• 한국유기농업학회지
• /
• 제7권2호
• /
• pp.179-188
• /
• 1999

분립과 상토재(vermiculite, perlite, peat moss)의 혼합비율이 Orchardgrass 유식물체의 생육에 미치는 영향을 조사하였다. 분립과의 혼합비율은 각각 100:0(control), 75:25, 50:50, 25:75, 0:100이였고 얻어진 결과는 다음과 같다. 1. 초장(PL)과 상토재와의 다른 혼합구에서 보다도 PM과의 혼합구에서 월등히 좋았다. 2. 경수(NT)는 다른 혼합구와 달리 분립 : PM(50:50)에서 유의하게 증가했다. 3. 근장(RL)은 다른 처리구와 유의하게 차이가 있었으며, PE와의 혼합비율에서 뿌리의 길이생장이 높았다. 4. 엽중(LW)은 50:50의 모든 혼합구에서 유의한 차이가 없었고, 특히 분리 : PM(75:25)와 분립 : PM(25:75)의 혼합구에서 유의한 차이가 인정되지 않았다. 5. 지상부 경중(SW)은 50:50의 모든 혼합구와 분립 : PM(75:25), 분립 : VL(75:25)에서 유의한 차이가 없었다. 6. Orchardgrass 유식물체의 지상부 경중과 지하부의 건물중이 생물학적 수량 증가 경향을 나타내었다. 7. 분립과 PM의 혼합비율이 50% 이상에서 orchardgrass 유식물체의 생물학적 수량을 증가시켰다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2013년도 제46회 KOSCO SYMPOSIUM 초록집
• /
• pp.9-10
• /
• 2013

This study reports the results of an experimental investigation of emission and temperatures from the syngas-air premixed flame with a various mixture composition in the region of large equivalence ratios. The effects of hydrogen contents and equivalence ratios on the flame velocity, which reported before, and emission of syngas fuel are examined. In this study, representative syngas mixture compositions ($H_2:CO$) such as $H_2:CO=10:90$, 25:75, 50:50 and 75:25 and equivalence ratios from 0.5 to 5.0 have been conducted. The emissions of syngas fuel were measured by the high precision analyzer with enclosure configuration and the adiabatic temperatures are calculated by used Chemkin basis. The NOx emission level is coincided relatively well with the adiabatic temperature distributions in lean mixture conditions, but for rich mixture conditions NOx level was also increased again even though the adiabatic temperature decreases. Such an increasing characteristics in rich mixture conditions is coincided well with the tendency that rather the flue gas temperature increases.

• 유기물자원화
• /
• 제1권2호
• /
• pp.267-274
• /
• 1993

본 연구에서는 지렁이의 분립과 토양의 혼합비율이 Orchardgrass 유식물체의 생육에 미치는 영향을 조사함으로서 생육에 적합한 혼합비율을 추정하였다. 지렁이의 분립과 토양의 혼합비율은 100:0, 80:20, 60:40, 40:60, 20:80, 0:100으로 하였다. 분립 60%의 혼합구에서 지상부와 뿌리의 건물중 및 생물학적 수량이 다른 혼합구보다 많아서 Orchardgrass 유식물체의 생육에 가장 적합한 혼합비율로 추정되었다. 이때 토양조건은 pH 6.16, 유기물함량 13.84%, 전질소량 0.84%, 유효인산함량 1413.9 ppm, 양분보전능 me/100g이였다. 생물학적 수량은 지상부와 뿌리의 건물중과 개체당 경수 및 1경중과 유의한 정상관이 존재하였다.

• 한국유기농업학회지
• /
• 제8권1호
• /
• pp.101-109
• /
• 1999

In order to investigate the possibility of treating the different mixture ratios of apple pomace and nightsoil sludge by vermicomposting was performed and the stability of worm casts, and availability of worm casts as plant growth media was evaluated by the analysis of chemical composition. The results were obtained as follows ; 1. The value of cast production at 100% apple pomace treatment was higher than those of other mixture ratios of apple pomace and nightsoil sludge. 2. The highest values of increasing rate and reproductive efficiency were obtained at mixture ratios of 60% apple pomace with 40% nightsoil sludge. 3. The value of increasing rate at 100% nightsoil sludge treatment was lower that those of other mixture ratios of apple pomace and nightsoil sludge. 4. Organic matter, available inorganic nutrients and stability of worm casts showed high values in all treatments. It means that worm casts are an excellent plant growth media source with a high chemical composition and their stability.

• 유기물자원화
• /
• 제2권2호
• /
• pp.77-88
• /
• 1994

하수오니를 첨기한 토양에서 Orchardgrass 유식물체의 생육과 토양의 이화학적 성질의 변화에 미치는 영향을 조사하였고, 식물체 부위에 집적된 중금속의 농도와 토양 잔류 중금속 농도를 분석하여 유기질 비료자원으로서 하수오니의 이용가능성을 검토하였다. Orchardgrass 유식물체의 생물학적 수량은 하수오니의 혼합비율이 높아짐에 따라서 증가되었고, 하수오니의 혼합비율이 높아짐에 따라서 토양의 이화학적 성질이 크게 개선되었다. Orchardgrass 유식물체는 개체당 경수와 1경중의 증가에 의하여 지상부 건물중이 증가되었고, 지상부 건물중의 증가에 의하여 생물학적 수량이 많아졌다. 식물체내의 전질소량과 생물학적 수량과는 2차곡선적인 증가경향을 나타내어, 하수오니중의 전질소량이 식물체의 생육에 미치는 영향이 컸다. 중금속의 종류에 따라서 식물체내에 집적되는 부위가 달라졌으며, 토양 잔류 중금속중에서 납(Pb)은 하수오니 60% 이상의 혼합비율에서 허용규제치(50ppm) 이상의 높은 농도를 나타내었다.

