• Journal of Magnetics
• /
• 제8권4호
• /
• pp.142-145
• /
• 2003

Valence states and electronic structures of Cr-doped $Nd_{1/2}A_{1/2}Mn_{1-y}Cr_{y}O_3$(NAMO; A=Ca, Sr) manganites have been investigated using x-ray absorption spectroscopy (XAS) and high-resolution photoemission spectroscopy (PES). All the Cr-doped NAMO systems exhibit the clear metallic Fermi edges in the Mn $e_{g}$ PES spectra near $E_{F}$. The spectral intensity at $E_{F}$ is higher for Cr-doped N $d_{l}$ 2/S $r_{l}$ 2/Mn $O_3$(NSMO) than for Cr-doped N $d_{l}$ 2/C $a_{l}$ 2/Mn $O_3$ (NCMO), reflecting the stronger metallic nature for NSMO than for NCMO. The measured Cr 2p XAS spectra are found to be very similar to that of C $r_2$ $O_3$, indicating that Cr ions in Cr-doped NAMO are in the trivalent C states ( $t^3$$_{2g}$). The Cr 2p XAS data are consistent with the Cr 3d PES spectra located at ∼1.3 eV below $E_{F}$ and having no emission near $E_{F}$.

• 공업화학
• /
• 제32권4호
• /
• pp.483-486
• /
• 2021

Catalytic ozonation of methyl ethyl ketone (MEK) has been examined over mesoporous MnO_x/Al₂O₃ (MA) catalysts developed by a solvent deficient method using two different manganese precursors including manganese chloride (C) and manganese sulfate (S) at room temperature. The maximum catalytic activities of MA with C (MEK removal efficiency and ozone decomposition of 98.4 and 93.7%, respectively) were higher than those of MA with S (MEK removal efficiency and ozone decomposition of 96 and 68%, respectively). Also the catalytic stability of MA with C was much higher than that of MA with S. The physico-chemical properties of catalysts are well correlated with the activity results, which confirmed that fine dispersion of MnO_x species with high ratios of Mn³⁺/Mn⁴⁺ and more acid sites are attributed to the higher catalyst stability for the MA-C catalyst.

• Corrosion Science and Technology
• /
• 제16권1호
• /
• pp.15-22
• /
• 2017

An oxidation-reduction scheme is an alternative approach for improving the galvanizability of advanced high-strength steel in the continuous hot-dip galvanizing process. Here, we investigated the effect of oxygen partial pressure ($P_{O_2}$) on the oxidation behavior of a transformation-induced plasticity steel containing 1.5 wt% Si and 1.6 wt% Mn during heating to and holding for 60 s at $700^{\circ}C$ under atmospheres with various $P_{O_2}$ values. Irrespective of $P_{O_2}$, a thin amorphous Si-rich layer of Si-Mn-O was formed underneath the Fe oxide scale (a $Fe_2O_3/Fe_3O_4$ bilayer) in the heating stage. In contrast to Si, Mn tended to segregate at the scale surface as $(Fe,Mn)_2O_3$. The multilayered structure of $(Fe,Mn)_2O_3/Fe_2O_3/Fe_3O_4$/amorphous Si-Mn-O remained even after extended oxidizing at $700^{\circ}C$ for 60 s. $Fe_2O_3$ was the dominantly growing oxide phase in the scale. The enhanced growth rate of $Fe_2O_3$ with increasing $P_{O_2}$ resulted in the formation of more Kirkendall voids in the amorphous Si-rich layer and a less Mn segregation at the scale surface. The mechanisms underlying the absence of FeO and the formation of Kirkendall voids are discussed.

• Journal of Magnetics
• /
• 제6권3호
• /
• pp.77-79
• /
• 2001

The semi-empirical superposition model has been applied to calculate the zero field splitting parameters of $Mn^{2+}$ion in $LiTaO_3$ single crystal, assuming that $Mn^{2+}$ion occupies one of two possible sites: $Li^{l+} \;or\; Ta^{5+}$ site, respectively. The 2nd-order axial zero field splitting parameters are $958\times10^{-4}cm^{-1}\; at\; Li^{1+}$ site and $193\times 10^{-4}cm^{-1} \;at\; Ta^{5+}$ site for $Mn^{2+}$ions. The 4th-order zero field splitting parameters at $Li^{l+} \;and\; Ta^{5+}$ sites are also determined. These calculated zero field splitting parameters are very important to determine the substitutional sites of doped impurity ions in $LiTaO_3$ crystal.

