• 열처리공학회지
• /
• 제29권4호
• /
• pp.176-180
• /
• 2016

In this study, a microstructural investigation was conducted on the cracking phenonmenon occurring during hot rolling of Fe-23Mn high-manganese steels with different aluminium and carbon contents. Particular emphasis was placed on the phase stability of austenite and ferrite dependent on the chemical composition. An increase in the aluminum content promoted the formation of ferrite band structures which were easily deformed or cracked. In the steels containing high carbon contents of 0.4 wt.% or higher, on the other hand, the volume fraction and thickness of ferrite bands decreased and thus the cracking frequency was significantly reduced. Based on these findings, it is said that the microstructural evolution occurring during hot rolling of high-manganese steels with different aluminium and carbon contents plays an important role in the cracking phenomenon. To prevent the cracking, therefore, the formation of second phases such as ferrite should be minimized during the hot rolling by the appropriate control of the chemical composition and process parameters

• 한국세라믹학회지
• /
• 제29권7호
• /
• pp.539-543
• /
• 1992

The continuous growth method was developed for Mn-Zn Ferrite single crystals. It is a new process that the polycrystalline MnχZn1-χFe2O4 raw materials are supplied continuously from the powder feeding system to the crucible heated by R.F. induction and melted in the crucible, and after the single crystals seed is attached to crucible's hole, the crystals are pulled downward with rotation. Growing the crystals by using the growth method different from the conventional Bridgman or Floating Zone method, we defined the factors having effect on the crystal growing through the pre-experiments. They are temperature distribution in the crucible, melt velocity according to its height, wettability between the crucible's bottom and melt. Therefore, Mn-Zn Ferrite single crystals were to be grown by attaining the appropriate melt height in the crucible, powder feeding rate, temperature gradient between the crucible and interface, crystal growing speed, and this method was confirmed to have possibility for single crystal growing.

• 전자공학회논문지A
• /
• 제31A권6호
• /
• pp.143-148
• /
• 1994

In order to study the effect of D.C resistivity of sample on electromagnetic loss of ferrite at microwave frequency, samples were prepared for having differences in resistivity of an order of two. Microwave permeability($\mu$), permitivity($\varepsilon$) and effective linewidth(${\Delta}H_{eff}$), and ferromagnetic resonance linewidth(${\Delta}$H) were characterized. Tan${\delta}{\mu}$, tan${\delta}{\varepsilon}$ and ${\Delta}H_{eff}$ were decreased with increasing the resistivity and (${\Delta}$H) was increased with increasing Fe concentration, which was due to an increase of anisotropy magnetic field (=Ha).

• Applied Microscopy
• /
• 제48권4호
• /
• pp.117-121
• /
• 2018

The multiple length scale analysis of previously designed Fe-Mn-Al-C based low-density model alloys reveals the difference in ordered ${\kappa}-carbide$, $(Fe,Mn)_3AlC_x$, between Fe-25Mn-16Al-5.2C (at%) alloy and Fe-3Mn-10Al-1.2C (at%) alloy. For the former alloy composition consisting of fully austenite grains, ${\kappa}-carbide$ showed majorly cuboidal and minorly pancake morphology and its chemical composition was not changed through aging for 24 h and 168 h at $600^{\circ}C$. Meanwhile, for the isothermally annealed ferritic alloy system for 1 hr at 500 and $600^{\circ}C$, the dramatic change in the chemical composition of needle-shape ${\kappa}-carbide$, $(Fe,Mn)_3(Fe,Al)C_x$, was found. Here we address that the compositional fluctuations in the vicinity of the carbides are significantly controlled by abutting phase, either austenite or ferrite. Namely, the cooperative ordering of carbon and Al is an important factor contributing to carbide formation in the high-Mn and high-Al alloyed austenitic steel, while the carbon and Mn for the low-Mn and high Al alloyed ferritic steel.

• 한국결정성장학회지
• /
• 제1권2호
• /
• pp.23-33
• /
• 1991

Mn-Zn Ferrite는 단결정을 성장하기 위하여 용융하는 동안 불균질 용융과 ZnO휘발의 고유특성을 갖는 재료이다. 그 결과로, 결정성장축을 따라 양이온의 분포가 불균일 하게 된고 또한 기존의 Bridgman법에서는 도가니내에서 용융대가 장시간 유지됨으로써 백금입자가 결정안으로 침입하게된다. 이들은 훼라이트의 자기적 성질을 저하시키는 성질을 갖고 있다. 그러나 새로운 성장법에서는 이러한 단점들을 극복하고 양질의 단결정을 얻기 위하여 결정성장 인자들의 관계를 고찰하였으며 그 인자들은 다음과 같다 : 도가니내의 melt 높이, melt의 표면장력과 밀도, 계면에서의 melt거동, 도가니와 고액계면의 형상, 원료공급속도, 결정성장속도. 아울러, 성장된 결정의 조성을 분석하였을 때 초기조성과 비교하여 $\textrm{Fe}_2\textrm{O}_3$ 1.5 mol%, MnO, Zn 2.0 mol% 이내로 조성 변동은 각각 억제되었고 성장결정면 (110)에서 화확적인 etching 법을 이용하여 광학현미경을 통해 결정내부등을 관찰하였으며, 자기적 특성등을 측정하였다.

