• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.5
• /
• pp.899-904
• /
• 2004

The objectives of the experiment were to examine the effects of extrusion process variables on the yield of extruded ginseng extract and to determine the effect of ratio of extruded ginseng extract and microcrystalline cellulose on characteristics of spheronized granules by cold extrusion-spheronization process. Extrusion process variables observed were feed moisture (15, 22, 29%), die temperature (90 110 13$0^{\circ}C$) and screw speed (150 200, 250 rpm). The results showed that moisture content of dried ginseng significantly affected extraction yield (P<0.05). The less moisture content of the feed resulted in the higher yield of the extract. Moisture content of 15%, screw speed of 250 rpm and die temperature of 13$0^{\circ}C$ gave the highest yield of ginseng extract. Mean extraction yield of extruded ginseng using hot water extraction was greatly improved by extrusion process The extract yield of extruded ginseng was 43.5% which was higher than that of red ginseng (38.3%) and white ginseng (29.0%) produced by traditional process. It was possible to make from the mixture of microcrystalline cellulose (200 g) mixed with different concentration of 200 mL solution (0, 5, 20, 30 40 50 60% of ginseng extract with 59.2% dry solid) by using cold extrusion spheronization. When the concentration of ginseng extract Increased, the granulation yield was improved but friability and compression index were reduced. Ginseng extract such as saponin was completely released from spheronized granules in distilled water within 10 min. It can be concluded that spheroniged granule with ginseng extract could be packed in gelatin capsule since granules Possessed proper physical properties and quick release of saponin.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.7
• /
• pp.828-834
• /
• 2006

We investigated whether two-kinds of mixture (NHDT-1 and NHDT-2) mainly composed of Hovenia dulcis Thunb had beneficial actions for alcohol and acetaldehyde degradation in acute alcohol treatment and liver protection from fatty liver induced by chronic alcohol administration. In acute alcohol degradation experiment, serum alcohol and acetaldehyde concentrations exhibited lower 1, 3 and 5 hours after taking 3 g ethanol per kg body weight in NHDT-1 treated rats, but not NHDT-2 including ginseng. On the contrast to the acute effect on alcohol degradation, the long-term alcohol administration revealed that NHDT-2, not NHDT-1, protected the increase in serum concentration of aspartate aminotransferase, alanine aminotrasferase and ${\gamma}-triglyceride$ metabolism similar to the rats not consuming alcohol, leading to decreased triglyceride accumulation in blood and liver. In liver morphological study, NHDT-1 preserved the regular hepatocyte morphology, decreased fat accumulation and reduced sinusoidal leukocyte infiltration in hepatocytes. In conclusion, NHDT-1 plays an important role in alcohol and acetaldehyde degradation without protecting liver damage while NHDT-2 works as hepatocyte protector from alcohol mediated damage.

• Journal of agriculture & life science
• /
• v.44 no.5
• /
• pp.9-13
• /
• 2010

This study was conducted to identify the possibility of utilization of coconut substrates for nutrition culture of cut-chrysanthemum. The materials of substrate were composed of dust, fiber, and chip from coco-nut fruit. Dust was used in dust (100%), and dust+chip and +fiber were used in the ratio of 7:3 (v:v), respectively, as coconut mixture substrate. Perlite was used as control in this experiment. Water content in the perlite medium was lower than in dust substrate. The pH of all coconut substrates ranged from 6.5 to 5.8, whereas perlite substrate ranged from 7.3 to 6.7. While, EC of dust substrates shown to be highest but perlite substrate was lowest. The growth of chrysanthemum such as stem length, leaf area, and dry matter showed better results in coconut substrates than that of perlite and dust. However, there was no differences days to in flowering among treatments.

• FLOWER RESEARCH JOURNAL
• /
• v.18 no.1
• /
• pp.50-56
• /
• 2010

This experiment was carried out to examine the effect of a silicate fertilizer on the growth and development of potted plants. Cutting of Kalanchoe blossfeldiana 'Kaluna' and 'Taos', and Dianthus caryophyllus L. 'Kazan' and 'Tula' were grown in 50 and 128-cell plug trays, respectively. Rooted cuttings transplanted to the mixture of a commercial medium and perlite (5:1, v/v) supplemented with a silicate fertilizer at 0, 40, 80, 120 or $160g{\cdot}L^{-1}$ medium was evaluated. A silicate fertilizer supplementation at $40g{\cdot}L^{-1}$ medium resulted in the greatest plant height, leaf thickness, and root fresh and dry weights in both kalanchoe and carnation. However, plant height was suppressed in the treatment of a silicate fertilizer supplementation at higher concentrations in both kalanchoe and carnation. According to the scanning electron microscope images of transversal sections of tissues of roots and leaves in kalanchoe and carnation, the treatment of a silicate fertilizer supplementation at $40g{\cdot}L^{-1}$ medium resulted in plants with more compact tissue than the control.

