• Korean Journal of Remote Sensing
• /
• v.22 no.2
• /
• pp.141-151
• /
• 2006

UV-visible absorption measurement techniques using several horizone viewing directions in addition to the traditional zenith-sky pointing have been recently developed in ground-based remote sensing of atmospheric constituents. The spatial distribution of various trace gases close to the instrument can be derived by combing several viewing directions. Multi-axis differential optical absorption spectroscopy (MAX-DOAS) technique, one of the remote sensing techniques for air quality measurements, uses the scattered sunlight as a light source and measures it at various elevation angles (corresponding to the viewing directions) by sequential scanning with a stepper motor. A MAX-DOAS system developed by GIST/ADEMRC has been applied to measuring trace gases in urban air and plumes of the volcano and fossil fuel power plant in January, May, and October 2004, respectively. MAX-DOAS spectra were analyzed to identify and quantify $SO_2,\;NO_2,\;BrO,\;and\;O_4$ (based on Slant Column Densities, SCD) in the urban air, volcanic plume, and fossil fuel power plant utilizing theirs specific structured absorption features in the UV-visible region. Vertical scan through the multiple elevation angles was performed at different directions perpendicular to the plume dispersion to retrieve cross-sectional distribution of $SO_2\;or\;NO_2$ in the plumes of the volcano and fossil fuel power plant. Based on the estimated cross sections of the plumes the mixing ratios were estimated to 580 $SO_2$ ppbv in the volcanic Plume, and 337 $NO_2\;and\;227\;SO_2$ ppbv in the plume of the fossil fuel power plant, respectively.

• Journal of the Korean Society of Radiology
• /
• v.12 no.6
• /
• pp.777-783
• /
• 2018

The purpose of this study was to investigate the degree of tearing of the rubber when the spike of the syringe connector was connected to the bottle of the contrast medium composed of the rubber compound type and to investigate the presence of the synthetic rubber due to tearing and grinding and the size of the pulverized product when the pulverized matters rubber was detected. As a result, in the case of tearing degree, the front side of the first contact with the end of the syringe connector was torn more than the back side by about $3.14{\pm}0.04mm$, and the pulverized matters was detected on average 7 to 15 on the 10 contrast mediums. The average particle size was measured to be about $7.89{\pm}0.31{\mu}m$. In addition, it is necessary to develop a micro_filter type automatic injection system for blocking off the pulverized matters as well as additional experiments through various experiments and analysis methods, and it is considered that interest of related organizations will be needed in preparation of fatal accidents when pulverized matters is introduced.

• Journal of Broadcast Engineering
• /
• v.24 no.3
• /
• pp.472-484
• /
• 2019

This paper proposes a time-domain sound event detection algorithm using DNN (Deep Neural Network). In this system, time domain sound waveform data which is not converted into the frequency domain is used as input to the DNN. The overall structure uses CRNN structure, and GLU, ResNet, and Squeeze-and-excitation blocks are applied. And proposed structure uses structure that considers features extracted from several layers together. In addition, under the assumption that it is practically difficult to obtain training data with strong labels, this study conducted training using a small number of weakly labeled training data and a large number of unlabeled training data. To efficiently use a small number of training data, the training data applied data augmentation methods such as time stretching, pitch change, DRC (dynamic range compression), and block mixing. Unlabeled data was supplemented with insufficient training data by attaching a pseudo-label. In the case of using the neural network and the data augmentation method proposed in this paper, the sound event detection performance is improved by about 6 %(based on the f-score), compared with the case where the neural network of the CRNN structure is used by training in the conventional method.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.2
• /
• pp.71-76
• /
• 2019

Recently, the demand of labels for product management is increasing, as the automation system becomes more common. the development of functional labels which can be used in various environments has been rapidly proceeded. In the case of a printed circuit board, barcode labels with thermal and chemical stability are generally used due to a high temperature process around $300^{\circ}C$ and chemical cleaning in the manufacturing process. However, the yellowing phenomenon of labels that can lower the resolution of printed barcode image still needs to be prevented. In this study, we prepared a composite coating layer using a silica inorganic binder and a titanium dioxide white pigment, and developed a functional labels with thermal and chemical stability. The silica inorganic binder prepared by sol-gel process was confirmed to show excellent adhesion and abrasion resistance with the polyimide film. The white coating layer could be formed on the polyimide film with mixing the silica inorganic binder and titanium dioxide white pigment. The prepared coating layer showed excellent whiteness and glossiness above $400^{\circ}C$. The excellent chemical stability of the coating layer was also confirmed by the chemical treatment with acidic (pH 1.6) and basic (pH 13.6) cleaners.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.6
• /
• pp.800-807
• /
• 2019

