• 제어로봇시스템학회:학술대회논문집
• /
• 1986.10a
• /
• pp.200-204
• /
• 1986

Particle size distribution in a Continuous Mixed Suspension Mixed Crystal Removal (CMSMPR) crystallizer has been analyzed using the Population Balance (PB) model. This method presents difficulties when the growth rate of crystal depends on the crystal size. Recent studies indicate that in many cases the growth rate is dependent on size when the crystal sizes are small. In this study, a Residence Time Distribution(RTD) model was proposed to take the size dependence into account together with an appropriate numerical scheme. When compared with the approximate results based on PB model, RTD model results showed improvements also a nucleation effect which is normally unimportant for steady state analysis. Start-up data for NaCl-Water-Ethanol system was compared with computed values.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.254-259
• /
• 2009

The mixed cooling dryer has been developed significantly by adopting both advantages of cooling dryers and desiccant dryers. In this study, it is introduced that the desired effect, such as drying rate period reduction and energy-saving, could be achieved only by adding the desiccant dryer if an existing cooling dryer is used. The experiment should be conducted for quite long time due to the material selection, so it is regrettable that there are not enough data.

• Journal of the Optical Society of Korea
• /
• v.20 no.1
• /
• pp.204-211
• /
• 2016

Oil pollution seriously endangers the biological environment and human health. Due to the diversity of oils and the complexity of oil composition, it is of great significance to identify the oil contaminants. The 3-D fluorescence spectrum combined with a second order correction algorithm was adopted to measure an oil mixture with overlapped fluorescence spectra. The self-weighted alternating trilinear decomposition (SWATLD) is a kind of second order correction, which has developed rapidly in recent years. Micellar solutions of #0 diesel, #93 gasoline and ordinary kerosene in different concentrations were made up. The 3-D fluorescence spectra of the mixed oil solutions were measured by a FLS920 fluorescence spectrometer. The SWATLD algorithm was applied to decompose the spectrum data. The predict concentration and recovery rate obtained by the experiment show that the SWATLD algorithm has advantages of insensitivity to component number and high resolution for mixed oils.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• v.4 no.4
• /
• pp.249-253
• /
• 2000

Data obtained from a cruise from 4~12 December, 1998 was analyzed to estimate the mixing effects of wind, surface cooling, and tide. A band denoting a mixing area with a temperature difference of less than 1$^{\circ}C$ between the sea surface and the bottom extended 40~60 km from the coast into the open sea, following 125$^{\circ}$ 30\` E in longitude. This band was divided into two areas; a well-mixed area close to the coast and a stratified region in the open sea. The mixing effect due to the wind was only 2%, yet the mixing effect due to the tides was about 68%. This indicates that surface cooling and tides were the major factors involved in the mixing mechanism on the west coast during the cooling season.

• Journal of the Korean Society of Safety
• /
• v.15 no.2
• /
• pp.13-21
• /
• 2000

Under the mixed mode loading, it has been known that the influence of non-singular terms in the stress fields is serious, because the critical distance, ${\gamma}_o$ - the distance of nonlinear elastic region near the crack tip has no negligible value. In this paper, it has been studied on the influence of non-singular terms, T-stress, and the case of T=0, ${\sigma}cos^2{\beta}$, ${\sigma}cos(2{\beta})$ and $0.05{\sigma}cos(2{\beta})$, under uniaxial tension and compression. It has been seen that the T-stress of ${\sigma}cos(2{\beta})$ has better than others as comparing to the experimental data.

• Asian-Australasian Journal of Animal Sciences
• /
• v.11 no.6
• /
• pp.642-647
• /
• 1998

A Poisson error model as a generalized linear mixed model (GLMM) has been suggested for genetic analysis of counted observations. One of the assumptions in this model is the normality for random effects. Since this assumption is not always appropriate, a more flexible model is needed. For count traits, a Poisson hierarchical generalized linear model (HGLM) that does not require the normality for random effects was proposed. In this paper, a Poisson-Gamma HGLM was examined along with corresponding analytical methods. While a difficulty arises with Poisson GLMM in making inferences to the expected values of observations, it can be avoided with the Poisson-Gamma HGLM. A numerical example with simulated embryo yield data is presented.

• Journal of Pharmaceutical Investigation
• /
• v.12 no.4
• /
• pp.101-111
• /
• 1982

The effect of salt addition to MO-CTB mixed micelle was studied. The logarithm of cmcs obtained from above experiment is a linear function of the logarithm of the sum of the cmc and the concentration of added salt. In order to investigate the relation of the color change and the structure, the measurement of conductance to the mixed micelle has been carried out. To see the color change and conductance data obtained in the present study, structure A is more probable one to the micelles having the ${\lambda}_{max}$ 376nm.

• Communications for Statistical Applications and Methods
• /
• v.16 no.6
• /
• pp.971-978
• /
• 2009

Poisson generalized linear mixed models(GLMMs) have been widely used for the analysis of clustered or correlated count data. For the inference marginal likelihood, which is obtained by integrating out random effects is often used. It gives maximum likelihood(ML) estimator, but the integration is usually intractable. In this paper, we propose how to obtain the ML estimator via Laplace approximation based on hierarchical-likelihood (h-likelihood) approach under the Poisson GLMMs. In particular, the h-likelihood avoids the integration itself and gives a statistically efficient procedure for various random-effect models including GLMMs. The proposed method is illustrated using two practical examples and simulation studies.

• Analytical Science and Technology
• /
• v.17 no.3
• /
• pp.278-281
• /
• 2004

The separation and concentration method of gold(III) and platium(IV) ions from other ions has been investigated using chelate resin, Amberlite IRC 718 in the mixed solution. The adsorption and desorption capacity of ions on the chelate resin in mixed solution were measured at room temperature. Using the data, gold(III) and platium(IV) ions were separated and concentrated in the ions solution.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.4
• /
• pp.101-107
• /
• 1998

A three-dimensional multi-phase flow is simulated around a smooth tire. This simulation is conducted by solving Navier-Stokes equation with a k-$\varepsilon$ turbulent model. The numerical calculations are carried out by modeling a multi-phase free surface flow mixed with air and water at the inlet. The numerical solutions show an intuitively resonable behavior of water around a moving tire. The calculated pressure around the tire surface along the moving direction is presented. The moving velocities of the tire are chosen to be 30, 40, 60, and 70 km/h. The numerically simulated pressures around the tire are compared with existing experimental data. The comparison shows a new possible tool of analyzing a hydroplaning phenomenon for an automobile tire by means of a computational fluid dynamics.