• Korean Journal of Soil Science and Fertilizer
• /
• v.4 no.1
• /
• pp.21-26
• /
• 1971

Present work is concerned with the effects of a soil amendment (a mixture of basic slag with trace elements Cu, Mn, Zn and B) on the phosphate uptake by rice plants and in improving yield of rice in low productive paddy soils. The experiment was conducted at Kimpo-myun, Kimpo-kun, Kyunggi province which is characterized as "Akiochi" area and split plot experimental design was adapted. The results are summarized as follows; 1. Combined effect of the soil amendment and phosphate applications on the grain yield is pronounced, which is also characterized by the increased grain weight, maturing rate and seed setting rate. 2. Treatment of soil amendment appears to improve phosphate efficiency; grain weight, maturing rate and seed setting rate are all improved as the rate of phosphate application increased. 3. Phosphate tends to accelerate plant growth at earlier stages of plant development while the soil amendment retards the growth, inhibiting excessive tillering. 4. The soil amendment increases silicate and manganese, but decreases phosphate, copper and Zinc contents in the rice plants.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.3
• /
• pp.321-330
• /
• 2011

The physical properties of horticultural substrate are important for optimal plant growth. The physical properties should be properly maintained during the crop growing season for producing higher yield. This experiment was carried out to evaluate the physical properties of different mixtures from various raw materials as horticultural substrates. The mixtures at the different ratios of peatmoss, perlite and vermiculite subjected to 10:0:0, 8:2:0, 6:4:0, 4:6:0, 2:8:0, 0:8:2, 0:10:0, 0:6:4, 0:4:6, 0:2:8, 8:0:2, 0:0:10, 6:0:4, 4:0:6, 2:0:8, 2:6:2, 2:4:4, 4:2:4, 4:4:2, 6:2:2 and 2:2:6 were prepared and analyzed according to two methods of the European Standardization (EN) and Rural Development Administration (RDA). The optimum range of physical properties of a specific horticultural substrate can be predicted using physical-property-triangle. This triangle can also be used to convert a physical property from the EN method to that from the RDA method. Results showed that the mixture at a ratio of > 60% peatmoss, in most cases, is in the range of optimum physical condition for plant growth. We conclude that the developed physical-property-triangle can be suitable to suggest the optimum ratios of horticultural substrates used in this study.

• Korean Journal of Remote Sensing
• /
• v.37 no.6_1
• /
• pp.1709-1718
• /
• 2021

The waveform data of the Airborne Bathymetric LiDAR (ABL; LiDAR: Light Detection And Ranging) system provides data with improved accuracy, resolution, and reliability compared to the discrete-return data, and increases the user's control over data processing. Furthermore, we are able to extract additional information about the return signal. Waveform decomposition is a technique that separates each echo from the received waveform with a mixture of water surface and seabed reflections, waterbody backscattering, and various noises. In this study, a new waveform decomposition technique based on a Gaussian model was developed to improve the point extraction performance from the ABL waveform data. In the existing waveform decomposition techniques, the number of decomposed echoes and decomposition performance depend on the peak detection results because they use waveform peaks as initial values. However, in the study, we improved the approximation accuracy of the decomposition model by adding the estimated potential peak candidates to the initial peaks. As a result of an experiment using waveform data obtained from the East Coast from the Seahawk system, the precision of the decomposition model was improved by about 37% based on evaluating RMSE compared to the Gaussian decomposition method.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2019.04a
• /
• pp.43-43
• /
• 2019

