• Proceedings of the KIEE Conference
• /
• 2008.10a
• /
• pp.167-168
• /
• 2008

The permeation of $Ca^{2+}$ ions through the materials such as polyvinyl chloride (PVC) and non-halogenated flame retardant cross linked polyolefin (FR-XLPO) used for CN-CV underground distribution power cable jackets was investigated. The permeation of $Ca^{2+}$ ions was found to increase with the increase of time. The FR-XLPO showed higher permeation of $Ca^{2+}$ ions, by a factor of about two, than the PVC. This was explained by the destruction of structural integrity caused by mixing a large amount of mineral flame retardant such as $Mg(OH)_2$ used to impart non-flame ability to the jacket material.

• Journal of Korean Society for Atmospheric Environment
• /
• v.10 no.3
• /
• pp.203-208
• /
• 1994

The trend of visibility variation of Seoul during 1980-1993 is analyzed. Annual average visibility has been decreased during the 1980s except 1988 and 1989 but not decreasing during the early 1990s. Also, the number of days with haze during 1983-1993 did not increase. Mixing height is deemed to be a dominant factor determining visibility. During the period, the difference between the average visibility at 6 p.m and 9 a.m decreased with the average visual range at 9 a.m slightly increased. Thus there is possibility that the effect of Photochemcial reactions becomes noticeable. The number of vehicles and the concentration of criteria air pollutants on the trend of visibility variation of Seoul would not be directly related to the variation of visibility.

• Journal of Powder Materials
• /
• v.18 no.2
• /
• pp.181-187
• /
• 2011

PVDF was used as a polymeric matrix material in this work. Nickel powders with average particles size of 200 nm or 72 nm were used as fillers. PVDF/metal submicro- and nanocomposites were prepared by means of a mixing in twin screw extruder and planetary ball mill, respectively. All samples were prepared by hot pressing method. Their electrical, thermal and morphological properties were examined by dielectric spectroscopy, DSC, FTIR, XRD, optical microscopy and scanning electron microscopy. It was found that all properties of composites were strongly modified depending on the content of metal powders and filler particles size. Particularly, specific volume resistivity of PVDF/Ni composite with 0.2 wt.% of Ni was increased by factor of 1.5~4.

• 한국연소학회:학술대회논문집
• /
• 2001.06a
• /
• pp.180-186
• /
• 2001

Spatially and temporally resolved gas temperature measurements have been made in aeroengine combustor sector rig burning standard kerosene fuel. Temperature PDFs have been obtained from a triple-sector double annular combustor rig running at simulated ground idle conditions, showing features of flow mixing within the burning rig. Mean temperature and temperature PDFs were measured by CARS to investigate flow characteristics of the recirculation zones.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.11a
• /
• pp.489-492
• /
• 2003

The results of an experiment on the sound absorption of the porous concrete and its influence on the compressive strength are reported in this paper. Two different sizes of coarse aggregate of 5~13, 13~20mm, and the design void ratio of 20, 25 and 30 percent for a given size of aggregate were used. In the compressive strength, an aggregate of the size of 5~13mm is much higher strength than that of the 13~20mm, In the sound absorption experiment, the size of aggregate of 5~l0mm is much higher sound absorption than that of the 13~20mm. The sound absorption ratio was increased as the design void ratio. As a result, Porous concrete sufficiently have the performance of sound absorption.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.9
• /
• pp.837-844
• /
• 2012

We considered an approach in terms of materials for improvement of insulation performance of vehicle rubber hoses. Ethylene propylene rubber(EPDM) for heater hoses in cooling system and acrylic rubber(AR) for intercooler hose in intake system were chosen for mixing for the vibration and noise performance. We modified EPDM and AR through changing compound of base polymer, reinforcement fillers and additives. Dynamic mechanical analysis(DMA) was used to measure viscoelastic properties such as shear modulus and loss factor($tan{\delta}$). Vehicle acceleration test was also conducted to observe indoor changes in insulation performance of hoses.

• Journal of Advanced Marine Engineering and Technology
• /
• v.18 no.1
• /
• pp.41-50
• /
• 1994

동심 이중관내에서 외관내벽의 사각돌출형 조도요소에 의한 비대칭 난류유동과 열전달 특성을, 열전달과 마찰계수에 미치는 조도의 합성효과를 조사하기 위해, 연구하였다. 이론해석에서는 수정 플란틀 혼합길이(mixing length)이론의 난류모델을 속도분포와 마찰계수를 구하는데 사용하였다. 최대 속도지점에서 안쪽과 바깥쪽의 두 속도 형상들은 힘의 평형에 의해 일치시켰다. 그리고나서, 온도분포와 열전달 계수를 계산하였다. 속도형상과 마찰계수들의 해석결과는 반경비 (${\alpha}$)= 0.13, 0.26, 0.4, 그리고 0.56 경우의 실험과 매우 잘 일치하였다. 마찰계수와 Nusselt number에 미치는 반경비, 조도비, 그리고 조도에 대한 피치비 등과 같은 여러 변수들의 효과들을 조사하였다. 본 연구는 일정 조도 요소들이 전체적 효율 측면에서 볼 때 열전달을 우리하게 향상시킨다는 것을 증명하였다.

• Journal of the Korean Vacuum Society
• /
• v.5 no.1
• /
• pp.77-84
• /
• 1996

Silicon deposition by Penning discharge was carried out using a mixture of 5% $SiH_4/H_2$ and Ar gas, and the effects of the deposition conditions(gas mixing raito, substrate temperature. discharge power etc.) on the growth rate, crystallinity and morphology of the films deposited were investigated. The magnetic field(800 G) confined the plasma in the region between the two cathodes and enhanced the discharge current by a factor of a few hundreds below 1 mTorr. The magnetic field-enhanced plasma density resulted in a very large deposition rate of about 300 $\AA$/min at $SiH_4$ flow rate of 0.7 sccm and the substrate temperature of $800^{\circ}C$. Characterization of the films by Raman spectroscopy, X-ray diffraction, and scanning electron microscopy revealed that an epitaxial film with a smooth surface grows above 80$0^{\circ}C$, an amorphous film below $400^{\circ}C$, and a rough polycrystalline film at intermediate temperatures.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1737-1741
• /
• 2008

Dielectrophoretic behavior of semiconducting single-walled carbon nanotubes(SWNT) was investigated theoretically and experimentally. The surface conductance of nanotubes was modulated using anionic and cationic surfactant mixtures. The experimental results indicate that dielectrophoretic behavior of SWNT highly depends on the procedure of mixing two opposite-charged surfactants. Clausius-Mossotti factor was calculated by measuring zeta potentials and solution conductivity. Raman spectroscopy was used to characterize the dielectrophoretically deposited nanotubes arrary. We found that metallic nanotubes were selectively separated from the nanotubes suspension, resulting from modulation of surface conductance of semiconducting SWNT.

• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.860-864
• /
• 2001

Today's industrialized plants are required to reduce SOx emitted from stacks at factories, utility power stations, etc. For this purpose, flue gas desulfurization (FGD) system is installed and gas-gas heater (GGH) is used to play a vital role to reheat the wet treated gas from FGD. The sector plates are located at cold and hot sides of gas gas heater. They serve as sealing to prevent mixing treated and untreated gases. Therefore, the deformation of the sector plate due to its dead weight and gas pressure should be considered as major factor for the sector plate design.