoS2 Layers Decorated RGO Composite Prepared by a One-Step High-Temperature Solvothermal Method as Anode for Lithium-Ion Batteries

  • Liu, Xuehua;Wang, Bingning;Liu, Jine;Kong, Zhen;Xu, Binghui;Wang, Yiqian;Li, Hongliang
    • Nano
    • /
    • 제13권11호
    • /
    • pp.1850135.1-1850135.8
    • /
    • 2018
  • A one-step high-temperature solvothermal approach to the synthesis of monolayer or bilayer $MoS_2$ anchored onto reduced graphene oxide (RGO) sheet (denoted as $MoS_2/RGO$) is described. It was found that single-layered or double-layered $MoS_2$ were synthesized directly without an extra exfoliation step and well dispersed on the surface of crumpled RGO sheets with random orientation. The prepared $MoS_2/RGO$ composites delivered a high reversible capacity of $900mAhg^{-1}$ after 200 cycles at a current density of $200mAg^{-1}$ as well as good rate capability as anode active material for lithium ion batteries. This one-step high-temperature hydrothermal strategy provides a simple, cost-effective and eco-friendly way to the fabrication of exfoliated $MoS_2$ layers deposited onto RGO sheets.