• 한국재료학회지
• /
• 제23권7호
• /
• pp.385-391
• /
• 2013

The influence of Cu and Ni on the ductile-brittle transition behavior of metastable austenitic Fe-18Cr-10Mn-N alloys with N contents below 0.5 wt.% was investigated in terms of austenite stability and microstructure. All the metastable austenitic Fe-18Cr-10Mn-N alloys exhibited a ductile-brittle transition behavior by unusual low-temperature brittle fracture, irrespective of Cu and/or Ni addition, and deformation-induced martensitic transformation occasionally occurred during Charpy impact testing at lower temperatures due to reduced austenite stability resulting from insufficient N content. The formation of deformation-induced martensite substantially increased the ductile-brittle transition temperature(DBTT) by deteriorating low-temperature toughness because the martensite was more brittle than the parent austenite phase beyond the energy absorbed during transformation, and its volume fraction was too small. On the other hand, the Cu addition to the metastable austenitic Fe-18Cr-10Mn-N alloy increased DBTT because the presence of ${\delta}$-ferrite had a negative effect on low-temperature toughness. However, the combined addition of Cu and Ni to the metastable austenitic Fe-18Cr-10Mn-N alloy decreased DBTT, compared to the sole addtion of Ni or Cu. This could be explained by the fact that the combined addition of Cu and Ni largely enhanced austenite stability, and suppressed the formation of deformation-induced martensite and ${\delta}$-ferrite in conjunction with the beneficial effect of Cu which may increase stacking fault energy, so that it allows cross-slip to occur and thus reduces the planarity of the deformation mechanism.

• 한국재료학회지
• /
• 제14권9호
• /
• pp.655-658
• /
• 2004

Lithium ferrites are a low-cost material which have been prominent in the high frequency core industry because of their excellent temperature performance and high squareness ratio. In order to develope the lithium ferrites with the high squareness and low coercive force, the ferrites of $Li_{0.48}Bi_{0.02}Ni_{0.04}Fe_{2.46-x}O_4$ were investigated the by varying composition, temperature and frequency. Electric loss of the Li-ferrite was lowered with the substitution of $Mn_{2}O_3$. The addition of $Mn_{2}O_3$ increased the magnetic induction (Bm&Br) but decreased the coercive force (Hc) and the squareness ratio (R=Br/Bm). Also, the Br value was stable at environmental temperature variation.

• Journal of Magnetics
• /
• 제14권2호
• /
• pp.93-96
• /
• 2009

The Mn-substituted M-type Ba-ferrite ($BaFe_{12-x}Mn_xO_{19}$; x = 0, 2, 4, 6) powders were prepared by the HTTD (High Temperature Thermal Decomposition) method. The effect of $Mn^{3+}$ Jahn-Teller ions on the magnetic properties has been studied by x-ray diffraction, vibrating sample magnetometry, and $M{\ddot{o}}ssbauer$ spectroscopy. With increasing Mn substitution, the lattice parameter $a_0$ increases while $c_0$ decreases. The magnetocrystalline anisotropy constants ($K_1$) were determined as 2.9, 2.2, 1.8, and, $1.3{\times}10^6\;erg/cm^3$ for x = 0, 2, 4, and 6, respectively, by the LAS method. We have studied the change of cation distribution by $M{\ddot{o}}ssbauer$ spectroscopy which is closely related to $K_1$.

• 한국자기학회지
• /
• 제24권2호
• /
• pp.46-50
• /
• 2014

Sol-gel법을 이용하여 $Fe_3O_4$과 $M_{0.2}Fe_{2.8}O_4$(M =Mn, Ni, Cu) 박막 시료을 만들어 M 치환에 따른 $Fe_3O_4$의 결정구조적 특성 및 양이온 분포를 X-ray diffraction(XRD)과 conversion electron M$\ddot{o}$ssbauer(CEMS) 분광법을 이용하여 조사하였다. CEMS 분광법을 이용하여 Fe 이온의 전하상태와 거동과 초미세 자기적 특성을 분석하였다. $M_{0.2}Fe_{2.8}O_4$(M =Mn, Ni, Cu) 시료들은 $Fe_3O_4$에서와 같이 입방정 스피넬 구조를 나타내었으며, Ni 이온 치환된 시료에서는 격자상수 값이 $Fe_3O_4$에서의 값과 비교하여 감소하였고, Mn 및 Cu 이온 치환된 시료에서는 증가하였다. CEMS 분석 결과 $Mn^{2+}$ 및 $Ni^{2+}$ 이온들은 주로 팔면체 자리를 치환하는 것으로 나타났으며, $Cu^{2+}$ 이온들은 팔면체, 사면체 자리를 모두 치환하는 것으로 나타났다. 부스펙트럼들의 세기비 $A_B/A_A$는 계산값과 측정값에 다소 차이가 있었으며, 이것은 M 치환이 A와 B자리의 Debye 온도에 영향을 주는 것으로 해석된다. B-자리 부스펙트럼의 비교적 큰 선폭값은 M 이온 치환에 기인한 B-자리의 M 이온분포가 초미세자기장에 미치는 분포효과로 나타났다.

• 분석과학
• /
• 제5권3호
• /
• pp.327-332
• /
• 1992

Mn-Zn 페라이트 단결정 성장시 일반적인 Bridgman법에서 조성변동 문제가 발생한다. 상평형도를 이용하여 원료 조성을 A, B로 분리하여 조성 B 원료를 단결정 성장 속도와 동일하게 투입함으로써 조성변동 문제를 해결하였다. 실험변수를 바탕으로 A조성을 52 mol% $Fe_2O_3$, 30 mol% MnO, 18 mol% ZnO로 선정하였고, 원하는 단결정 조성인 B 조성을 53 mol% $Fe_2O_3$, 28.5 mol% MnO, 18.5 mol% ZnO로 선정하여 직경 60mm, 길이 300mm 단결정을 성장시켰다. 성장된 단결정은 조성 B 원료 정제가 투입된 30~270mm 부위에서 조성 변도 없이 균일하게 B 조성과 비슷한 조성을 가졌으며, 이에 따라 주파수 5 MHz에서의 투자율값도 균일하게 600 근처로 높게 나타났다.