• Journal of Aquaculture
• /
• v.18 no.3
• /
• pp.142-146
• /
• 2005

In this study, the reattachment processes of small and medium size of spot of Mytilus coruscus and M. edulis were observed. The small spats (Shell length, SH, $3{\sim}7mm$) of hard shelled mussel, M. coruscus showed 100% reattachment rate within 7 minutes after the detachment of byssus thread and 100% survival rate. While large spats (SH 25 mm) showed 85% reattachment rate within 5 hours and 100% survival rate for 24 hours. The reattachment rate of M. edulis (SH 30 mm) was higher than that of M. coruscus (SH, 28 mm). The thread consisted of three identifiable structures; adhesive disc, adhesive thread and adhesive root. The adhesive disk and adhesive thread of M. coruscus were larger and thicker than those of M. edulis, whereas the thickness of adhesive root was the other way round. Further studies are required to identify the relationship between the structure of byssus thread and attachment ability. This study suggests that the sizes of spats could be an important factor in determining the timing of removing and reattaching mussel seedling for aquaculture or releasing to the sea.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.2
• /
• pp.131-136
• /
• 2001

Relative growth and composition of larval development stages in brood pouch of the melania snail, Semisulcospira libertina libertina were investigated based on monthly field samples for a year. Total number of specimens examined was 1,200. Size values (mean$\pm$S. D.) of shell height (SH), shell diameter (SD), total weight (TW), meat weight (MW) and shell weight (SW) were $15.96\pm3.41\;mm$, $7.82\pm1.38\;mm$, $0.55\pm0.31\;g$, $0.24\pm0.15\;g$ and $0.39\pm0.23\;g$, respectively, Water temperature (WT) of the sampling site varied from $1.3^{\circ}C\;to\;22.5^{\circ}C$. Relative growth equations among SH, SD, TW, MW and SW of S. libertina libertina specimens pooled were as follows: SD=0,3583SH+2.1648 $(R^2=0.8391)$, $TW=0.0005SH^{2.4853}\;(R^2=0.8391)$,$MW:\;0.0005SH^{2.849}\;(R^2= 0.8391)$ and $SW=0.0004SH^{2.3798}\;(R^2=0.7057)$. Female S. libertina libertina had larvae in its brood pouch throughout the year, Average number of larvae in the brood pouch varied from $91\pm33(July)$ to $396\pm174\;(November)$, decreasing in spring and increasing in autumn. In the monthly composition of larval stage in the brood pouch, trochophore, pre-veliger, veliger and juvenile showed maximum as $66.7\%$ in May, $70.7\%$ in November, $60.9\%$ in February and $13.9\%$ in January, respectively. Percent composition of the juveniles decreased in spring and autumn. In conclusion, S. libertina libertina is likely to have two main parturition periods, March to May and September and October.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.153-158
• /
• 2000

Atomic Force Microscope (AFM) was used to study cross sectional profiles and dimensions of fatigue striations in 2017-T351 aluminum alloy. Their widths (SW) and heights $(SH,\;SH_h)$ were measured from the cross sectional Profiles of three-dimension AFM images. The following results that will be helpful to understand the fatigue crack growth mechanism were obtained. (1) Coincidence of the crack growth rate with the striation width was found down to the growth rate of $10^{-5}$ mm/cycle. (2) The relation of $SH={\alpha}(SW)^{1.2}$ was obtained. (3) The ratio of the striation height to its width SH/SW and did not depend on the stress intensity factor range ${\Delta}K$ and the stress ratio R. From these results, the applicability of the AFM to nano-fractography is discussed.

• The Korean Journal of Malacology
• /
• v.13 no.2
• /
• pp.185-192
• /
• 1997

1990젼 3월부터 1991년 2월까지 전라북도 군산시 내초도 연안에 서식하는 동죽의 성장을 조사하였다. 1.조사해역의 연간 수온분포는 2.0-26.3$^{\circ}C$이고, 간석지 온도는 0.7-36.2$^{\circ}C$이었다. 2. 동죽의 패각에 나타나는 윤문은 연 1회 형성되며 윤문 형성시기는 3-4월로 조사되었다. 3. 초륜 형성기간은 9개월(0.75년)로 나타났다. 4. 각장(SL: mm)과 체중(TW: G)간의 관계는 TW=1.090 x $10^{-4}$ S $L^{3.2798}$( $r^{2}$=0.99)이었으며, 각장과 각고(SH:mm)간의 관계는 SH=0.865 SL + 0.250( $r^{2}$=0.99)이고, 각장과 각폭(SW: mm) 간의 관계는 SW=0.599 SL - 0.203 ( $r^{2}$=0.98; 각장 22 mm미만), SW=0.724 SL - 2.796( $r^{2}$=0.91; 각장 22 mm이상)이었다.5. 연령(t)에 대한 각장(S $L_{t}$ )의 Bertalanffy성장식은 $L_{t}$ =51.399(1- $e^{0.585}$8(t+0.064)이고, 연령(t)에 대한 체중 (T $W_{t}$ )의 Bertalanffy성장식은 $W_{t}$ =44.467(1- $e^{0.585}$8(t+0.064)$^{3}$로 나타났다.타났다.

