• Journal of agriculture & life science
• /
• v.45 no.5
• /
• pp.63-71
• /
• 2011

This study was conducted to determine the effects of increasing the dietary levels of conjugated linoleic acid (CLA) which is produced from bio diesel by-products, on milk yield, milk composition, and blood metabolites of mid-lactating dairy cows. A total of 20 mid-lactating dairy cows ($631{\pm}25.0kg$) were assigned to one of four treatment groups and fed twice daily an equal amount of a basal diet ($NE_L$ 32 Mcal/d, CP 17%) contained 12kg/d of concentrate, 15kg/d of corn silage and 4kg/d of the hay mixture (tall fescue+orchard grass). Conjugated linoleic acid were fed for 2 weeks of adaptation periods and 4 weeks of collection periods at 0 (Control), 50 (T1), 100 (T2) and 150g/d (T3), respectively. By the increases of dietary CLA supplementation, milk yield and 4% fat corrected milk increased, whereas milk fat content decreased (p<0.05). The concentrations of stearic acid and oleic acid decreased with increasing dietary CLA supplementation, while the concentrations of total CLA increased (p<0.05). In conclusion, this study shown that the supplementation of dietary CLA manufactured from bio diesel by-products could improve milk yield and CLA concentrations of milk in mid-lactating dairy cows.

• Food Science and Preservation
• /
• v.25 no.1
• /
• pp.7-18
• /
• 2018

In this study, soy-powder yogurt (SPY) with enhanced levels of ${\gamma}$-aminobutyric acid (GABA) and isoflavone aglycone was produced from sprouting high-protein soybeans (HPSs). The fermented steam-HPS sprouts (0 to 4 cm) were fermented (72 h) with Lactobacillus brevis, and the total free amino acids (FAAs) of the formed mixtures were determined to be 79.53, 489.93, 877.55, 780.53, and 979.97 mg/100 mL in the fermented HPS (FHPS), and the fermented steam-HPS with 0 cm (FSHPS-0), 1 cm (FSHPS-1), 2 cm (FSHPS-2), and 4 cm sprouting lengths (FSHPS-4), respectively. The levels of glutamic acid (GA) and GABA were observed to be the highest, 100.31 and 101.60 mg/100 mL, respectively, in the unfermented HPS (UFSHPS-1, 1 cm) and FSHPS-1 sprouts, respectively. Moreover, the total contents of the isoflavone glycoside form decreased proportionally to the increasing total levels of isoflavone aglycones after fermentation in FSHPS-0, FSHPS-1, FSHPS-2, and FSHPS-4. The levels of isoflavone aglycones were detected as 350.34, 289.15, 361.61, 445.05, and $491.25{\mu}g/g$ in FHPS, FSHPS-0, FSHPS-1, FSHPS-2, and FSHPS-4, respectively. While FSHPS-1 exhibited the highest DPPH (63.28%) and ABTS (73.28%) radical scavenging activities, FSHPS-4 contained the highest isoflavone aglycone ratio (81.63%). All in all, the FSHPS-1 mixture prepared in this study exhibited high GABA content and functional prosperity, thereby making it suitable for potential applications in the soy-dairy industry.

• Korean Chemical Engineering Research
• /
• v.59 no.4
• /
• pp.548-556
• /
• 2021

This study was conducted to investigate the applicability of lignocellulosic fiber and coconut shell activated carbon (CSA) for the production of a particulate matter (PM)-reducing air-filter as raw materials to solve the environmental problems of non-woven fabrics. CSA had a good potential to use as a raw material of air-filter for reducing volatile organic compounds as well as noxious metals, and reduction capability of the CSA was 5 times higher than that of wood fiber. Natural adhesives formulated with proteinaceous wastes mostly were applied successfully to fabricate air-filters with the shape of fiberboard. The air-filter fabricated with the minimum target density of 200 kg/m³ and the maximum CSA-content of 40 wt% in fiberboard had a good manageable strength. However, the fiberboard filters was required to make vent-holes for improving an air-permeability of the filters. Size of the CSA particles was adjusted to greater than 2 mesh with the consideration of strength and formability of the fiberboard. Three-layers fiberboard that only wood fiber and the mixture of wood fiber and CSA were formed in the surface and middle layers, respectively, was determined to the optimal condition for the production of air-filters. In addition, traditional Korean paper handmade from mulberry trees (TKP) showed a good PM-reducing property as an air-filter. It is concluded that air-filtering set composed of fiberboard with vent-holes and TKP instead of conventional air-filters made with non-woven fabrics can be used as a filter for reducing the concentrations of PM, VOC and noxious metals existed in indoor and outdoor spaces.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.27 no.3
• /
• pp.49-61
• /
• 2019

