• 제목/요약/키워드: Mixture Fraction Model

검색결과 163건 처리시간 0.023초

Investigation of Velocity Boundary Conditions in Counterflow Flames

  • Park, Woe-Chul;Anthony Hamins
    • Journal of Mechanical Science and Technology
    • /
    • 제16권2호
    • /
    • pp.262-269
    • /
    • 2002
  • The effects of velocity boundary conditions on the structure of methane-air nonpremixed counterflow flames were investigated by two-dimensional numerical simulation. Two low global strain rates, 12 s$\^$-1/ and 20 s$\^$-1/, were considered for comparison with measurements. Buoyancy was conformed to have strong effects on the flame structure at a low global strain rate. It was shown that the location where a top hat velocity profile was imposed is sensitive to the flame structure, and that the computed temperature along the centerline agrees well with the measurements when plug flow was imposed at the inner surface of the screen nearest the duct exit.

Computations of Compressible Two-phase Flow using Accurate and Efficient Numerical Schemes

  • Kim, Chong-Am
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2006년도 추계 학술대회논문집
    • /
    • pp.13-17
    • /
    • 2006
  • RoeM and AUSMPW+ schemes are two of the most accurate and efficient schemes which are recently developed for the analysis of single phase gas dynamics. In this paper, we developed two-phase versions of these schemes for the analysis of gas-liquid large density ratio two-phase flow. We adopt homogeneous equilibrium model (HEM) using mass fraction to describe different two phases. In the Eulerian-Eulerian framework, HEM assumes dynamic and thermal equilibrium of the two phases in the same computational mesh. From the mixture equation of state (EOS), we derived new shock-discontinuity sensing term (SDST), which is commonly used in RoeM and AUSMPW+ for the stable numerical flux calculation. The proposed two-phase versions of RoeM and AUSMPW+ schemes are applied on several air-water two-phase test problems. In spite of the large discrepancy of material properties such as density, enthalpy, and speed of sound, the numerical results show that both schemes provide very satisfactory solutions.

  • PDF

선회분류 연소기의 연소특성에 관한 연구 (A Study on the Combustion Characteristics of Swirling Jet Combustor)

  • 심순용;손강호;이창식
    • 대한기계학회논문집
    • /
    • 제18권2호
    • /
    • pp.492-501
    • /
    • 1994
  • This study is an analysis of the turbulent diffusion flame with swirl flow and the calculated results are compared with experimental data in case of various swirl numbers and air-fuel rations. The mathematical model is restricted to single-phase, diffusion controlled combustion with swirl flow. Values of local flow properties were obtained by solving appropriate differential equation for continuity, momentum, stagnation enthalpy, concentration, turbulence energy, dissipation rate of turbulence energy, and the mean square of concentration fluctuation. The method is proposed for calculating the local probability of chemical reaction based on the use of the probability density function for the mixture fraction.

대향류 확산화염에 대한 직접수치모사의 검증 (An Evaluation of a Direct Numerical Simulation for Counterflow Diffusion Flames)

  • 박외철
    • 한국안전학회지
    • /
    • 제16권4호
    • /
    • pp.74-81
    • /
    • 2001
  • A direct numerical simulation (DNS) was applied to nonpremixed counter-flow diffusion flames between oxidizer and fuel ducts. The objective of this study is to evaluate the numerical method for simulation of axisymmetric counterflow diffusion flames. Effects of computational domain size and grid size were scrutinized, and then the method was applied to air-methane diffusion flames. The results at zero gravity conditions were in good agreement with those obtained by the one-dimension flame code OPPDIF. It was confirmed thai the numerical method is applicable to the diffusion flames at the normal gravity conditions since the results clearly showed the effects of buoyancy and velocity ratio.

  • PDF

Improvement of thermal buckling response of FG-CNT reinforced composite beams with temperature-dependent material properties resting on elastic foundations

  • Bensaid, Ismail;Kerboua, Bachir
    • Advances in aircraft and spacecraft science
    • /
    • 제6권3호
    • /
    • pp.207-223
    • /
    • 2019
  • Current investigation deals with the thermal stability characteristics of carbon nanotube reinforced composite beams (CNTRC) on elastic foundation and subjected to external uniform temperature rise loading. The single-walled carbon nanotubes (SWCNTs) are supposed to have a distribution as being uniform or functionally graded form. The material properties of the matrix as well as reinforcements are presumed to be temperature dependent and evaluated through the extended rule of mixture which incorporates efficiency parameters to capture the size dependency of the nanocomposite properties. The governing differential equations are achieved based on the minimum total potential energy principle and Euler-Bernoulli beam model. The obtained results are checked with the available data in the literature. Numerical results are supplied to examine the effects of numerous parameters including length to thickness ratio, elastic foundations, temperature change, and nanotube volume fraction on the thermal stability behaviors of FG-CNT beams.

