• 대한금속재료학회지
• /
• 제50권11호
• /
• pp.793-800
• /
• 2012

The effect of cold rolling on the microstructural evolution in 22Cr-0.2N micro-duplex stainless steel was investigated. The 22Cr-xNi-yMn-0.2N duplex stainless steel plates with various Ni and Mn contents were fabricated. The steels were vacuum induction melted and hot rolled, followed by annealing treatment at the temperature range of $1000-1100^{\circ}C$, in which both the austenite and ferrite phases were stable. The volume fraction of the ferrite phase depending on the alloy compositions of Ni and Mn increased with an increase in the annealing temperature. Grain growth in the ferrite phase occurred markedly after cold rolling followed by annealing, while fine recrystallised grains were still found in the austenite phase. A large number of martensite laths was found in the microstructure of cold rolled steels, which should be formed by strain-induced martensite from the austenite phase. The intersections of stacking faults were revealed by TEM observation. The volume fraction of the martensite phase increased with an increase of the reduction ratio by cold rolling.

• 한국재료학회지
• /
• 제31권12호
• /
• pp.677-681
• /
• 2021

The Mn-Zn ferrite powders were prepared by high energy ball milling, then compacted and sintered at various temperatures to assess their sintering behavior and magnetic properties. The initial ferrite powders were spherical in shape with the size of approximately 70 ㎛. After 3 h of ball milling at 300 rpm, aggregated powders ~230 nm in size and composed of ~15 nm nanoparticles were formed. The milled powders had a density of ~70 % when compacted at 490 MPa for 3 min. In the samples subsequently sintered at 1,273 K ~ 1,673 K for 3 h, the MnZnFe₂O₄ phase was detected. The density of the sintered samples had a tendency to increase with increasing sintering temperature up to 1,473 K, which produced the highest density of 98 %. On the other hand, the sample sintered at 1,373 K had the highest micro-hardness of approximately 610 Hv, which is due to much finer grains.

• 한국재료학회지
• /
• 제21권1호
• /
• pp.50-55
• /
• 2011

Energy resistance welding (ERW) is a pipe-producing process that has high productivity and low manufacturing cost. However, the high heat input of ERW degrades the mechanical property of the pipe. This study investigates the effect of heat input and alloying elements on microstructure and mechanical properties of ERW pipes. As the heat input increased, the ferrite amount increased. The ferrite amount in the weld centerline was larger than t at in the weld boundary. Medium carbon steels (S45C and K55) having 0.3~0.4wt.% carbon yielded a significant difference of ferrite amount in the weld centerline and weld boundary. High alloyed steels (DP780 and K55) having 1.5~1.6wt.% Mn showed a ferrite rich zone in the weld centerline. These phenomena are probably due to decarburization and demanganisation in the weld centerline. As the ferrite fraction increased, the hardness decreased a little for the S45C steels. In addition, DP780 steels and K55 steels showed that the hardness drops when those steels have a ferrite rich zone. But we demonstrated the good tensile property of the DP780 steels and K55 steels in which Mn is included.

• 한국세라믹학회지
• /
• 제32권9호
• /
• pp.1033-1039
• /
• 1995

The current experiment has quantitatively investigated the effect of the content of CaO and SiO2 on the microstructure, density, electrical resistivity, power loss and initial permeability of manganese zinc ferrites. The density increased initially with CaO and SiO2 content and the further addition showed an adverse effect. The excess addition of CaO and SiO2 developed a discontinuous grain growth with numerous pores inside grains and lowered the electrical resistivity. The initial permeability decreased with increasing the content of SiO2. The samples with relatively low power loss showed that half of the total loss at 10$0^{\circ}C$, 100 kHz and 2000 Gauss was due to the eddy current loss.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2004년도 춘계학술대회 논문집
• /
• pp.29-34
• /
• 2004

