• 한국분무공학회지
• /
• 제22권4호
• /
• pp.175-184
• /
• 2017

The numerical investigation on the effects of water-mist characteristics has been carried out for the fire suppression mechanism. The FDS are used to simulate the interaction of fire plume and water mists, and program describes the fire-driven flows using LES turbulence model, the mixture fraction combustion model, the finite volume method of radiation transport for a non-scattering gray gas, and conjugate heat transfer between wall and gas flow. The numerical model is consisted of a rectangular enclosure of $L{\times}W{\times}H=1.5{\times}1.5{\times}2.0m^3$ and a water mist nozzle that be installed 1.8 m from fire pool. In the present study, the parameters of nozzle for simulation are the droplet size and the spray velocity. The droplet size influences to fire flume on fire suppression more than the spray velocity because of the effect of the terminal velocity. The optimal condition for fire suppression is that the droplet size and the spray velocity are $100{\mu}m$ and 20 m/s respectively.

• 한국결정학회지
• /
• 제8권2호
• /
• pp.111-118
• /
• 1997

Hydroxy-bisbenzoyloxy-allyloxycalix[4]arene의 분자 및 결정구조를 X-선 회절법으로 연구하였다. 결정의 공간군은 P21이고, 단위세포 상수는 a=11.045(3), b=33.545(2), c=10.319(4) Å, β=113.86(2)˚, Z=4, V=3496.0(1.8) Å3, DC=1.28 gcm-3이다. 회절 반점들의 세기는 Enraf-Noninus CAD-4 Diffractometer로 얻었으며, Mo-Kαradiation X-선을 사용하였다. 분자구조는 직접법으로 풀었으며 최소자승법으로 정밀화하였다. 최종 신뢰도 R값은 2945개의 회절반점에 대하여 0.076이었다. 결정학적으로 서로 다른 두개의 거울상체 분자들이 라세미 혼합물 형태로 결정화되어 있다. 분자내 수소결합이 있으며 hydroxy1 pheny1고리가 크게 벗어난 flattend cone conformation을 보여주는 분자구조이다.

• KEPCO Journal on Electric Power and Energy
• /
• 제2권1호
• /
• pp.89-96
• /
• 2016

The mechanism for laminar dust flame propagation can only be elucidated from a comprehensive mathematical model which incorporates conduction and radiation, as well as the chemical kinetics of particle devolatilization and gas phase and char reaction. The mathematical model for a flat, laminar, premixed coal-air flame is applied to the atmospheric coal-air mixtures studied by Smoot and co-workers, and comparisons are made with their measurements and predictions. Here the principal parameter for comparison is the laminar burning velocity. The studies of Smoot and co-workers are first reviewed and compared with those predicted by the present model. The effects of inlet temperature and devolatilization rate constants on the burning velocities are studied with the present model, and compared with their measurements and predictions. Their measured burning velocities are approximately predicted with the present model at relatively high coal concentrations, with a somewhat increased inlet temperature. From the comparisons, their model might over-estimate particle temperature and rates of devolatilization. This would enable coal-air mixtures to be burned without any form of preheat and would tend to increase their computed values of burning velocity.

• 한국분말재료학회지
• /
• 제8권4호
• /
• pp.245-252
• /
• 2001

Recent remarkable progress in the semiconductor industry has promoted smaller size of semiconductor chips and increased amounts of heat generation. So, the demand for a substrate material to meet both the characteristics of thermal expansion coefficient and heat radiation has been on the increase. Under such conditions, tungsten(W)-copper(Cu) has been proposed as materials to meet both of the above characteristics. In the present study, the W-10wt.%Cu powders were synthesised by the mixing and hydrogen reduction of the starting mixture materials such as W-Cu, $W-CuCl_2$and $WO_3-CuCl_2$ in order to obtain the full densification. The W-10wt.%Cu produced by hydrogen reduction showed the higher interparticle friction than the simple mixed W-10wt%Cu because of the W agglomerates. In the dilatometric analysis the W-10wt.%Cu prepared from the $W-CuCl_2$was largely shrank by heating up $1400^{\circ}C$ at the constant heating rate of $5^{\circ}C$/min. The possibility of application of metal injection molding (MIM) was also investigated for mass production of the complex shaped W-Cu parts in semiconductor devices. The relationship between the temperature of molding die and the pressure of injection molding was analyzed and the heating up stage of 120-$290^{\circ}C$ in the debinding process was controlled for the most suitable MIM condition.

• 한국작물학회지
• /
• 제42권2호
• /
• pp.141-145
• /
• 1997

원적외선 복사 물질인 세라믹 분말을 벼 기계이앙상토에 혼합하였을 때 벼 유묘의 생장에 미치는 효과를 분석하고, 세라믹 분말의 적정혼합비를 구명하기 위하여 실험을 실시하였다. 공시 품종은 화성벼로 하였고, 세라믹 분말은 $Al_2$O$_3$계를 사용하였다. 시험한 결과를 요약하면 다음과 같다. 1. 시험에 사용한 세라믹 분말의 복사파장 범위는 6~11$mu extrm{m}$이었다. 2. 세라믹 분말의 혼합처리는 무처리에 비하여 초장이 뚜렷하게 증가하였다. 3. 세라믹 분말의 혼합처리는 모의 건물중을 증가시키는 것으로 나타났다. 4. 벼 유묘의 초장을 증가시키는 세라믹 분말의 추정 적정혼합비는 9.6%(240g)인 것으로 나타났다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.972-974
• /
• 2005

The present work deals with the theoretical study of the effects of copper vapours resulting from the erosion of the electrodes on the properties of a SF6 arc in a Laval nozzle. Computations have been done for a DC arc of 1000A with upstream gas pressure of 3.75MPa. The arc plasma is assumed to be in local thermodynamic equilibrium(LTE). The sheath and non-equilibrium region around the electrodes are not considered in this model. However, its effects on the energy flux into the electrodes are estimated from some experimental and theoretical data. The turbulence effects are calculated using the Prandtl mixing length model. A conservation equation for the copper vapour concentration is solved together with the governing equations for mass, momentum and energy of the gas mixture. Comparisons were made between the results with and without electrodes erosion. It has been found that the presence of copper vapours cools down the arc temperature due to the combined effects of increased radiation and increased electrical conductivity. The copper vapour distribution is very sensitive to the turbulent parameter. The erosion of upstream electrode(cathode) has larger effects on the arc compared to the downstream electrode(anode) as the copper vapour eroded from the anode cannot diffuse against the high-speed axial flow.