Computer simulation for stability analysis of the viscoelastic annular plate with reinforced concrete face sheets

  • Zhang, Yonggang;Wang, Yonghong;Zhao, Yuanyuan
    • Computers and Concrete
    • /
    • 제27권4호
    • /
    • pp.369-383
    • /
    • 2021
  • This article deals with the frequency analysis of viscoelastic sandwich disk with graphene nano-platelets (GPLs) reinforced viscoelastic concrete (GPLRVC) face sheets and honeycomb core. The honeycomb core is made of aluminum due to its low weight and high stiffness. The rule of the mixture and modified Halpin-Tsai model are engaged to provide the effective material constant of the concrete. By employing Hamilton's principle, the governing equations of the structure are derived and solved with the aid of the Generalize Differential Quadrature Method (GDQM). In this paper, viscoelastic properties are modeled according to Kelvin-Voigt viscoelasticity. The deflection as the function of time can be solved by the fourth-order Runge-Kutta numerical method. Afterward, a parametric study is carried out to investigate the effects of the outer to inner radius ratio, hexagonal core angle, thickness to length ratio of the concrete, the weight fraction of GPLs into concrete, and the thickness of honeycomb core to inner radius ratio on the frequency of the viscoelastic sandwich disk with honeycomb core and FG-GPLRVC face sheet.

토석류 유동층에서 토사체적 농도 특성에 관한 연구 (The Study of Sediment Volume Concentration in Liquefied-Layer of Debris Flow)

  • 김성덕
    • 한국지반환경공학회 논문집
    • /
    • 제15권12호
    • /
    • pp.109-115
    • /
    • 2014
  • 본 연구의 목적은 산지에서 세립사가 포함된 유동체 혼합물이 다양한 경사 각도를 갖는 수로에서 공급유량의 변화에 따른 토사체적농도를 분석한 것이다. 수치모델은 질량보존 및 운동량 보존에 관한 방정식 그리고 세립토와 조립토 방정식에 기초하여 유한차분법을 이용하여 수행되었다. 비탈 경사면 각도 변화에 따른 토사농도 비교에서 경사가 급할수록 토사체적 농도의 급격한 변곡점이 나타났다. 공급유량의 변화에서는 공급유량이 많을수록 Fluctuation이 발생하였고, 토석류의 상태가 난류형으로 변하여 토사가 부유사 형태로 변화되었다. 이는 토석류의 이동속도가 빠르게 됨을 알 수 있다. 포화된 조립토의 변화에 따른 비교에서는 그 길이가 길수록 고농도가 발생하였으므로 사면 안정을 위해서는 사면에서의 침식 가능 여부를 먼저 판단해야 된다. 본 연구의 결과는 강우 변화에 따른 비탈면 하류단에서의 유동체 혼합물의 토석류에 의한 재해를 예측 및 다양한 경사의 비탈면을 갖는 산지 밑에서의 토석류에 의한 재해에 대한 정보를 제공할 것이다. 또한 사면 안정 시 효율적인 사면 경사각도로 설치하는 것과 사면에서의 침식 방지등에 있어 토석류와의 관계성 분석 및 토석류 재해를 막기 위한 다양한 대책을 세우는 데 효과적인 정보를 제공할 것이다.

산림지역의 항공기 탑재 하이퍼스펙트럴 영상에 대한 식생-Endmember와 식생지수의 상관 분석 (Correlation Analysis with Vegetation Indices and Vegetation-Endmembers From Airborne Hyperspectral Data in Forest Area)