• 자원리싸이클링
• /
• 제11권5호
• /
• pp.34-38
• /
• 2002

최근 전자기기의 경박단소화로 페라이트 코아의 사용주파수가 고주파화 되고 있다. Mn-Zn ferrites에서 전력손실은 hysteresis loss, eddy current loss, residual loss로 구성되어 있으며, 500 KHz 이상의 주파수 영역에서는 residual loss가 주도적인 손실을 나타낸다. Induction level이 50 mT 이하인 경우 전력손실은 주파수의 3승 이상에 비례하여 증가한다. 작은 grain과 치밀한 미세구조는 고주파 대역에서 eddy current loss를 감소시킬 뿐만 아니라 자속밀도를 증가시켜 Residual loss역시 억제한다. Resonance frequency와 static permeability를 곱한 값이 큰 시편일수록 고주파 영역에서 낮은 전력손실을 보인다.

• Journal of Information Processing Systems
• /
• 제8권4호
• /
• pp.603-620
• /
• 2012

Proxy Mobile IPv6 (PMIPv6) is a network-based mobility support protocol and it does not require Mobile Nodes (MNs) to be involved in the mobility support signaling. In the case when multiple interfaces are active in an MN simultaneously, each data flow can be dynamically allocated to and redirected between different access networks to adapt to the dynamically changing network status and to balance the workload. Such a flow redistribution control is called "flow mobility". In the existing PMIPv6-based flow mobility support, although the MN's logical interface can solve the well-known problems of flow mobility in a heterogeneous network, some missing procedures, such as an MN-derived flow handover, make PMIPv6-based flow mobility incomplete. In this paper, an enhanced flow mobility support is proposed for actualizing the flow mobility support in PMIPv6. The proposed scheme is also based on the MN's logical interface, which hides the physical interfaces from the network layer and above. As new functional modules, the flow interface manager is placed at the MN's logical interface and the flow binding manager in the Local Mobility Anchor (LMA) is paired with the MN's flow interface manager. They manage the flow bindings, and select the proper access technology to send packets. In this paper, we provide the complete flow mobility procedures which begin with the following three different triggering cases: the MN's new connection/disconnection, the LMA's decision, and the MN's request. Simulation using the ns-3 network simulator is performed to verify the proposed procedures and we show the network throughput variation caused by the network offload using the proposed procedures.

• 반도체디스플레이기술학회지
• /
• 제19권3호
• /
• pp.49-54
• /
• 2020

We studied the electronic and magnetic properties for the Mn-doped chalcopyrite (CH) AlAs, GaAs, and AlGaAs₂ semiconductor by using the first-principles calculations. The chalcopyrite AlGaP₂, AlGaAsP, and AlGaAs₂ compounds have a semiconductor characters with a small band-gap. The interaction between Mn-3d and As-4p states at the Fermi level dominate rather than the other states. The ferromagnetic ordering of dopant Mn with high magnetic moment is induced due to the Mn(3d)-As(4p) strong coupling, which is attributed by the partially filled As-4p bands. The holes are mediated with keeping their 3d-electrons, therefore the ferromagnetic state is stabilized by this double-exchange mechanism. We noted that the ferromagnetic state with high magnetic moment is originated from the hybridized As(4p)-Mn(3d)-As(4p) interaction mediated by the holes-carrier.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.291-291
• /
• 2009