Objective: The aim was to evaluate backgrounding beef steers on oat + ryegrass pastures mixed with vetch and/or using energy supplementation. Methods: A randomized block design with three treatments and three replications was used. The treatments were: grass + supplement (oat + ryegrass + supplementation), legume + supplement (oat + ryegrass + vetch + supplementation) and grass + legume (oat + ryegrass + vetch). A continuous grazing system with a variable stocking rate was used. Twenty-seven intact crossbred steers (1/4 Marchigiana, 1/4 Aberdeen Angus and 2/4 Nellore) aged 7 months old and average weight of 190 kg were used. Steers were supplemented at 1% of the body weight of ground corn. The experiment lasted 84 days, between May and August 2014. Behavioral assessments were performed two times per experimental period, for 24 hours. Results: The forage mass was different between treatments, being greater for steers fed without legume. The accumulation rate, forage allowance, and stocking rate did not differ between treatments due to the adequate adjustment of forage allowance. The final weight of animals, as well as the dry matter intake (kg/d), did not differ between treatments. However, forage intake was higher for non-supplemented animals in relation to supplemented steers. Supplement intake did not alter the total digestible nutrient intake due to pasture quality. Animals fed grass + supplement had higher live weight gain per area than those fed grass + legume. Animals without supplementation spent more time in grazing. Conclusion: Feeding behavior was not altered by mixing with vetch or supplementation. Non-supplemented animals started the grazing peak earlier and spent more time in grazing than those supplemented; however, the average daily gain was similar between treatments. The live weight gain per hectare was 47% higher in pastures in which the animals received supplementation compared with those mixed with vetch, a consequence of the substitutive effect.

• Fisheries and Aquatic Sciences
• /
• v.24 no.1
• /
• pp.32-40
• /
• 2021

Monitoring fish movement is important to understand how physiology adapts to environmental change. To explore the applicability of a video tracking system for determining if chemical cues attract or repel aquatic animals, the movement patterns of rock bream, Oplegnathus fasciatus, were analyzed upon exposure to various materials, including extracts of sea urchin, rock worm, bait worm, krill, barley kernel, and commercial fish feed. Pellets were prepared by mixing freeze-dried tissues with a cellulose and corn flour mixture. Behavioral analysis was carried out with five fish that had been acclimated in the adaptation zone of a Y-shaped tank. Preference toward chemical cues was quantified by assessing the frequency rock bream were observed in a discrete zone around the test material located at the end of each arm and the duration each fish stayed in each zone. The analysis of fish movement upon exposure to commercial feed and barley kernel at each end, respectively, indicated a clear preference toward the feed relative to the barley kernel. Movement responses were further tested with pellets containing extracts of sea urchin, one of the species collected on a large scale, and other materials including krill and worms. A stronger preference toward sea urchin (100%) was observed based on the duration of stay in the test zone, compared to krill (90.1 ± 44.2%), bait worm (81.1 ± 39.1%), rock worm (73.7 ± 28.9%), and barley (63.9 ± 25.9%), under the conditions tested. A detailed comparison of rock bream movements toward each material revealed significant differences in frequency and duration, respectively, between pairs of test materials including krill (74 ± 29.8 and 375.6 ± 118.9) vs. rock worm (41.5 ± 18.7 and 160.2 ± 42.6), krill (86.3 ± 22.9 and 477.1 ± 84) vs. bait worm (36.2 ± 5.5 and 166.1 ± 50.7), and rock worm (45.9 ± 26.2 and 213.7 ± 100.1) vs. bait worm (34.6 ± 21.7 and 159.5 ± 98.5). Rock bream exhibited preference for the test materials in the following order: commercial fish feed > sea urchin > krill > rock worm > bait worm > barley. The results suggest a higher potency of sea urchin extract as a rock bream fishing bait compared to the other materials that are used as commercial bait.

• Journal of Korean Society on Water Environment
• /
• v.27 no.4
• /
• pp.467-474
• /
• 2011

