• Journal of the Korean Chemical Society
• /
• v.16 no.1
• /
• pp.50-55
• /
• 1972

The mechanical degradation of $poly(\alpha-methyl$ styrene) in several mixed solvents (chlorobenzene-n-butyl alcohol, chlorobenzene-sec-butyl alcohol, chlorobenzene-Kerosene, chlorobenzene-methylketone) was studied using the capillary flow method. The velocity constant of scission reaction (K) and the limited degree of polymerization (g) were compared at the same value of [${\eta}$], which is considered as the parameter of molecular dimension of polymers in solution. As results, (K) did not change much, even if the species and the volume fraction of poor(non-) solvents changed, while the value of (g) changed according to the species of poor (non-) solvents and the value of [${\eta}$] these results were discussed.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.09a
• /
• pp.454-457
• /
• 2003

A new approach for groundwater treatment combines a permeable Fe(0) barrier to breakdown higher chlorinated solvents like PCE and TCE with a downgradient aerobic biological treatment system to biotransform less chlorinated solvents, such as DCE and vinyl chloride (VC). The expected bacterial performance downgradient of an Fe(0) barrier was evaluated through laboratory batch experiments with a toluene-degrading mixed culture that cometabolically transforms cis-1,2-DCE and VC. The amount of cis-1,2-DCE (initially at 2,000 ppb) and VC (initially at 2,000 ppb) transformed was controlled by the initial toluene (20,000 ppb) concentration. VC was removed much more effectively than Cis-1,2-DCE, and a higher toluene concentration in comparison to the co-substrate concentrations was needed for complete co-substrate removal. Overall, the coupling of an Fe(0) barrier and subsequent biodegradation appears feasible for remediation of complex mixtures of chlorinated solvents and petroleum hydrocarbons in groundwater

• Journal of the Korean Chemical Society
• /
• v.17 no.3
• /
• pp.207-212
• /
• 1973

The mechanical degradation of poly (-vinylacetate) in several mixed solvents (dioxane-n-butanol, dioxane-sec-butanol, dioxane-ethyleneglycol, dioxane-kerosene.) was studied using the capillary flow method. The velocity constant of scission reaction (k) and the limited degree of polymerization (g) were compared at the same value of [${\eta}$], which is considered as the parameter of molecular dimension of polymers in solution. As result, (k) did not change much, even if the species and the volume fraction of poor (non-) solvents changed, while the value of (g) changed according to the species of poor solvents and the value of [${\eta}$]. From the facts described above, It follows that the limited degree of polymerization (g) were affected by the composition and distribution of mixed solvent molecules around the polymer chain, and the value of $\alpha$ (at [${\eta}$] = $KM^a$) in the polymer solution.

• Polymer(Korea)
• /
• v.31 no.2
• /
• pp.98-104
• /
• 2007

The expansion behavior of polystyrene (PS) chains with various molecular weights has been investigated above Flory $\Theta$temperature by viscometry after dissolving in the three different mixed solvents systems such as benzene/n-heptane, 1,4-dioxane/isopropanol, and 1,4-dioxane/n-heptane. Two different regimes are observed as increasing temperature: one regime is for the expansion of chain and the other is for the contraction. For the higher molecular weight sample of PS, the higher peak temperature showing its maximum expansion is obtained. Within a certain system of Ps/mixed solvents, the $\tau/\tau_c$ parameter shows universality for the variation of molecular weight. But while each system of Ps/mixed solvents has shown its own different slope, the universality breaks down in the overall system of mixed solvents. However after introducing a new empirical $b^{2/3}\tau/\tau_c$ parameter, all data points of three different systems have dropt on one master curve and the universality of chain expansion has recovered again. Here $\tau$ and $\tau_c$ are defined as $(T-\Theta)/\Theta$ and $(\Theta-T_c)/T_c$, respectively and $T_c$ is the critical solution temperature, and b of Schultz-Flory equation is corresponding to the effective slope in the plot of $1/T_c$ against $1/M_w^{1/2}$.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.7 no.1
• /
• pp.3-18
• /
• 1997

This study was conducted to evaluate desorption efficiencies by types of desorption solvent for polar and non-polar organic compounds collected on activated charcoal tubes. Analytes tested were toluene, m-xylene, isobutyl alcohol, n-butyl alcohol, cellosolve acetate, and butyl cellosolve. Three different concentration levels of spiked sample were made. Types of cosolvent mixed with the main solvent, $CS_2$, were methanol, pentanol, and dimethylformamide (DMF) and the cosolvent for methylenechloride was methanol. The amounts of cosolvent added to the main solvent were 1, 5, and 10% by volume (v/v%), respectively. The results were as follows: 1. For all mixed solvents except 1% methanol and 1% pentanol with $CS_2$, desorption efficiency significantly increased, compared with that of $CS_2$ alone. 2. Desorption efficiency increased by increasing analyte loading on charcoal tube regardless of mixed solvents used and the material polarity. 3. For all cosolvents mixed with $CS_2$ by 1% and 5% volume, desorption efficiency for non-polar compound was significantly higher than that of polar compound. For the 10% mixed solvents and the methylenechloride mixed with methanol, the results were opposite. 4. The lowest mean percent bias of 4.79% was obtained from the 5% DMF-$CS_2$ mixed solvent, followed by 4.82% from the 10% DMF-$CS_2$ solvent while the highest bias of 23.26% was from the solvent of $CS_2$ alone. Based on the results of this study, in order to increase desorption efficiency, it is recommended to add such cosolvents as methanol, pentanol, and DMF to $CS_2$, preferably 5% by volume for analyzing polar compounds collected in charcoal tubes.