고성능 복합형 전자파 흡수체를 개발하기 위해 종래에는 지지재로서 주로 Silicone 고무나 CPE가 사용되어왔다. 본 연구에서는 전통 공예에서 사용되어 오던 옻에 대한 특징을 분석하고 옻의 전자파 흡수능을 조사하고 이를 지지재로 사용하여 MnZn 페라이트와 배합하여 전자파 흡수체를 제작한 경우의 전자파 흡수능을 조사하고, 흡수체의 두께에 따른 흡수능을 조사하였다. 옻을 지지재로 한 MnZn 페라이트 복합형 전자파 흡수체는 CPE나 Silicone 고무를 지지재로 한 전자파 흡수체에 비하여 우수한 전파흡수특성 나타내었으며, 옻을 지지재로 사용한 전파흡수체의 두께 변화에 따라 정합주파수와 전파흡수능이 변화함을 알았다.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2017년도 임시총회 및 하계학술연구발표회
• /
• pp.114-114
• /
• 2017

• 한국수소및신에너지학회논문집
• /
• 제15권1호
• /
• pp.32-38
• /
• 2004

Thermal behaviors of $(Cu_{0.5}Mn_{0.5})Fe_2O_4$, prepared by a solid method, were investigated for $H_2$ production by a thermochemical cycle. The thermal reduction of $(Cu_{0.5}Mn_{0.5})Fe_2O_4$ started from $300^\circ{C}$ and the weight loss was 1.3 wt% up to 1200. XRD shows the prepared ferrite has the spinel structure with a lattice constant of $8.414{\AA}$ and changed to the oxygen deficient structure by thermal reduction. Oxygen and hydrogen can be separately produced by the cycles of thermal reduction and water oxidation of the oxygen deficient ferrite.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.245-248
• /
• 2001

Nomura Kohsan Corp. is producing oxides, such as ZnMn$_2$O$_4$, ZnFe$_2$O$_4$, and ZnO, by burning the used dry manganese cells and by sorting out the remnant materials. It is possible to use the recycled materials of the spent dry batteries as the raw materials of deflection yoke cores. Making hish roasting temperature in the recycling system has an effect in reduction of the impurities. As a result, the loss of the cores using the recycled materials is lower. When using the recycled materials, it is required to add Mg (OH)$_2$. ZnO, and Fe$_2$O$_3$in order to rectify the composition of the MnMgZn ferrite for deflection yoke core applications. Furthermore, in order to disappear ZnMn$_2$O$_4$in the formation, it is necessary to control at higher calcining temperatures. The MnMgZn ferrite of using the recycled materials becomes Toss equivalent to the conventional material. TDK Corp. is manufacturing the deflection yoke cores from 1996 using the material recycled from the spent dry batteries.

• Journal of Welding and Joining
• /
• 제28권1호
• /
• pp.60-65
• /
• 2010

This paper is concerned with effects of Al, Mn and Si contents on spatter, fume, microstructure and mechanical property with 490MPa Grade Flux Core Wire(FCW). Ten kinds of FCW were fabricated by varying Mn, Si and Al contents and each FCW was weld for check the amount of spatter and fume generations, microstructures and mechanical property. Amount of spatter and fume generations was decreased with the increasing Si contents and decreasing by Al contents in FCW. And, their microstructure of weld metal were changed by Mn, Al and Si contents in FCW. With increasing of Al and Si, acicular ferrite was fine and volume fraction of acicula ferrite was increased. Thereby leading to improvement of Charpy impact property and strength.

• 한국세라믹학회지
• /
• 제35권10호
• /
• pp.1055-1060
• /
• 1998

고주파 저손실 재질로 사용되는 Mn-Zn ferrites의 제조공정 중 입도분포제어가 전자기적 물성에 미치는 효과에 관하여 연구하였다. 입도분포는 분쇄시간을 변화시켜 제어하였으며 철의 유입을 막기위하여 지르코니아볼을 사용하였다. 분쇄시간이 증가함에 따라 입자크기는 2.1 $\mu\textrm{m}$에서 1.0$\mu\textrm{m}$로 감소하였으며, 비표면적은 0.55에서 3.21m2/g으로 증가하였다. 비표면적 값이 증가할수록 소결체의 밀도는 증가하였으며, 높은 비표면적을 가진 분말의 경우 1300$^{\circ}C$ 이 상의 고온에서 소결할 때 불균일한 미세구조와 과대입성장이 발생하였으며, 전자기적 물성감소가 나타났다.