  • 김태우;위광재;서용철
    • 한국지리정보학회지
    • /
    • 제15권3호
    • /
    • pp.52-65
    • /
    • 2012
  • 작물과 산림을 포함한 식생에 대한 순1차 생산(net primary production, NPP)와 총1차 생산(gross primary production, GPP)은 바이오매스와 식생의 탄소저장과 밀접한 관련이 있으며, 원격탐사를 이용해 바이오매스를 추정하는 많은 노력이 이루어지고 있다. 바이오매스는 광합성에 매우 중요한 요소인 클로로필(엽록소)의 총 함유량으로 추정할 수 있는데, 클로로필을 추정하기 위해서 다양한 식생지수들이 개발되었다. 식생지수들은 개발에 사용된 식생의 종류와 원격탐사 데이터에 따라 조금씩 차이를 가지고 있다. 하이퍼스펙트럴 영상은 다중분광 영상에 비하여 세분화된 각 파장대마다 물질에 따른 반사 및 흡수 특성이 다르기 때문에, 기존의 식생지수를 그대로 사용하기에 무리가 따른다. 본 연구는 항공기 탑재 하이퍼스펙트럴 영상을 이용하여 산림에 대한 바이오매스 추정을 위한 매개변수로 활용되는 적합한 식생지수는 무엇인지 평가하는 것을 목적으로 한다. 이를 위해 하이퍼스펙트럴 영상의 밴드 특성을 고려하여 다수의 식생지수 산출식 중 9개를 선정하고, SMA(spectral mixture analysis)를 통하여 대상지역의 산림을 대표하는 3개의 endmember를 추출하였다. 9개의 식생지수와 추출된 endmembers의 상관관계를 분석하였다. 상관분석 결과는 산림이 분포된 지역에서 Pearson 상관계수는 MTVI1과 TVI가 0.877의 상관계수를 가졌으며, 식생이 적고 토양의 분포가 확연한 지역에서는 MCARI가 0.9061로 매우 높은 상관계수를 보였다. 전반적으로 MTVI1과 TVI이 0.757의 동일한 상관계수를 가지며 식생에 대한 3개의 endmember를 가장 잘 설명하는 것으로 나타났다.

Amino acid Thiohydantoin 유도체(誘導體)의 질량분석(質量分析) (제II보)(第II報) (Mass Spectrometric Identification of Thiohydantoins Derived from Amino Acids (II))

  • 송경덕
    • 한국식품영양과학회지
    • /
    • 제3권1호
    • /
    • pp.69-76
    • /
    • 1974
  • The method of amino acid sequence determination from the C-terminal amino acid is proposed and mass spectrometric identification of thiohydantoins described previously. In this paper was discussed the fragmentation of thiohydantoin-ring by deutero substitution and model tripeptide have been degraded through three stages each, with interpretable results. The conditions employed in this method are mild enough for biological materials. The main features of the method are the following. 1. Thiohydantoins were formed in a non-aqueous medium a mixture of acetic anhydride, acetic acid and ammonium thiocyanate. 2. Mass sepectra of thiohydantoins derived from 20 amino acids were obtained with a mass spectrometer, JEOL model JMS-06H. 3. Cleavage of peptidyl thiohydantoin was made with an acidic from of a cation-exchange resin. (Amberlite IR-120) 4. Separation of the cleaved thiohydantoin and the parent peptide less one amino acid moiety was made by chromatography on a Sephadex G-10 column. 5. The peptide fraction was concentrated by freezedrying. 6. Thiohydantoin derivative of carboxyl terminal amino acid residue was introduced with a direct inlet probe in methanol solution.

  • PDF

이동식 미분무수 노즐의 소화 특성에 대한 수치 시뮬레이션 (Thermal Numerical Simulation on Fire Suppression Characteristics through Mobile Mist Spray Nozzles)

  • 배강열;정희택;김형범;정인수;김창
    • 동력기계공학회지
    • /
    • 제13권5호
    • /
    • pp.25-33
    • /
    • 2009
  • In the present study, the numerical investigation has been carried out to see the effects of water mist sprays on the fire suppression mechanism. The special-purposed program named as FDS was used to simulate the interaction of fire plume and water mists. This program solves the fire-driven flows using LES turbulence model, the mixture fraction combustion model, the finite volume method of radiation transport for a non-scattering gray gas, and conjugate heat transfer between wall and gas flow. The computational domain was composed of a rectangular space dimensioned as $L{\times}W{\times}H=4.0{\times}4.0{\times}2.5\;m^3$ with a mist-injecting nozzle installed 1.0 m high from the fire pool. In this paper, two types of nozzles were chosen to compare the performance of the fire suppression. Numerical results showed that the nozzle, type A, with more orifices having smaller diameters had poorer performance than the other one, type B because the flow injected through side holes deteriorated the primary flow. The fire-extinguishing time of type A was 2.6 times bigger than that of type B.

  • PDF