• Journal of Aquaculture
• /
• v.15 no.2
• /
• pp.111-117
• /
• 2002

Effect of substrate composition, stocking density and food organisms on survival and growth of the surf clam, Spisula sachalinensis was studied. Spat collection from the substratum was the highest, when its sand size was less than 250 $\mu m4; at such substratum, survival and growth of the surf clam were also the highest. The spat (1.4 mm) grew to 4.6 mm and 8.2 mm in shell length on day 30 and 50, respectively. The relationship between shell length (SL) and shell height (SH), shell breadth (SB), total weight (TW) and shell weight (SW) of the spat are formulated by the following equations; SH : 0.7351SL+0.2272 ( $r^2$ =0.9600)i SB = 0.4037SL+0.2112 ($r^2$ = 0.9452); TW : 0.2824SL^{2.7020} ($r^2$ = 0.9820)i SW = $0.4021SL^{2.0217} ($r^2$ : 0.6169). In the substratum containing fine sand, growth and survival of the clam roared at the density of 1~2 ind./$cm^2$ were optimal. The quality of feed decreases in the following order; C. calcitrans, mixture group, I. galbana, P. lutheri, T. suecica.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.11 no.4
• /
• pp.116-121
• /
• 2006

Samples of Meretrix lusoria were collected monthly from the tidal flat of Simpo, Puan-gun, Chollabuk-do, west coast of Korea from April 2004 to March 2005. Age of M. lusoria was determined from the rings on the shell. The relationship between shell length and ring radius in each ring group was expressed as a regression line. Therefore, there is a correspondence in each ring formation. Based on the monthly variations in the marginal index (MI') of the shell, it is assumed that the ring of this species was formed once a year during the period of February to April. The relationship between shell length (SL) and shell height (SH; mm) was highly correlated with shell height as the following equation: SH = 0.8103 SL + 0.5145 $(r^2=0.991)$. The shell length (SL) - shell width (SW) relation was also expressed by the following equation: SW = 0.4897 SL + 0.0315 $(r^2=0.976)$. Shell length (SL; mm) and total weight (TW; g) was expressed by the following equation: $TW=2.9195\times10^{-4}\;SL^{2.9547}\;(R^2=0.991)$. Shell length (SL) and shell height (SH; mm) was highly correlated with shell height as the following equation: $SH=0.8103\;SL+0.5145\;(R^2=0.991)$ The shell length (SL) - shell width (SW) relation was also expressed by the following equation: $SW=0.4897\;SL+0.0315\;(R^2=0.976)$. Growth curves for shell length and total weight fitted to the von Bertalanffy's growth curve were expressed respectively as: $SL_t=104.9[l-e^{-0.2235(t+0.7677)}],\;TW_t=280.8[l-e^{-0.2235(t+0.7677)}]^{2.9547}$.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.11 no.4
• /
• pp.152-157
• /
• 2006

Samples of Meretrix lusoria were collected monthly from the tidal flat of Simpo, Puan-gun, Chollabuk-do, west coast of Korea from April 2004 to March 2005. Age of M. lusoria was determined from the rings on the shell. The relationship between shell length and ring radius in each ring group was expressed as a regression line. Therefore, there is a correspondence in each ring formation. Based on the monthly variations in the marginal index (MI') of the shell, it is assumed that the ring of this species was formed once a year during the period of February to April. The relationship between shell length (SL) and shell height (SH; mm) was highly correlated with shell height as the following equation: SH = 0.8103 SL + 0.5145 $(r^2=0.991)$. The shell length (SL) - shell width (SW) relation was also expressed by the following equation: SW = 0.4897 SL + 0.0315 $(r^2=0.976)$. Shell length (SL; mm) and total weight (TW; g) was expressed by the following equation: $TW=2.9195\times10^{-4}\;SL^{2.9547}\;(R^2=0.991)$. Shell length (SL) and shell height (SH; mm) was highly correlated with shell height as the following equation: $SH=0.8103\;SL+0.5145\;(R^2=0.991)$ The shell length (SL) - shell width (SW) relation was also expressed by the following equation: $SW=0.4897\;SL+0.0315\;(R^2=0.976)$. Growth curves for shell length and total weight fitted to the von Bertalanffy's growth curve were expressed respectively as: $SL_t=104.9[l-e^{-0.2235(t+0.7677)}],\;TW_t=280.8[l-e^{-0.2235(t+0.7677)}]^{2.9547}$.

