• JSTS:Journal of Semiconductor Technology and Science
• /
• 제1권4호
• /
• pp.248-252
• /
• 2001

A noble single-ended input, double-balanced mixer topology is proposed. The mixer incorporates the common-source amplifier input stage with inductive degeneration for impedance matching. The analysis based on simulations shows that the overall performance of the mixer is excellent and is adjustable by varying the input transistor size to give best characteristics for the given linearity specifications.

• 대한전자공학회논문지TC
• /
• 제41권12호
• /
• pp.103-108
• /
• 2004

본 논문에서는 낮은 LO 입력으로 저 변환손실 특성을 갖는 MIMIC(Millimeter-wave Monolithic Integrated Circuit) V-band up-mixer를 설계 및 제작하였다. Up-mixer는 0.1 ㎛ GaAs PHEMT와 coplanar waveguide (CPW) 전송라인을 사용하여 제작되었다. Up-mixer는 60.4 GHz의 RF 주파수, 2.4 GHz의 IF 주파수와 58 GHz의 LO 주파수에서 동작되도록 설계되었다. Up-mixer는 표준 MIMIC공정을 사용하여 제작되었으며 칩 크기는 2.3 mmxl.6 mm이다. 제작된 up-mixer의 측정결과 입력신호가 -10.25 dBm 이고 LO의 입력 전력이 5.4 dBm 일 때 1.25 dB의 양호한 변환손실 특성을 얻었다. 58 GHz에서 LO 와 RF의 격리특성은 -13.2 dB를 나타내었다. 제작된 V-band up-mixer는 기존에 발표된 밀리미터파 up-mixer에 비하여 낮은 LO 입력 전력과 양호한 변환손실 특성을 나타내었다.

• 한국전자파학회논문지
• /
• 제24권11호
• /
• pp.1047-1054
• /
• 2013

본 논문은 다중 대역 레이더 수신기의 소형화를 위한 이중 모드 주파수 혼합기를 구현하였다. 제안한 혼합기는 역병렬 다이오드(anti-parallel diode)를 이용하였고, 제어 전압 유무에 따라 기본파 혼합기 또는 부고조파 혼합기로 동작한다. 제어 전압을 인가하여 기본파 혼합기로 동작하는 경우, X-대역에서 -10 dB 변환 손실, 2.0 dBm P1dB 특성을 나타내었고, 제어 전압을 인가하지 않은 부고조파 혼합기로 동작하는 경우 K-대역에서 -10 dB 변환 손실, 2.0 dBm P1dB 특성을 나타내었다.

• 한국응용과학기술학회지
• /
• 제24권3호
• /
• pp.219-232
• /
• 2007

In T-mixer crystallization, supersaturation is generated by mixing of another solvent or non-solvent in order to reduce the solubility of the compound. Also, T-mixer is a type of continuous crystallization. In order to induce micro-mixing, two solutions were mixed rapidly by T-mixer, which formed high supersaturation. As the results, mean size of HMX crystals decreased with increasing de-supersaturation rate $(R_s)$. Eventually, HMX particles ranging from 0.5 to $5{\mu}m$ can be obtained by T-mixer crystallization. Mixing efficiency in T-mixer increased with increasing $R_s$ values. In T-mixer crystallization without surfactants, homogeneous nucleation was formed when S and $R_s$ was over 54 and $1.6{\times}10^3/sec$. In T-mixer crystallization with surfactants, homogeneous nucleation was formed when S and $R_s$ was over 26 and 7.4/sec.

• 한국전자파학회논문지
• /
• 제16권2호
• /
• pp.139-143
• /
• 2005

본 논문에서는 $CMOS\;0.18\;{\mu}m $ 공정을 이용하여 MB-OFDM UWB용 RF 수신기의 광대역 LNA와 Down-mixer를 설계하였다. 광대역 LNA는 $3\~5\;GHz$의 대역에서 전력이득은 $12.8\~15dB$, 잡음지수는 2.6 dB 이하, 그리고 입력 IP3는 4 GHz에서 -8 dBm의 특성을 나타내고, 입출력 반사손실은 10 dB 이하의 특성을 보인다. Down-mixer는 3개의 채널에서 2 dB 이하의 gain flatness를 나타내고, 변환이득은 $-2.9\~0.4dB$의 특성을 나타낸다. 또한 LO의 leakage와 feedthrough는 각각 30 dB 이상의 특성을 나타내도록 설계하였다.