Swine manure has been recognized as a organic sources for composting and many research was conducted to efficiently utilize and treat. This study was to evaluate a feasibility for producing swine manure compost under various treatment with mixture of swine manure and saw dust. Treatments were designed as follows; non aerated composting pile(REF), aerated composting pile of $100L/m^3$(EXP1), and aerated composting pile of $150L/m^3$(EXP2). The total days of fermentation were 28 days and each samples were collected at every 7 days from starting of composting. Temperature sensors were installed under 30~40cm from the surface of composting pile. Inner temperature in composting piles of EXP1 and EXP2 was rapidly increased to $67{\sim}75^{\circ}C$ within 1~2 days. The elevated temperatures found during the thermophilic phase are essential for rapid degradation of organic materials. While swine manure composted, moisture content, total nitrogen, EC of EXP1, EXP2 in sample at 28 days were lower than those of REF. But, pH and organic matter of EXP1, EXP2 in sample at 28 days were higher than those of REF. After finishing fermentation experiment, maturity was evaluated with germination test. Calculated germination index(GI) at REF, EXP1 and EXP2 were 23.49, 68.50 and 51.81, respectively. The values of germination index were higher at EXP1 and EXP2 which is aerated composting piles than REF which is non aerated composting pile. According to the results, composting process by aerated static pile compost had significant effect on the reduction of required period for composting. Supplying adequate amount of air to compost swine manure will greatly reduce composting period.

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.4
• /
• pp.11-18
• /
• 2021

A novel microwave dielectric composite material for ultra-low temperature co-fired ceramics (ULTCC) with (1-x)BaWO₄-xBaV₂O₆ (x=0.54~0.85) composition was prepared by firing a mixture of BaWO₄ and BaV₂O₆. Shrinkage tests showed that the ceramic composite begins to densify at a temperature as low as 550℃ and can be sintered at 650℃ with 98% of relative density under the influence of BaV₂O₆. X-ray diffraction analysis showed that BaWO₄ and BaV₂O₆ coexisted and no secondary phase was detected in the sintered bodies, implying good chemical compatibility between the two phases. Near-zero temperature coefficients of the resonant frequency (𝛕_f) could be achieved by controlling the relative content of the two phases, due to their positive and negative 𝛕_f values, respectively. With increasing BaV₂O₆ (x from 0.53 to 0.85), the 𝛕_f value of the composites increased from -7.54 to 14.49 ppm/℃, ε_r increased from 10.08 to 11.17 and the quality factor (Q×f value) decreased from 47,661 to 37,131 GHz. The best microwave dielectric properties were obtained for x=0.6 samples with ε_r=10.4, Q×f=44,090 GHz, and 𝛕_f=-2.38 ppm/℃. Chemical compatibility experiments showed the developed composites are compatible with aluminum electrode during co-firing process.

• Food Science and Preservation
• /
• v.31 no.2
• /
• pp.287-297
• /
• 2024

It was confirmed that complex fermentation (CF) was more efficient than single-strain fermentations in inducing changes in the contents of phenolic compounds of Maclura tricuspidate and Pyrus Montana Nakai. A mixture of Maclura tricuspidata, Pyrus montana Nakai, Platycodon grandiflorum and Codonopsis lanceolata were fermented in CF using Aspergillus shirousamii (koji), yeast, and lactic acid bacteria (LAB) for 24 days, and the pH, °Brix, total acidity, anti-oxidant activity, polyphenol content, nitric oxide (NO), and Western blotting of inducible nitric oxide synthase (iNOS), cyclo-oxygenase-2 (COX-2), and tumor necrosis factor-𝛼 (TNF-𝛼) of the sample were determined. There was no significant change in pH and total acidity. °Brix significantly decreased from day 6 onwards. HPLC confirmed that the concentrations of chlorogenic acid, 4-hydrobenzoic acid, vanillic acid, and caffeic acid significantly increased from day 18 during the fermentation. Additionally, DPPH, ABTS radical scavenging activity, total phenol, and total flavonoid were confirmed to be increased until 18 days. NO was significantly inhibited from day 6, along with significant inhibition of iNOS, COX-2, and TNF-a. In conclusion, this study confirmed that CF of low-use (or underutilized) wild vegetables enhances phenolic compounds. It effectively suppresses NO, iNOS, COX-2, and TNF-𝛼, markers of inflammation-related pathogenesis. Altogether, our results suggest that CF of the above plants has a potential anti-inflammatory effect.

• Journal of Korean Society of Forest Science
• /
• v.64 no.1
• /
• pp.11-19
• /
• 1984