• Korean Journal of Food Science and Technology
• /
• v.37 no.5
• /
• pp.695-701
• /
• 2005

Efficient method was established for analysis of sulfur-containing compounds, including dimethyl disulfide, dimethyl trisulfide, 3-methyl thiophene, allyl mercaptan, 2-methyl-3-furanthiol, and methional. Sulfur-containing compounds were extracted through solid phase microextraction (SPME) or static headspace extraction (SH), and quantified using gas chromatograph equipped with pulsed flame photometric detector. All sulfur compounds, except ally mercaptan, showed higher detection response when dissolved in hexane than in dichloromethane. Linear range was $10^2-10^4$. Dimethyl trisulfide showed lowest limit of detection (LOD) value of 15.2 ppt, and methional highest of 70.5 ppb. Highest extraction efficiency for sulfur-containing compounds, particularly polar and small molecular weight compounds, was observed in 75mm carboxen/polydimethylsiloxane fiber, followed by 65mm polydimethylsiloxane/divinylbenzene and 100mm polydimethylsiloxane. Compared to SPME, less sulfur-containing compounds could be analyzed by SH, mainly due to its low extraction efficiency, although lower amount of artifacts were formed during sample preparation.

• Proceedings of the KAIS Fall Conference
• /
• 2002.11a
• /
• pp.266-268
• /
• 2002

본 연구에서는 사출 성형품의 품질에 영향을 주는 인자중 금형의 온도에 따라 성형품의 웰드라인의 표면 및 단면의 미시구조에 미치는 영향에 대해 알아보았다. 또한, MmSH process 가 사출성형품에 미치는 영향 또한 알아보았다. 금형온도가 증가함에 따라 유동수지 선단간의 결합이 원활해져 웰드라인의 폭과 길이 모두 저하되는 것을 볼 수 있었으며, MnSH Process는 외관상 일반적인 사출조건에 비해 웰드라인, V-notch가 나타나지 않음을 알 수 있었다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.533-533
• /
• 2013

본 연구에서는 선형 대향 타겟 스퍼터 시스템을 이용하여 hetero sputtering방법으로 증착한Al-Ga-Zn-O (AGZO) 박막의 기판-타겟간 거리(Target-to-Substrate distance)에 따른 전기적, 광학적, 구조적 특성을 분석하였다. 타겟과 기판 사이의 거리 변화(30~120 mm)에 따른 AGZO 박막의 특성 변화를 관찰하기 위하여 일정한 DC 파워 250 W, 공정압력 0.3 mTorr, Ar 20 sccm에서 서로 다른 AZO 타겟과 GZO 타겟을 이용하여 hetero-sputtering 공정을 진행하였다. 최적의 타겟과 기판 사이의 거리를 결정하기 위해 AGZO 박막의 투과도(T)와 면저항($R_{sh}$)을 기반으로 figure of merit ($T^{10}/R_{sh}$)값을 계산하였다. 기판-타겟간 거리는 AGZO 박막의 밀도에 영향을 주는 핵심 인자로 30 mm에서 120 mm로 증가수록 밀도가 낮은 AGZO 박막이 형성되었다. 최적의 타겟과 기판 사이의 거리(30 mm)에서 AGZO 박막은 132 Ohm/sq의 낮은 면저항과 87.2%의 높은 투과도를 나타내었다. 그러나 기판-타겟간 거리가 증가할수록 같은 두께에서 면저항은 급격히 증가함을 발견할 수 있었으며 이러한 특성 변화는 스퍼터되어 기판에 도달하는 입자의 에너지 차이로 설명이 가능하다. 따라서 본 연구에서는 기판-타겟간 거리에 따른 AGZO 박막의 특성 변화를 설명할 수 있는 메커니즘을 다양한 분석을 통해 제시하였다. 또한 적화된 AGZO 투명 전극을 이용해 제작한 GaN-LED의 Damage free sputtering 기술에 대해서 소개한다.