• The Journal of Korean Medicine
• /
• v.15 no.2 s.28
• /
• pp.46-91
• /
• 1994

l. Backgrounds of Studies Cerebrovascular accident. one of the three major causes of death among audults with cardiopathy and malignancy, has been on the increase in korea while it is on the decrease in European countries and Japan. Types of stroke undergo changes caused by prolongment of life expectancy. and social and economic variety. More patients of ischemic stroke show a tendency to increase now than those of hemorrhagic stroke in the past. Many clinical studies on medical cerebrovascular and oriental stroke of paralysis have been published. but few clinical studies on therapeutics of integrated oriental and western medicine are to be found. So I have made an attempt to study clinical observations and therapeutic responses of ischemic stroke under integrated oriental and western medicine. 2.Methods. Among the patients admitted into the clinic of Joong-Poong, Woo-Suk University Hospital from May 1. 1993 until April 30. 1994 those 56 patients who were diagnosed as ischemic stroke on Computed Tomography(CT) and showed no dubious symptom after examination of coagulation and bleeding time were classified into the following six steps and treated: l)diagnosis 2)emergency treatment 3)basic treatment 4)treatment of risk and provoking factors. and preceeding disease 5)complications and conservative therapy 6)rehabilitation. For a period of basic treatment both herb medication and urokinase therapy were applied at the same time. Intravenous injection has been given at a unit of 300.000 dosage a day as urokinase therapy during basic treatment. If they showed any dubious symptom in glucose tolerance test. fructose 500ml and urokinase 300.000 dosage were mixed and injected. In case of no symptom 5% DW 500ml was mixed with urokinase 300.000 unit. and injected at a speed of 15gtt per minute. 3. Results and Conclusions 1) The level of ambulation has been improved from 42.9% when admitted to 73.2% when discharged in the degree of recovery. The level of severe function disorder has been remarkably decreased from 55.4% when admitted to 19.6% when discharged. 2) The treatment effect on the basis of therapeutic response of clinical and subjective symptom shows as follows: 7.1% Excellent. 35.7% Good. 37.5% Effective. 10.7% Stationary. and 8.9% Aggravated. The total recovery above effective shows 80.3%. Judging from the above results I think it proper to develop the model of better preventing and treating ischemic stroke through effective therapeutic and clinical studies of integrated oriental and western medicine.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.26 no.2
• /
• pp.133-145
• /
• 1996

Aspirating or swallowing foreign bodies is a common occurrence. If they are wholly or partly radiopaque, their localization in and progress through the gastrointestinal tract can be more effective. Of the dental origin foreign materials swallowed, the most common things are fragments of anterior maxillary partial denture. But the radiopacity of denture base resins is not sufficient to determine the location of the objects. The purpose of this study was to develop a radiopaque dental acrylic resin, which has clinically detectible radiopacity with minimal change of mechanical properties and color. The radiopacity, color change(CIE 6..E) and microhardness of acrylic resins were determined after mixing barium sulfate or iodide compound. Thermocycling course was conducted to determine the change of characteristic of resins after using for a long time in the mouth. Five or ten percent of barium sulfate to total weight of cured material was mixed with heat curing dental acrylic resin or chemically curing orthodontic resin. In the case of iodide compound, the mixing ratio was two or three percent. After mixing the high radiopaque materials, resin was cured to 20×20×2 mm plate, polished with #600 sand paper and finally polished with Microcloth(Buehler). The specimens were thermocycled in 5 and 55 t distilled water for 2,000 times, and the measurement of radiopacity, color and Vickers hardness was repeated every 500 times thcrmocycling. The radiopacity of specimens on the X -ray films was measured with densitometer(X-rite). The color change was detennined with differential colorimeter(Model TC-6FX, Tokyo Denshoku), and the Vickers hardness number was measured with microhardness tester(Mitsuzawa). The following results were obtained : 1. All the three variables, the kinds of acrylic resins, the mixing or the kinds of high radiopaque materials and thermocycling, had combined effect on the radiopacity of the dental acrylic resins(p<0.0l). 2. The two variables, the mixing or the kinds of high radiopaque materials and thermocycling, influenced on the radiopacity of the dental acrylic resins(p<0.01). But the kinds of acrylic resins did not influence on the color change of mixed dental acrylic resins(p>0.05). 3. Each of the three variables, the kinds of acrylic resins, the mixing or the kinds of high radiopaque materials and thermocycling, influenced on the radiopacity of dental acrylic resins(p<0.0l). 4. The high radiopaque materials used in this study did not yield clinically usable radiopacity, and the color change was great after mixing those materials.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.7
• /
• pp.49-62
• /
• 2022