Potted, germinating Pinus rigida ${\times}$ P. taeda seedlings were inoculated with Pisolithus tinctorius (Pt) ectomycorrhizal fungus to test the effectiveness of Pt in relation to organic amendment and changes in soil fertility and soil texture. Pt was cultured as mycelia in vermiculite-peat moss mixture with nutrients and added to sterilized pot soils with or without organic amendment (fully fermented compost) at three soil texture levels (sand, loamy sand, and sandy loam) in a factorial design. Plants were grown in a greenhouse for 4 months and harvested to compare their growth with non-mycorrhizal plants and plants infected by natural fungi. Regardless of sod texture, soil fertility, or organic amendment, seedlings inoculated with Pt were better in dry weight and height than non-mycorrhizal plants or those infected by natural fungi. An exception was observed in the most fertile soil (0.075% N and 1.32% organic matter content in sandy loam with organic amendment), where non-mycorrhizal plants were slightly bigger (8%) and heavier (18%) than Pt-inoculated plants. In over-all average, Pt-inoculated seedlings were 30% taller and 107% heavier than those infected by natural fungi and 31 % taller and 60% heavier than non-mycorrhizal plants. Growth stimulation of seedlings by Pt was more pronounced in less fertile sand soil when organic was not amended. Mycorrhizal frequency of Pt (% of mycorrhizal root tips) was reduced to about half (from 84 to 33% in sandy loam and from 77 to 40% in loamy sand) by organic amendment, while that of natural fungi was not significantly affected. Severe nitrogen deficiency was observed in the needles of non-mycorrhizal plants (1.38% N), while both Pt-inoculated plants (1.68% N) and those infected by natural fungi (1.89% N) did not develop symptom, suggesting an active role of mycorrhizae in absorption of soil nitrogen. Top to root ratio increased with organic amendment to non-mycorrhizal plants, but was not significantly affected by fungal treatment. It was concluded from this study that relative effectiveness of Pt was determined by soil fertility. Organic amendment to less fertile sand soil increased effectiveness of Pt, while the same amendment to more fertile loamy sand and sandy loam decreased effectiveness of Pt. Benefits of Pt mycorrhizae would be expected most either when organic was not added to the soil, or when soil nutrients were not abundant.

• The Korean Journal of Petroleum Geology
• /
• v.14 no.1
• /
• pp.1-11
• /
• 2008

As conventional oil and gas reservoirs become depleted, interests for oil sands has rapidly increased in the last decade. Oil sands are mixture of bitumen, water, and host sediments of sand and clay. Most oil sand is unconsolidated sand that is held together by bitumen. Bitumen has hydrocarbon in situ viscosity of >10,000 centipoises (cP) at reservoir condition and has API gravity between $8-14^{\circ}$. The largest oil sand deposits are in Alberta and Saskatchewan, Canada. The reverves are approximated at 1.7 trillion barrels of initial oil-in-place and 173 billion barrels of remaining established reserves. Alberta has a number of oil sands deposits which are grouped into three oil sand development areas - the Athabasca, Cold Lake, and Peace River, with the largest current bitumen production from Athabasca. Principal oil sands deposits consist of the McMurray Fm and Wabiskaw Mbr in Athabasca area, the Gething and Bluesky formations in Peace River area, and relatively thin multi-reservoir deposits of McMurray, Clearwater, and Grand Rapid formations in Cold Lake area. The reservoir sediments were deposited in the foreland basin (Western Canada Sedimentary Basin) formed by collision between the Pacific and North America plates and the subsequent thrusting movements in the Mesozoic. The deposits are underlain by basement rocks of Paleozoic carbonates with highly variable topography. The oil sands deposits were formed during the Early Cretaceous transgression which occurred along the Cretaceous Interior Seaway in North America. The oil-sands-hosting McMurray and Wabiskaw deposits in the Athabasca area consist of the lower fluvial and the upper estuarine-offshore sediments, reflecting the broad and overall transgression. The deposits are characterized by facies heterogeneity of channelized reservoir sands and non-reservoir muds. Main reservoir bodies of the McMurray Formation are fluvial and estuarine channel-point bar complexes which are interbedded with fine-grained deposits formed in floodplain, tidal flat, and estuarine bay. The Wabiskaw deposits (basal member of the Clearwater Formation) commonly comprise sheet-shaped offshore muds and sands, but occasionally show deep-incision into the McMurray deposits, forming channelized reservoir sand bodies of oil sands. In Canada, bitumen of oil sands deposits is produced by surface mining or in-situ thermal recovery processes. Bitumen sands recovered by surface mining are changed into synthetic crude oil through extraction and upgrading processes. On the other hand, bitumen produced by in-situ thermal recovery is transported to refinery only through bitumen blending process. The in-situ thermal recovery technology is represented by Steam-Assisted Gravity Drainage and Cyclic Steam Stimulation. These technologies are based on steam injection into bitumen sand reservoirs for increase in reservoir in-situ temperature and in bitumen mobility. In oil sands reservoirs, efficiency for steam propagation is controlled mainly by reservoir geology. Accordingly, understanding of geological factors and characteristics of oil sands reservoir deposits is prerequisite for well-designed development planning and effective bitumen production. As significant geological factors and characteristics in oil sands reservoir deposits, this study suggests (1) pay of bitumen sands and connectivity, (2) bitumen content and saturation, (3) geologic structure, (4) distribution of mud baffles and plugs, (5) thickness and lateral continuity of mud interbeds, (6) distribution of water-saturated sands, (7) distribution of gas-saturated sands, (8) direction of lateral accretion of point bar, (9) distribution of diagenetic layers and nodules, and (10) texture and fabric change within reservoir sand body.