ZnS:Mn/Cu,Cl 계 나노 형광체의 특성을 살펴보았다. 실험에서는 ZnS:Mn 과 ZnS:Cu,Cl 형광체 파우더를 이용하여 밀링을 통하여 분쇄하여 EL 소자를 제작하였다. 형광체 파우더를 볼밀에 $\Phi5mm$의 지르코나이 볼과 에탄올과 함께 넣고 2, 4, 6, 8, 10일간 밀링을 하였다. 밀링한 형광체 파우더를 SEM을 통하여 파우더의 사이즈를 관찰하였다. 또 이 파우더를 이용하여 EL 소자를 제작하였다. 소자의 구조는 기판은 알루미나 기판을, 하부 전극은 Au, 유전체는 $BaTiO_3$ 유전체 페이스트를 사용하였으며, 형광체 적층 후 ITO 전극을 스퍼터를 이용하여 증착하여 제작하였다. 제작한 소자를 이용하여 소자의 휘도 등 발광 특성을 살펴보았다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제17권1호
• /
• pp.46-52
• /
• 2004

Hisardale male lambs (n=24, 4-5 month of age) were maintained on a conventional ration for a month, to equilibrate the body mineral status. Six lambs were sacrificed after one month of feeding; the samples of organs were analyzed to ascertain mineral status. The remaining 18 lambs were divided into 3 groups of 6 each on body weight basis. Three dietary treatments containing 100 ($T_1$), 110 ($T_2$) and 120% ($T_3$) of minerals (Ca, P, S, Zn and Mn) as specified by NRC (1985) were formulated and each treatment was alloted ad libitum to a group for 120 days. Blood and wool samples were collected at monthly intervals. At the end of the experiment a balance trial of 5 days duration was conducted to study the balance of mineral elements. The effective intake of minerals was Ca, 111 and 120, P, 110 and 122; S, 112 and 129; Zn, 112 and 126 and Mn, 109 and 123 percent in $T_2$ and $T_3$, respectively, in comparison to $T_1$ (100). The additional mineral supplementation had no significant effect on dry matter intake. The average daily weight gain was higher (p<0.01) in $T_2$ and $T_3$ than the control ($T_1$). The lambs under treatments $T_2$ (8.72) and $T_3$ (8.47 kg) consumed apparently lesser amount of dry matter per unit gain as compared to $T_1$ (10.81 kg). Significantly higher (p<0.05) dry matter and crude protein digestibility (%) were observed in $T_2$ and $T_3$ than in $T_1$. The mean balances for different elements were Ca, 1.14, 1.68 and 1.67 g; P, 1.70, 1.95 and 2.18 g; S, 0.54, 0.92 and 1.11 g; Zn, 22.56, 25.30 and 28.71 mg; Cu, 7.94, 5.71 and 5.53 mg; Fe, 33.19, 32.94 and 31.03 mg and Mn, 8.24, 14.40 and 16.07 mg/lamb/day. The retention of supplemental minerals increased (p<0.01) while that of Cu decreased (p<0.01) due to supplementation of minerals (Ca, P, S, Zn and Mn). Retention as per cent of intake increased statistically for S and Mn while that of Cu decreased. It can be concluded that supplementation of minerals (Ca, P, S, Zn and Mn) higher than the recommended level improved body weight gain and feed to gain ratio. The retention of minerals increased due to supplementation. Therefore, an additional supplementation of deficient minerals (Ca, P, S, Zn and Mn) by 10% was beneficial for Hisardale male lambs under tropical condition in India.

• Nano
• /
• 제13권10호
• /
• pp.1850121.1-1850121.11
• /
• 2018

In this study, a series of $LaMnO_3$-diamond composites with varied $LaMnO_3$ mass contents supported on micro-diamond have been synthesized using a sol-gel method. The as-prepared composites were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Raman spectroscopy and the Fourier transform infrared spectra (FTIR). Meanwhile, the photocatalytic performances were also tested by photoluminescence (PL) spectroscopy, ultraviolet-visible diffuse reflection spectra (UV-Vis DRS) and the degradation of weak acid red C-3GN (RC-3GN). Results show that the peak position of $LaMnO_3$ is shifted to low angle after the introduction of diamond, and perovskite particles uniformly distributed on the surface of diamond, forming a network structure, which can increase the active sites and the absorption of dye molecules. When the mass ratio of $LaMnO_3$ and diamond is 1:2 (LMO-Dia-2), the composite shows the most excellent photocatalytic activity. This result offers a sample route to enlarge the range of the application of micro-diamond and provide a new carrier for perovskite photocatalysts.