• 상하수도학회지
• /
• 제21권5호
• /
• pp.641-647
• /
• 2007

This study aims to find out optimum condition for hydrogen production and organic removal when treating food and swine wastewater together. For this purpose, various batch tests were conducted by changing mixture ratio from 6:4 (food wastewater:swine wastewater) to 1:9 without pretreatment process. For hydrogen production through anaerobic fermentation, the mixture ratios of R-1 (6:4), R-2 (5:5) and R-6 (1:9) were out of pH range appropriate for hydrogen production and mixture ratios of R-3 (4:6), R-4 (3:7), and R-5(2:8) showed appropriate hydrogen production where their pH ranges were 5.1~5.5. Especially in case of R-3, it consistently maintained appropriate pH range for hydrogen production for 72hr and produced maximum hydrogen. The characteristics of hydrogen production and cumulative hydrogen production according to each mixture ratio showed that R-1, R-2 and R-6 did not produce any hydrogen, and maximum hydrogen productions of R-3, R-4 and R-5 were 593ml, 419ml and 90ml, respectively. Total cumulative hydrogen productions of R-3, R-4 and R-5 were 1690ml, 425ml and 96ml, respectively. Based on previous results, it was concluded that, the most appropriate mixture ratio of food wastewater and swine wastewate rwas 4:6 (R-3). The experiment for COD removal rate to evaluate organic removal efficiency revealed that R-3, R-4 and R-5 showed high removal efficiencies during the highest hydrogen production amount and the highest efficiency was 41% with R-3.

• 한국연소학회지
• /
• 제16권1호
• /
• pp.15-21
• /
• 2011

An experimental study was conducted to investigate the flame stability of the synthetic gas (syngas) using an impinging premixed jet burner. Since the syngas mainly consisted of $H_2$ and CO, the $H_2$/CO mixture was simulated as the syngas. $H_2$/CO mixture ratios, fuel/air mixture velocities and equivalence ratios were used as major parameters on the flame stabilitym The role of the impinging plate on the flame stability was also examined. In addition, laminar burning velocities of the $H_2$/CO mixture were predicted numerically to understand the characteristics of the flame stability for the syngas. The increase in the H2 concentration into the syngas brings about the extension of the blowout limit and the reduction in the flashback limit in terms of the stable flame region. The impinging jet plate broadened the blowout limit but does not play important role in changing of the flashback limit. Finally, it was found that the stability region of the flame using the syngas, which is expressed in terms of the mixture velocity and the equivalence ratio in this study, significantly differed from that of $CH_4$.

• 한국대기환경학회지
• /
• 제22권6호
• /
• pp.758-766
• /
• 2006

A two-stage bioreactor, which consists of a biotrickling filter module and a biofilter module in series, was investigated for the enhanced treatment of a VOC mixture, toluene and methyl ethyl ketone (MEK). Throughout the experiments, the overall inlet loading rate was maintained at approximately $43g/m^3/hr$, but the inlet ratios of the VOCs were modified. The experimental results showed that the different ratios of the VOC mixture resulted in changes of overall removal efficiencies, elimination capacities (ECs) and microbial accumulation on the surface of each packing material. The ratio of inlet toluene to MEK at 50 : 150 was found to be most effective in terms of the overall removal efficiency, because, at this condition, MEK (i.e., the hydrophilic compound) was mostly removed in the biotrickling filter module and the following biofilter module was used to remove toluene. It was also found that when the inlet loading rate of the VOC mixture was serially increased stepwise within short-term periods, the ECs for toluene dropped significantly but the ECs for MEK increased at the ratio of the VOC mixture. These results implied that substrate interaction and/or substrate preferable utilization might have an effect on the biological removal of each compound in the two-stage bioreactor; therefore, the bioreactor should be operated in the condition where the substrate interaction could be minimized in order to maximize overall performance of the two-stage bioreactor.

• 한국자동차공학회논문집
• /
• 제10권2호
• /
• pp.73-79
• /
• 2002

The NO emissions at the exhaust manifo1d were investigated with a fast NO analyzer to investigate the cycle-by-cycle variations on NO emissions level and the dependence of NO emissions on combustion. The measurement was performed with a part load condition with respect to the mixture ratios and the changes in loads at 1800rpm. The averaged values were obtained during 200 cycles. We found that there is characteristic pattern in 70 emissions from exhaust port and it was possible to set a representative value with the data sampled during specific period. As the load increased, the characteristics of NO emissions were more dependent on combustion pressures. It was also analyzed that the correlation between combustion pressures and NO emissions for different equivalence ratios tends to increase as the mixture goes leaner, Furthermore, this correlation for the lean mixture near the lean limit seemed to be kept.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 추계학술발표대회 논문집
• /
• pp.71-74
• /
• 2000

In this study, the optimal condition of surface treatment for aluminum panel was determined by measuring the contact angle and T-peel strength. The contact angle was measured for various mixture ratios of acetylene gas and nitrogen gas. The mixture (acetylene gas to nitrogen gas) ratios used were 1:9, 3:7, 5:5, 7:3, and 9:1. The contact angle was also measured as a function of time of surface treatment. The results showed that the contact angle was a minimum for mixture ratio of 5:5. T-peel strength was a maximum for the treatment time of 30 second.