The hollow modular concrete block reinforced foundation method is one of the ground reinforcement foundation methods that uses hexagonal honeycomb-shaped concrete blocks with mixed crushed rock to reinforce soft grounds. It then forms an artificial layered ground that increases bearing capacity and reduces settlement. The hollow modular honeycomb-shaped concrete block is a geometrically economical, stable structure that distributes forces in a balanced way. However, the behavioral characteristics of hollow modular concrete block reinforced foundations are not yet fully understood. In this study, a bearing capacity test is performed to analyze the reinforcement effectiveness of the hollow modular concrete block through the laboratory model tests. From the load-settlement curve, punching shear failure occurs under the unfilled sand condition (A-1-N). However, the filled sand condition (A-1-F) shows a linear curve without yielding, confirming the reinforcement effect is three times higher than that of unreinforced ground. The bearing capacity equation is proposed for the parts that have contact pressure under concrete, vertical stress of hollow blocks, and the inner skin friction force from horizontal stress by confining effect based on the schematic diagram of confining effect inside a hollow modular concrete block. As a result of calculating the bearing capacity, the percentage of load distribution for contact force on the area of concrete is about 65%, vertical force on the area of hollow is 16.5% and inner skin friction force of area of the inner wall is about 18.5%. When the surcharge load is applied to the concrete part, the vertical stress occurs on the area of the hollow part by confining effect first. Then, in the filled sand in the hollow where the horizontal direction is constrained, the inner skin friction force occurs by the horizontal stress on the inner wall of the hollow modular concrete block. The inner skin friction force suppresses the punching of the concrete part and reduces contact pressure.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.11
• /
• pp.1146-1153
• /
• 2008

Numerical simulation was carried out to study the trichloroethylene (TCE) degradation by permeable reactive barrier (PRB), and revealed the effect of concentration of TCE, iron medium mass, and concentration of iron-reducing bacteria (IRB). Newly developed model was based on axial dispersion reactor model with chemical and biological reaction terms and was implemented using MATLAB ver R2006A for the numerical solutions of dispersion, convection, and reactions over column length and elapsed time. The reaction terms include reactions of TCE degradation by zero-valent iron (ZVI, Fe$^0$) and ferrous iron (Fe$^{2+}$). TCE concentration in the column inlet was maintained as 10 mg/L. Equation for Fe$^0$ degradation includes only TCE reaction term, while one for Fe$^{2+}$ has chemical and biological reaction terms with TCE and IRB, respectively. Two coupled equations eventually modeled the change of TCE concentration in a column. At Fe$^0$ column, TCE degradation rate was found to be more than 99% from 60 hours to 235 hours, and declined to less than 1% in 1,365 hours. At the Fe$^{2+}$ and IRB mixed column, TCE degradation rate was equilibrated at 85.3% after 210 hours and kept it constant. These results imply that the ferrous iron produced by IRB has lowered the TCE degradation efficiency than ZVI but it can have higher longevity.http://kci.go.kr/kciportal/ci/contents/ciConnReprerSearchPopup.kci#

• Journal of Food Hygiene and Safety
• /
• v.28 no.2
• /
• pp.152-157
• /
• 2013

We evaluated the anti-diabetic effects of Isaria tenuipes in diabetes mellitus type 2. For the experiments, the diabetic animal model OLETF rats were divided to 4 groups: Isaria tenuipes was administered mixed with the high fat diet 45% at dose levels of 0.0%, 0.1%, 1.0%, and 5.0% for 4 weeks. All animals have free access to water and high fat diet 45%. The diabetic clinical markers, including clinical signs, body weight and food intake, organ weights, blood glucose level, insulin level and HOMA-IR index, oral glucose tolerance test, GLUT4 mRNA and protein were measured at a time. After administration for 4 weeks, the blood glucose levels, insulin levels and HOMA-IR index of test groups were decreased compared with control group in dose-dependent manner. The body weight and diet consumptions were reduced in control group at 4 weeks. The treatments of Isaria tenuipes also showed high expression of GLUT4 mRNA and protein in the muscle of OLETF rats. The results suggest that Isaria tenuipes has anti-hyperglycemic effect attenuating blood glucose in the animal model of type 2 diabetes and might be useful as a functional diet for human diabetic diseases.

• Korean Chemical Engineering Research
• /
• v.48 no.5
• /
• pp.632-637
• /
• 2010

Liquid-liquid equilibrium data for the quaternary system water +tetrahydrofuran + butyl acetate + isoamyl alcohol mixture were measured at 298.15 K and atmospheric pressure. Binodal curves, tie-lines, distribution, and selectivity for the quaternary system have been determined in order to investigate the effect of using binary solvents, butyl acetate and isoamyl alcohol, on extracting tetrahydrofuran from aqueous solution. In addition, these experimental tie-line data were also compared with the values predicted by the UNIFAC model. For the quaternary system, an average root-mean-square deviation for the system in 75/25, 50/50, and 25/75 mass ratios as mixed solvents are(3.35, 5.21 and 5.65) %, respectively.