In an effort to investigate water pollution characteristics of Juam lake, water samples were collected from three sites (Sites A, B, and C) of Oenam stream which is a typical tributary of rural watershed in the lake and analyzed for N concentration and the corresponding isotope ratio (${\delta}^{15}N$) of ${NO_3}^-$. Concentrations of ${NO_3}^-$ were not dramatically different among the sites; $0.8{\pm}0.2mgNL^{-1}$ (range: $0.0{\sim}4.3mgNL^{-1}$) for Site A, $1.1{\pm}0.2mgNL^{-1}$ ($0.0{\sim}4.3mgNL^{-1}$) for Site B, and $1.1{\pm}0.1mgNL^{-1}$ ($0.1{\sim}2.6mgNL^{-1}$) for Site C. Meanwhile, ${\delta}^{15}N$ tended to decrease with river flow; it was highest for Site A ($45.5{\pm}5.3$‰) followed by Site B ($19.7{\pm}2.0$‰) and Site C ($8.7{\pm}1.5$‰). Such high ${\delta}^{15}N$ values of ${NO_3}^-$ in Site A suggested that ${NO_3}^-$ derived from livestock feedlot (specifically livestock excrete of which ${\delta}^{15}N$ is higher than 10‰) is the predominant pollution sources despite mountainous area occupied the most of land-use in the watershed. Using the two-sources isotope mixing model, it was estimated that the contribution of cropping activities (i.e. fertilization) became greater in down-stream area (Sites B and C) due to the higher agricultural land-use than the up-stream area (Site A). Particularly, during the active cropping season, the low contribution of organic pollution sources indicated that domestic sewage was not the predominant pollution source. Therefore, it was suggested that agricultural sources such as livestock farming and cropping rather than mountainous and residential are the dominant sources of water pollution in the study area. These results could be effectively utilized in elucidating water pollution sources in rural areas and selecting water management practices.

• Journal of Biomedical Engineering Research
• /
• v.43 no.3
• /
• pp.136-146
• /
• 2022

In this study, it is intended to provide basic data that can help develop a cardiovascular simulator for performance evaluation of pulse wave detectors by identifying the development status of domestic and overseas cardiovascular simulators. A total of 119 papers were selected by excluding duplicate literature, gray literature, and literature not related to a cardiovascular simulator. Based on the selected literature, the research trend of cardiovascular simulators was analyzed. As a result of analyzing the purpose of the study, most of the simulators were developed to evaluate the hemodynamic properties of artificial hearts and valves. In addition, it was used for simulation evaluation or hemodynamic studies such as pulse wave studies. As a result of analyzing configurations of the simulators, a heart most often consisted of only one left ventricle. For blood vessels, the Windkessel model was most often constructed using chambers and valves. In most studies, blood was reproduced by mixing glycerin and water to reproduce both density and viscosity. In addition, as a result of analysis from the perspective of medical device performance evaluation, simulators for evaluating artificial heart and artificial valves have been studied a lot, whereas simulators for blood pressure, pulse wave, and blood flow devices have been relatively insignificant. Based on the review results, we suggested considerations when developing a simulator for performance evaluations of a pulse wave detector.

• Applied Chemistry for Engineering
• /
• v.33 no.6
• /
• pp.636-645
• /
• 2022

In this study, we investigated the adsorption characteristics of methyl orange (MO), an anionic dye, on ginkgo shell-based activated carbon (AC). For this purpose, ACs (GS-1, GS-2, and GS-4) with different textural properties were prepared using ginkgo shells and potassium hydroxide (KOH), a representative chemical activating agent. The correlation between the textural characteristics of AC prepared and the mixing ratio of KOH was investigated using nitrogen adsorption/desorption isotherms. The MO adsorption equilibrium experiment on the prepared ACs was conducted under different pH (pH 3~11) and temperature (298~318 K) conditions, and the results were investigated by Langmuir, Freundlich, Sips and temperature-dependent Sips equations. The feasibility of the MO adsorption treatment process of the prepared AC was also investigated using the dimensionless Langmuir separation factor. The heterogeneous adsorption properties of MO for the prepared AC examined using the adsorption energy distribution function (AED) were closely related to the system temperature and textural characteristics of AC. The kinetic results of the batch adsorption performed at different temperatures can be satisfactorily explained by the homogeneous surface diffusion model (HSDM), which takes into account the external mass transfer, intraparticle diffusion, and active site adsorption. The relationship between the activation energy value obtained by the Arrhenius plot and the adsorption energy distribution function value was also investigated. In addition, the adsorption process mechanism of MO on the prepared AC was evaluated using Biot number.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.12
• /
• pp.7-17
• /
• 2022

The ratios of water and controlled low-strength materials (CLSM) were selected as 1:0.4, 1:0.6, 1:0.8, 1:1.0, and 1:1.2 to minimize the construction and long-term decrease in uniaxial compressive strength due to dry shrinkage through the combination of water, CLSM, and expansion agent. Approximately 2% and 5% of the expansion agent were added for each blending condition. As a result, it was found that the compressive strength decreased and the expandability increased as the specific gravity of the water increased. In addition, it was confirmed that the compressive strength increased rapidly up to 15 days of age compared to the CLSM used in the field. However, the compressive strength decreased compared to the 15 days of the age as of the 28 days of the age. It showed engineering characteristics similar to CLSM generally used in the field. Therefore, the water and the CLSM were mixed at a ratio of 1:0.8, and the field test was performed by adding 5% of an expansion agent. As a result, 28 days after age, the cavity waveform was observed using the handy GPR exploration system, and it was found that cavity waveform was relaxed or disappeared.