Deparia pycnosora (Christ) M. Kato is a fern used as ornamental plant. In addition, it is called "Teol-go-sa-ri" in Korean name. The aim of this study was to develop a practical propagation method of D. pycnosora using tissue culture technique. Prothallus obtained from spore germination was the used as experiment materials. The prothalli (300 mg) used in all experiments were sub-cultured for 8-week intervals. The most suitable media for prothallus propagation were identified by culturing 300 mg of prothalli in $1/4{\times}$, $1/2{\times}$, $1{\times}$, $2{\times}$ MS medium and in Knop medium for 8 weeks. Also, the prothalli were cultured by chopping with a scalpel. In addition, sucrose, activated charcoal, and total nitrogen source were added in different concentrations based on the culture medium selected. Cultures were maintained at a temperature of $25{\pm}1^{\circ}C$, light intensity of $30{\times}1.0{\mu}mol-m-2{\cdot}s-1$, and a photoperiod of 16/8 h (light/dark) in in vitro. The results showed that optimum was achieved prothallus fresh weight and development in $1{\times}$ MS medium. When other components were added to the basic $1{\times}$ MS medium, prothallus propagation was maximized in $1{\times}$ MS medium supplemented with 2% sucrose, 0.2% activated charcoal, and 60 mM total nitrogen. To select a suitable soil mixture for sporophyte formation, 1.0 g of prothallus was blended with distilled water, spread on five combinations of different soil substrates (decomposed granite, horticultural substrates, peat moss, and perlite), and cultivated for 12 weeks. The sporophyte cultures were maintained at a temperature of $25{\pm}1^{\circ}C$, light intensity of $43{\pm}2.0{\mu}mol-m-2{\cdot}s-1$, humidity of $84{\pm}1.4%$, and a photoperiod of 16/8 h (light/dark). As a results, horticultural substrate alone, 2:1 (v:v) mixtures of horticultural substrate and perlite, and 2:1 mixtures of horticultural substrate and decomposed granite induced 208.0, 201.3 and 248.8 sporophytes per pot, respectively. Therefore, this result could provide a practical mass propagation method of D. pycnosora

• Journal of the Korean Geosynthetics Society
• /
• v.18 no.1
• /
• pp.67-77
• /
• 2019

The grouting method is utilized to reinforce and waterproof poor grounds, enhance the bearing capacity of structures damaged resulting from settlement due to elevation and vibration or differential settlement, and for cutoff. The purpose of this research is to enhance the compressive strength of grout materials by using aramid fiber and develop a high-strength ground improvement method by using blast furnace slag powder. In this regard, this study has conducted a uniaxial compression test after checking the high charge (higher than 50%) of the ratio of blast furnace slag powder and cement at 100:0, 70:30 and 40:60%, adding the aramid mixture based on 0, 0.5 and 1.0% of the cement and furnace slag powder weight and creating sand gels based on surface oiling rate of 0.7 and 1.2%. For the environmental review evaluation, a heavy metal exudation test and a pH test measurement have been conducted. The experiment results showed that 1% increase of aramid fiber led to 1.3 times greater uniaxial compression intensity. As for the hexavalent chrome, a 30% increase in blast furnace slag powder led to approximately 50% decrease in heavy metal exudation. However, the pH test revealed that a 30% increase in blast furnace slag powder resulted in approximately 0.5 increase in pH. Further research on the pH part is needed in the future.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.503-509
• /
• 2019

The demand for smaller, faster, and multi-functional mobile devices in increasing at a rapidly increasing rate. In response to these trends, Stacked Chip Scale Package (SCSP) is used widely in the assembly industry. A film type adhesive called die attach film (DAF) is used widely for bonding chips in SCSP. The DAF requires high flowability at high die attachment temperatures for bonding chips on organic substrates, where the DAF needs to feel the gap depth, or for bonding the same sized dies, where the DAF needs to penetrate bonding wires. In this study, the mixture design of experiment (DOE) was performed for three raw materials to obtain the optimized DAF recipe for low elastic modulus at high temperature. Three components are acrylic polymer (SG-P3) and two solid epoxy resins (YD011 and YDCN500-1P) with different softening points. According to the DOE results, the elastic modulus at high temperature was influenced greatly by SG-P3. The elastic modulus at $100^{\circ}C$ decreased from 1.0 MPa to 0.2 MPa as the amount of SG-P3 was decreased by 20%. In contrast, the elastic modulus at room temperature was dominated by YD011, an epoxy with a higher softening point. The optimized DAF recipe showed approximately 98.4% pickup performance when a UV dicing tape was used. A DAF crack that occurred in curing was effectively suppressed through optimization of the cure accelerator amount and two-step cure schedule. The imizadole type accelerator showed better performance than the amine type accelerator.