• Nuclear Engineering and Technology
• /
• 제50권6호
• /
• pp.944-949
• /
• 2018

The mass attenuation coefficients (${\mu}/{\rho}$) of food waste samples (pomegranate peel, acorn cap, lemon peel, mandarin peel, pumpkin peel, grape peel, orange peel, pineapple peel, acorn peel and grape stalk) have been measured employing a Si(Li) detector at 13.92, 17.75, 20.78, 26.34 and 59.54 keV. Also, the theoretical values of the mass attenuation coefficients have been evaluated utilizing mixture rule from WinXCOM program. The results showed that the lemon peel has the highest values of ${\mu}/{\rho}$ among the selected samples. From the obtained mass attenuation coefficients, we determined some absorption parameters such as effective atomic number ($Z_{eff}$), electron density ($N_E$) and molar extinction coefficient (${\varepsilon}$). It was found that the $Z_{eff}$ values of all food wastes lie within the range of 4.034-7.595, whereas the $N_E$ of the studied food wastes was found to be in the range of $0.301-1.720{\times}10^{25}$ (electrons/g) for present energy region.

• Journal of Mechanical Science and Technology
• /
• 제20권2호
• /
• pp.242-250
• /
• 2006

Detailed structures of the counterflow flames formed for different inlet fluid temperatures and different amount of additives are studied numerically. The detailed chemical reactions are modeled by using the CHEMKIN-II code. The discrete ordinates method and the narrow band based WSGGM with a gray gas regrouping technique (WSGGM-RG) are applied for modeling the radiative transfer through non-homogeneous and non-isothermal combustion gas mixtures generated by the counterflow flames. The results compared with those obtained by using the SNB model show that the WSGGM-RG is very successful in modeling the counterflow flames with non-gray gas mixture. The numerical results also show that the addition of $CO_2\;or\;H_2O$ to the oxidant lowers the peak temperature and the NO concentration in flame. But preheat of fuel or oxidant raises the flame temperature and the NO production rates. $O_2$ enrichment also causes to raise the temperature distribution and the NO production in flame. And it is found that the $O_2$ enrichment and the fuel preheat were the major parameters in affecting the flame width.

• 한국산학기술학회논문지
• /
• 제15권7호
• /
• pp.4272-4278
• /
• 2014

광노화의 주요 요인인 자외선으로부터 피부를 보호하는 것은 피부노화를 막는 중요한 해결책 중 하나이다. 이를 위해 자연친화적 친환경적인 다양한 형태의 소재개발이 필요한 실정이다. 이에 본 연구는 미세조류(Chlamydomonas hedleyi.)로부터 Mycosporine-like amino acid (MAA)를 분리 정제 하여 인간 피부세포에서 UV protection 효과를 확인하였다. MAAs 중 porphyra-334를 분리하여 피부세포에서 UV protection 및 항염 효능을 시험하였고 그 결과 porphyra-334가 UV로부터 피부세포를 보호하여 cell viability가 약 26% 정도 증가하였고 COX-2 발현 40% 이상 저해함을 통해 항염 효능을 확인하였다. 이를 통해 porphyra-334의 자외선 차단용 소재뿐 아니라 항염 관련 소재로서의 가능성을 확인할 수 있었다.

• 한국연소학회지
• /
• 제20권4호
• /
• pp.34-41
• /
• 2015

Oxy-methane nonpremixed flames diluted with $CO_2$ were investigated to clarify impact of radiation heat loss and chemical effects of additional $CO_2$ to oxidizer stream on flame extinction. Flame stability maps were presented with functional dependencies of critical diluents mole fraction upon global strain rate at several oxidizer stream temperatures in $CH_4-O_2/N_2$, $CH_4-O_2/CO_2$, and $CH_4-O_2/CO_2/N_2$ counterflow flames. The effects of radiation heat loss on the critical diluent mole fractions for flame extinction are not significant even at low strain rate in nonpremixed $CH_4-O_2/N_2$ diffusion flame, whereas those are significant at low strain rate and are negligible at high strain rate (> $200s^{-1}$) in $CH_4-O_2/CO_2$ and $CH_4-O_2/CO_2/N_2$ counterflow flames. Chemical effects of additional $CO_2$ to oxidizer stream on the flame extinction curves were appreciable in both $CH_4-O_2/CO_2$ and $CH_4-O_2/CO_2/N_2$ flames. A scaling analysis based on asymptotic solution of stretched flame extinction was applied. A specific radical index, which could reflect the OH population in main reaction zone via controlling the mixture composition in the oxidizer stream, was identified to quantify the chemical kinetic contribution to flame extinction. A good correlation of predicted extinction limits to those calculated numerically were obtained via the ratio between radical indices and oxidizer Lewis numbers for the target and baseline flames. This offered an effective approach to estimate extinction strain rate of nonpremixed oxy-methane flames permitting air infiltration when the baseline flame was taken to nonpremixed $CH_4-O_2/N_2$ flame.