• 한국추진공학회지
• /
• 제20권1호
• /
• pp.58-68
• /
• 2016

고체 로켓 모타의 충전을 위한 추진제 믹서는 가장 중요한 장비 중 하나다. 추진제 믹서는 수출통제 품목으로 해외로부터 직접 구입하기 어렵다. 이에 당사에서는 해외 수출 통제(Export Licence) 품목으로 수입이 불가능한 어려운 상황에 대처하기 위해 국산화 개발을 진행하였다. 본 논문을 통해 일반적인 추진제용 믹서의 소개와 당사의 믹서 국산화 개발과정을 나타내었다. 또한, 블레이드-블레이드, 블레이드-보울 벽사이의 간극 측정 및 ADINA 해석을 통해 국산화 개발된 추진제 믹서의 설계를 검증하였으며 개발과제에 적용함을 기술하였다.

• 한국ITS학회 논문지
• /
• 제15권4호
• /
• pp.143-152
• /
• 2016

본 논문에서는 이동통신대역에 사용 가능한 MMIC(Monolithic Microwave Integrated Circuits) 이중평형 주파수 혼합기(Double Balanced Mixer)를 설계하고 LO 전력 최적화에 관한 연구를 다룬다. 본 논문에서 제안한 MMIC 이중평형 주파수 혼합기의 칩 크기는 $4{\times}4$[$mm^2$]이며, GaAs 기판을 사용한다. LO power에 대한 최적화 연구는 입력신호의 선형성에 대한 Input IP3(IIP3)에 대해서 진행하며, LO power+16 dBm을 인가했을 때 IIP3성분이 약 23.2dBm을 보여 가장 우수한 특성을 나타내었다.

• 상하수도학회지
• /
• 제22권3호
• /
• pp.351-358
• /
• 2008

The modified in-line mixer which was suggested in this study for small water treatment facilities was evaluated on the performance of coagulation. For the objectives of this research, computational fluid dynamics(CFD) simulation was applied for analysis of flow characteristics within the modified in-line mixer. For verifying the results of CFD simulation, wet tests for the pilot plant were conducted. The wet test was to measure the actual coagulant dispersion distribution on the overall cross-section at a distance of 5.5D from the chemical injection point. From the results of CFD simulation and wet test, it was shown that the coagulant dispersion within the modified in-line mixer was occurred more uniformly than within the existing PDM(Pump diffusion Mixer). The results have confirmed the modified in-line mixer had several advantages compared with the existing PDM in terms of dispersion efficiency.

• 상하수도학회지
• /
• 제13권3호
• /
• pp.107-115
• /
• 1999

The general objectives of this study are to develop a new biofilm reactor equipped with agitating mixer and to evaluated the treatment efficiency of the reactor. The experimental tests were conducted to estimate the oxygen transfer rate of agitating mixer system. Results are as follows. 1. The oxygen transfer coefficient, KLa, was $8.94hr{-1}$ and $7.50hr{-1}$ at 500rpm and 250rpm of agitating mixer speed, respectively. When the agitating mixer was used in the biofilm reactor, 22.5% and 18.8% of oxygen transfer rates were increased at 500rpm and 250rpm, respectively. 2. The removal rate of BOD and CODcr was decreased by 5.0% when the agitating mixer speed was varied from low (250rpm) to high level (500rpm). 3. The concentration of attached biomass had a difference of 5.0% to 7.3%, whereas that of suspended biomass had a difference of about 15.0%, depending upon variation of the agitating mixer speed.

• 한국기계기술학회지
• /
• 제13권3호
• /
• pp.65-71
• /
• 2011

The concrete mixer truck which is in charge of raw materials in civil engineering construction of the concrete loading, transport, placement, is used $6m^3$, $7m^3$ class in domestic(Korea). But in the case of the international construction fields are utilized $9m^3$ or above class because of the large-scale engineering and construction circumstances. In this paper, to develop a large $9m^3$ class mixer drum and the mixer drum in order to complement the technical and discharge that is responsible for stirring the blades by applying optimal design through implementation of the optimal shape of the concrete in the drum maintenance and placement of high-quality effects on increasing discharge such as advanced conventional drum mixer is to secure and differentiated technology. Large, heavy weight in development and uphold the drum mixer vehicle sub-frame is required to settle the design of the existing class mixer drum frames per $6m^3$ changed to account for changes in slope and length using CATIA V5 3D modeling work was performed.