• Korean Journal of Food Science and Technology
• /
• v.44 no.5
• /
• pp.648-652
• /
• 2012

The sensory characteristics of nine commercially distilled soju samples were determined by sensory descriptive analysis. Eight aroma attributes, as well as four flavor/taste attributes, and six mouth-feel related attributes were evaluated by 9 judges. The descriptive data set was initially analyzed for a significant overall product effect by employing a three-way mixed model analysis of variance (judges, samples, and replications) as well as two-way interactions, with judges treated as random. In addition, correlations between mean attribute ratings were calculated, and a principal component analysis (PCA) of the mean attribute ratings employing the covariance matrix was conducted. Based on the PCA, distilled soju samples were primarily separated along the first principal component, which accounted for 66% of the total variance between the samples, with high intensities of 'alcohol taste' and 'alcohol aroma' versus 'yeast aroma'. The second principal component accounted for 14% of the total variance. Soju containing high alcohol showed stronger intensities of 'bitterness', 'alcohol taste', 'alcohol aroma', as well as all mouth-feel attributes.

• Korean Journal of Agricultural Science
• /
• v.38 no.2
• /
• pp.257-262
• /
• 2011

The aim of this study was to identify the polymorphism on fatty acid synthase (FASN) gene and its association with fat traits and fatty acid composition in Hanwoo. We genotyped a SNP (g.16024G${\rightarrow}$A) detected in Exon34 of FASN on 90 Hanwoo steers by PCR RFLP. A linear mixed model revealed an association of g.16024G${\rightarrow}$A with total body fat contents (P=0.006), while there is no significant effect between g.16024G${\rightarrow}$A and other traits (IMF, BF and fatty acid composition). Regression coefficient and $R^2$ of the SNP was -1.5 kg and 0.36 in this anslysis. Expecially, AA type of g.16024G${\rightarrow}$A bas a less amount of body fat (1.5 kg) than GG type of the SNP in Hanwoo. In conclusion, this study indicates an important role for FASN gene in determining body fat content in Hanwoo.

• Asian-Australasian Journal of Animal Sciences
• /
• v.30 no.8
• /
• pp.1081-1085
• /
• 2017

Objective: Previously, we reported quantitative trait loci (QTLs) affecting backfat thickness (BFT) traits on pig chromosome 5 (SW1482-SW963) in an F2 intercross population between Landrace and Korean native pigs. The aim of this study was to evaluate glutamate receptor-interacting protein 1 (GRIP1) as a positional candidate gene underlying the QTL affecting BFT traits. Methods: Genotype and phenotype analyses were performed using the 1,105 $F_2$ progeny. A mixed-effect linear model was used to access association between these single nucleotide polymorphism (SNP) markers and the BFT traits in the $F_2$ intercross population. Results: Highly significant associations of two informative SNPs (c.2442 T>C, c.3316 C>G [R1106G]) in GRIP1 with BFT traits were detected. In addition, the two SNPs were used to construct haplotypes that were also highly associated with the BFT traits. Conclusion: The SNPs and haplotypes of the GRIP1 gene determined in this study can contribute to understand the genetic structure of BFT traits in pigs.

• The Korean Journal of Food And Nutrition
• /
• v.30 no.6
• /
• pp.1222-1228
• /
• 2017

In the current study, we investigated the inhibitory activity of water soluble ${\beta}-glucan$ from oat (Avena sativa) against various digestive enzymes such as ${\alpha}-glucosidase$, sucrase, maltase and glucoamylase. Inhibition of these enzymes involved in the absorption of disaccharide can significantly decrease the post-prandial increase of blood glucose level after a mixed carbohydrate diet. The ${\beta}-glucan$ had the highest documented rate of small intestinal sucrase inhibitory activity (2.83 mg/mL, $IC_{50}$) relevant for potentially managing post-prandial hyperglycemia. Furthermore, we evaluated the effects of ${\beta}-glucan$ on the level of post-prandial blood glucose in animal model. The post-prandial blood glucose levels were tested two hours after sucrose/starch administration, with and without ${\beta}-glucan$ (100, and 500 mg/kg-body weight). The maximum blood glucose levels (Cmax) of ${\beta}-glucan$ administration group were decreased by about 23% (from $219.06{\pm}27.82$ to $190.44{\pm}13.18$, p<0.05) and 10% (from $182.44{\pm}13.77$ to $165.64{\pm}10.59$, p<0.01) in starch and sucrose loading test, respectively, when compared to control in pharmacodynamics study. The ${\beta}-Glucan$ administration significantly lowered the mean, maximum, and minimum level of post-prandial blood glucose at 30 min after meal. In view of the foregoing, it is felt that our findings suggest that ${\beta}-glucan$ from oat serves to reduce post-prandial blood glucose rise secondary to slower absorption of glucose in the small intestine, via carbohydrate hydrolyzing enzymes inhibition.