• Membrane Journal
• /
• v.25 no.1
• /
• pp.48-59
• /
• 2015

This paper reports a fabrication of poly(L-lactic acid) (PLLA) scaffold membranes through phase separation process using pure and mixed solvents. Chloroform and 1,4-dioxane were used as pure solvents and mixed solvents were obtained by mixing the pure solvents together. Morphologies, mechanical properties and mass transfer characteristics of the scaffold membranes were investigated through SEM, stress-strain test and glucose diffusion test. Scaffold membranes from the solution with pure chloroform showed solid-wall pore structure. In contrast, nano-fibrous membranes were fabricated from the solution with pure 1,4-dioxane. In case of mixed solvents, the scaffold membranes showed various structures with changing composition of the solvents. When 1,4-dioxane content was lower than 20 wt% in the solvent, scaffold membrane showed solid-wall pore structure. When the content was 20 wt%, scaffold membranes with macropores with the maximum size of $100{\mu}m$ was obtained. In the concentration range of 1,4-dioxane over 25 wt%, the scaffold membranes showed nano-fibrous structures. In this range, the fibers showed different diameters with changing composition of the solvent. The minimum fiber diameter was about $15{\mu}m$, when 1,4-dioxane composition was 80 wt%. These results indicate that the composition of the solvent showed a significant effect on the structure of scaffold membrane.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.9
• /
• pp.3267-3273
• /
• 2011

Ag(I) carboxylate gelators with mixed-ligands were systemically investigated to understand the mechanism of the organic gel formation. The gelators constructed 3-D networks of nanometer-sized thin fibers which facilitated gel formation in various aromatic organic solvents, even at very low concentrations. The loss of reflection peaks in the X-ray diffraction data indicated the reduction of strong interactions between the long alkyl chains as the Ag(I) carboxylates formed gels by maximizing their interactions with the organic solvents. The gelation temperature ($T_{gel}$) was measured to explore the interaction between the gelator molecules and solvents depending on their composition and concentration. Based on the gelation phenomena, a dissociation/re-association mechanism was proposed.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.9 no.1
• /
• pp.1-6
• /
• 2003

The partitioning behavior of five printing ink solvents was studied in various cookie ingredients before and after baking which had different water content and different structure. Solvents were ethyl acetate, hexane, isopropanol, methyl ethyl ketone, and toluene which represent different characteristic functional groups. Gas chromatography (G.C.) was used to measure partitioning values at $25^{\circ}C$ on each raw and baked cookie ingredients. Baking condition of cookie ingredients was $260^{\circ}C$ for 10 min. In cookie ingredients, decreases in water content generally affected Kp of polar solvents, but did not affect that of the non-polar solvents. However, as water content decreased in the cookie ingredient, the Kp of the non-polar and polar solvents showed mixed results.

• Fashion & Textile Research Journal
• /
• v.7 no.6
• /
• pp.680-688
• /
• 2005

This study was carried out to investigate on the removal of oily and particulate soils from silk fabrics. Various kinds of solvents were used on the removal of two kinds of soils treated into the silk fabrics. The removal of oily soil was analyzed by liquid scintillation counting method, and the removal of oil and carbon particulate mixed soils was evaluated by measuring of reflectance on the surface of soiled fabrics with/without drysoap in solvent washing by Terg-o-tometer. The surfaces of fabrics were also observed by SEM before and after washing. The results obtained were as follows : oily soils were removed efficiently by various kinds of solvents regardless of kinds of silk fabrics in short washing time. The removal effect of solvents from the soiled silk fabrics were high in the order of isopropyl alcohol>trichloroethane>monochlorobenzene>ethylether>perchloroethylene. Oil and carbon particulate mixed soils could be efficiently removed by adding of drysoap in solvent washing. The removal of mixed soils were increased drastically with rinsing and increased drysoap. The removal of soils was more efficiently removed from degummed silk fabrics than from the raw silk fabrics.

• Analytical Science and Technology
• /
• v.8 no.4
• /
• pp.481-486
• /
• 1995

Quenching experiments by photoinduced electron transfer between a charged donor and a neutral acceptor were carried out in acetonitrile, dichloromethane and mixed solvents of acetonitrile and dichloromethane. Tris(2, 2'-bipyridine) ruthenium(II) ($[Ru(bpy)_3]^{2+}$) which has 2+ charge and dicyanobis (2, 2'-bipyridine) ruthenium(II) ($Ru(bpy)_2(CN)_2$) which has no charge were used as electron donors, and a series of tris(${\beta}$-diketonato) ruthenium (III) was used as acceptor. In dichloromethane, $[Ru(bpy)_3]^{2+}$ and its counter ions ($ClO{_4}^-$) form ion pair. In the estimate of ${\Delta}G$ of electron transfer, the electrostatic potential between counter ions and product ion pair produced by electron transfer must be taken into account. A similar effect of counter ions was found in mixed solvents of 10, 30, 50, 70 and 90% acetonitrile ratio in volume. The effect of counter ion on ${\Delta}G$ became smaller with the increase in acetonitrile ratio. The result in mixed solvents suggests that $[Ru(bpy)_3]^{2+}$ and its counter ions form ion pair even in 90% acetonitrile solution.